List of works - Roland Franz

A study on the equivalence of olive oil and the EU official substitute test media for migration testing at high temperatures

scientific article published on 01 October 1999

Alternative fatty food simulants and diffusion kinetics of nylon 12 food packaging.

scientific article published in October 2003

Alternative fatty food simulants for migration testing of polymeric food contact materials

scientific article published on March 1992

Considerations for and Guidance to Testing and Evaluating Migration/Release of Nanoparticles from Polymer Based Nanocomposites

scientific article published on 05 June 2020

Contamination Levels in Recollected PET Bottles from Non-Food Applications and their Impact on the Safety of Recycled PET for Food Contact

scientific article published on 28 October 2020

Correlation of foodstuffs with ethanol-water mixtures with regard to the solubility of migrants from food contact materials.

scientific article published in January 2014

Development and validation of analytical methods for monomeric and oligomeric migrants from nylon 12 packaging materials.

scientific article published in April 2003

Dialkylketones in Paperboard Food Contact Materials-Method of Analysis in Fatty Foods and Comparative Migration into Liquid Simulants Versus Foodstuffs

scientific article published on 18 February 2020

European survey on post-consumer poly(ethylene terephthalate) (PET) materials to determine contamination levels and maximum consumer exposure from food packages made from recycled PET.

scientific article

Evaluation of migration models that might be used in support of regulations for food-contact plastics.

scientific article published in January 2005

Exposure assessment of food enzymes

scientific article published in November 2016

Investigation into the Potential Migration of Nanoparticles from Laponite-Polymer Nanocomposites

MIGRESIVES: a research project on migration from adhesives in food-packaging materials in support of European legislation and standardization.

scientific article published on December 2009

Microplastic in bottled natural mineral water - literature review and considerations on exposure and risk assessment

scientific article published on 19 November 2018

Migration measurement and modelling from poly(ethylene terephthalate) (PET) into soft drinks and fruit juices in comparison with food simulants.

scientific article published in August 2008

Migration modelling from food-contact plastics into foodstuffs as a new tool for consumer exposure estimation.

scientific article

Migration of antimony from PET bottles into beverages: determination of the activation energy of diffusion and migration modelling compared with literature data

scientific article

Migration of nanoparticles from plastic packaging materials containing carbon black into foodstuffs.

scientific article

Migration of oligomers from PET: determination of diffusion coefficients and comparison of experimental versus modelled migration.

scientific article

Note for Guidance For the Preparation of an Application for the Safety Assessment of a Substance to be used in Plastic Food Contact Materials

scientific article published in July 2008

Oligomers in polyethylene furanoate - identification and quantification approach via LC-UV LC-MS response ratio

scientific article published on 12 October 2018

Presentation and experimental verification of a physico-mathematical model describing the migration across functional barrier layers into foodstuffs.

scientific article published in August 1997

Recycled poly(ethylene terephthalate) for direct food contact applications: challenge test of an inline recycling process

scientific article published on 01 May 2002

Review and priority setting for substances that are listed without a specific migration limit in Table 1 of Annex 1 of Regulation 10/2011 on plastic materials and articles intended to come into contact with food

scientific article published on 10 June 2020

SUPERSEDED: Safety assessment of the substance poly((R)-3-hydroxybutyrate-co-(R)-3-hydroxyhexanoate) for use in food contact materials

scientific article published on 20 July 2018

Safety assessment of the active substance polyacrylic acid, sodium salt, cross-linked, for use in active food contact materials

scientific article published on 08 November 2018

Safety assessment of the active substance selenium nanoparticles, for use in active food contact materials

scientific article published on 12 January 2018

Safety assessment of the active substances carboxymethylcellulose, acetylated distarch phosphate, bentonite, boric acid and aluminium sulfate, for use in active food contact materials

scientific article published on 02 February 2018

Safety assessment of the mixture of methyl‐branched and linear C14–C18 alkanamides, derived from fatty acids, for use in food contact materials

scientific article published in February 2017

Safety assessment of the process 'BTB PET DIRECT IV +', used to recycle post-consumer PET into food contact materials

scientific article published on 19 April 2018

Safety assessment of the process 'Gneuss 1', based on Gneuss technology, used to recycle post-consumer PET into food contact materials

scientific article published on 13 July 2018

Safety assessment of the process 'Gneuss 2', based on Gneuss technology, used to recycle post-consumer PET into food contact materials

scientific article published on 13 July 2018

Safety assessment of the process 'Morssinkhof Plastics', used to recycle high-density polyethylene and polypropylene crates for use as food contact materials

scientific article published on 15 January 2018

Safety assessment of the process ‘Krones’ used to recycle post‐consumer PET into food contact materials

scientific article published in October 2017

Safety assessment of the process ‘Märkische Faser’, based on NGR technology, used to recycle post‐consumer PET into food contact materials

scientific article published in July 2017

Safety assessment of the substance (butadiene, styrene, methyl methacrylate, butyl acrylate) copolymer cross‐linked with divinylbenzene or 1,3‐butanediol dimethacrylate for use in food contact materials

scientific article published in November 2016

Safety assessment of the substance 1,2,3,4‐tetrahydronaphthalene‐2,6‐dicarboxylic acid, dimethyl ester for use in food contact materials

scientific article published in May 2017

Safety assessment of the substance Ln 1,4-benzene dicarboxylic acid (with Ln = La, Eu, Gd, Tb) for use in food contact materials

scientific article published on 07 November 2018

Safety assessment of the substance N,N-bis(2-hydroxyethyl)stearylamine partially esterified with saturated C16/C18 fatty acids, for use in food contact materials

scientific article published on 13 March 2020

Safety assessment of the substance benzophenone-3,3',4,4'-tetracarboxylic dianhydride, for use in food contact materials

scientific article published on 17 July 2020

Safety assessment of the substance dimethyl carbonate for use in food contact materials

scientific article published in July 2017

Safety assessment of the substance isobutane, for use in food contact materials

scientific article published on 12 January 2018

Safety assessment of the substance phosphorous acid, mixed 2,4‐bis(1,1‐dimethylpropyl)phenyl and 4‐(1,1‐dimethylpropyl)phenyl triesters for use in food contact materials

scientific article published in May 2017

Safety assessment of the substance phosphorous acid, triphenyl ester, polymer with alpha-hydro-omega-hydroxypoly[oxy(methyl-1,2-ethanediyl)], C10-16 alkyl esters, for use in food contact materials

scientific article published on 16 May 2019

Safety assessment of the substance poly((R)-3-hydroxybutyrate-co-(R)-3-hydroxyhexanoate) for use in food contact materials

scientific article published on 25 January 2019

Safety assessment of the substance trimellitic acid, tris (2-ethylhexyl) ester, for use in food contact materials

scientific article published on 17 October 2019

Safety assessment of the substance ‘Tungsten Oxide’ for use in food contact materials

scientific article published in January 2017

Safety evaluation of a β‐amylase food enzyme obtained from wheat (Triticum spp.)

scientific article published in May 2017

Safety evaluation of food enzyme glucan 1,4-α-maltohydrolase produced with a genetically modified Bacillus subtilis (strain MAM)

scientific article published on 02 May 2018

Safety evaluation of food enzyme xylanase from a genetically modified Bacillus subtilis (strain LMG S-27588)

scientific article published on 02 May 2018

Safety evaluation of the food enzyme alpha-amylase from a genetically modified Bacillus licheniformis (strain NZYM-AN)

scientific article published on 06 July 2018

Safety evaluation of the food enzyme aqualysin 1 from a genetically modified Bacillus subtilis (strain LMGS 25520)

scientific article published on 02 May 2018

Safety evaluation of the food enzyme endo-1,4-β-xylanase from a genetically modified Aspergillus niger (strain XEA)

scientific article published on 27 April 2018

Safety evaluation of the food enzyme endo‐1,4‐β‐xylanase from genetically modified Aspergillus niger strain XYL

scientific article published in May 2017

Safety evaluation of the food enzyme glucose oxidase from a genetically modified Aspergillus oryzae (strain NZYM-KP)

scientific article published on 06 July 2018

Safety evaluation of the food enzyme maltogenic amylase from a genetically modified Bacillus subtilis (strain NZYM-SM)

scientific article published on 02 May 2018

Safety evaluation of the food enzyme peroxidase obtained from soybean (Glycine max) hulls

scientific article published in December 2017

Safety evaluation of the food enzyme pullulanase from Pullulanibacillus naganoensis strain AE‐PL

scientific article published in October 2017

Safety evaluation of the food enzyme pullulanase from genetically modified Bacillus subtilis strain NZYM‐AK

scientific article published in August 2017

Safety evaluation of the food enzyme xylanase from a genetically modified Bacillus subtilis strain TD160(229)

scientific article published on 22 January 2018

Safety evaluation of the food enzyme α-amylase from a genetically modified Aspergillus niger (strain NZYM-SB)

scientific article published on 20 July 2018

Safety evaluation of the food enzyme α-amylase from a genetically modified Bacillus licheniformis (strain NZYM-AV)

scientific article published on 12 July 2018

Safety evaluation of the food enzyme β‐amylase from genetically modified Bacillus licheniformis strain NZYM‐JA

scientific article published in August 2017

Safety evaluation of the food enzyme β‐amylase obtained from barley (Hordeum vulgare)

scientific article published in May 2017

Safety evaluation of the food enzyme β‐amylase obtained from soybean (Glycine max)

scientific article published in May 2017

Safety of benzophenone to be used as flavouring

scientific article published in November 2017

Safety of ethyl acrylate to be used as flavouring

scientific article published in November 2017

Scientific Opinion of Flavouring Group Evaluation 406 (FGE.406): (S)-1-(3-(((4-amino-2,2-dioxido-1H-benzo[c][1,2,6]thiadiazin-5-yl)oxy)methyl)piperidin-1-yl)-3-methylbutan-1-one

scientific article published on 23 February 2018

Scientific Opinion of Flavouring Group Evaluation 407 (FGE.407): 4‐amino‐5‐(3‐(isopropylamino)‐2,2‐dimethyl‐3‐oxopropoxy)‐2‐methylquinoline‐3‐carboxylic acid

scientific article published in January 2017

Scientific Opinion of Flavouring Group Evaluation 410 (FGE.410): 4’,5,7‐trihydroxyflavanone from chemical group 25 (phenol derivatives containing ring‐alkyl, ring‐alkoxy, and side‐chains with an oxygenated functional group)

scientific article published in November 2017

Scientific Opinion of Flavouring Group Evaluation 500 (FGE.500): rum ether

scientific article published on 24 August 2017

Scientific Opinion on Flavouring Group Evaluation 203, Revision 2 (FGE.203Rev2): α,β-unsaturated aliphatic aldehydes and precursors from chemical subgroup 1.1.4 of FGE.19 with two or more conjugated double-bonds and with or without additional non-co

scientific article published on 20 July 2018

Scientific Opinion on Flavouring Group Evaluation 208 Revision 2 (FGE.208Rev2): Consideration of genotoxicity data on alicyclic aldehydes with α,β‐unsaturation in ring/side‐chain and precursors from chemical subgroup 2.2 of FGE.19

scientific article published in May 2017

Scientific Opinion on Flavouring Group Evaluation 226 Revision 1 (FGE.226Rev1): consideration of genotoxicity data on one α,β‐unsaturated aldehyde from chemical subgroup 1.1.1(b) of FGE.19

scientific article published in May 2017

Scientific Opinion on Flavouring Group Evaluation 302 (FGE.302): N‐(2‐methylcyclohexyl)‐2,3,4,5,6‐pentafluoro‐benzamide from Chemical Group 30

scientific article published in March 2017

Scientific Opinion on Flavouring Group Evaluation 49, Revision 1 (FGE.49Rev1): xanthine alkaloids from the priority list

scientific article published in April 2017

Scientific Opinion on Flavouring Group Evaluation 57, Revision 1 (FGE.57Rev1): consideration of isopulegone and three flavouring substances evaluated by JECFA (55th meeting)

scientific article published in March 2017

Scientific Opinion on Flavouring Group Evaluation 63, Revision 3 (FGE.63Rev3): aliphatic secondary alcohols, ketones and related esters evaluated by JECFA (59th and 69th meetings) structurally related to saturated and unsaturated aliphatic seconda...

scientific article published in January 2017

Scientific Opinion on Flavouring Group Evaluation 7, Revision 5 (FGE.07Rev5): saturated and unsaturated aliphatic secondary alcohols, ketones and esters of secondary alcohols and saturated linear or branched‐chain carboxylic acids from chemical gr...

scientific article published in March 2017

Scientific Opinion on Flavouring Group Evaluation 73, Revision 4 (FGE.73Rev4): consideration of alicyclic alcohols, aldehydes, acids and related esters evaluated by JECFA (59th and 63rd meeting) structurally related to primary saturated or unsatur...

scientific article published in November 2017

Scientific Opinion on Flavouring Group Evaluation 74, Revision 4 (FGE.74Rev4): Consideration of aliphatic sulphides and thiols evaluated by JECFA (53rd and 61st meeting) structurally related to aliphatic and alicyclic mono-, di-, tri- and polysulphi

scientific article published on 20 March 2018

Scientific opinion of Flavouring Group Evaluation 502 (FGE.502): grill flavour ‘Grillin’ 5078’

scientific article published in September 2017

Scientific opinion of Flavouring Group Evaluation 503 (FGE.503): grill flavour ‘Grillin’ CB‐200SF’

scientific article published in September 2017

Scientific opinion on flavouring group evaluation 77, revision 3 (FGE.77Rev3): consideration of pyridine, pyrrole and quinoline derivatives evaluated by JECFA (63rd meeting) structurally related to pyridine, pyrrole, indole and quinoline derivatives

scientific article published on 25 April 2018

Testing and evaluation of recycled plastics for food packaging use--possible migration through a functional barrier

scientific article published on 01 July 1994

The application of a predictive migration model for evaluating the compliance of plastic materials with European food regulations.

scientific article published in July 1996

Update of the risk assessment of 'wood flour and fibres, untreated' (FCM No 96) for use in food contact materials, and criteria for future applications of materials from plant origin as additives for plastic food contact materials

scientific article published on 29 November 2019

List of works by Roland Franz

A study on the equivalence of olive oil and the EU official substitute test media for migration testing at high temperatures

Alternative fatty food simulants and diffusion kinetics of nylon 12 food packaging.

Alternative fatty food simulants for migration testing of polymeric food contact materials

Considerations for and Guidance to Testing and Evaluating Migration/Release of Nanoparticles from Polymer Based Nanocomposites

Contamination Levels in Recollected PET Bottles from Non-Food Applications and their Impact on the Safety of Recycled PET for Food Contact

Correlation of foodstuffs with ethanol-water mixtures with regard to the solubility of migrants from food contact materials.

Development and validation of analytical methods for monomeric and oligomeric migrants from nylon 12 packaging materials.

Dialkylketones in Paperboard Food Contact Materials-Method of Analysis in Fatty Foods and Comparative Migration into Liquid Simulants Versus Foodstuffs

European survey on post-consumer poly(ethylene terephthalate) (PET) materials to determine contamination levels and maximum consumer exposure from food packages made from recycled PET.

Evaluation of migration models that might be used in support of regulations for food-contact plastics.

Exposure assessment of food enzymes

Investigation into the Potential Migration of Nanoparticles from Laponite-Polymer Nanocomposites

MIGRESIVES: a research project on migration from adhesives in food-packaging materials in support of European legislation and standardization.

Microplastic in bottled natural mineral water - literature review and considerations on exposure and risk assessment

Migration measurement and modelling from poly(ethylene terephthalate) (PET) into soft drinks and fruit juices in comparison with food simulants.

Migration modelling from food-contact plastics into foodstuffs as a new tool for consumer exposure estimation.

Migration of antimony from PET bottles into beverages: determination of the activation energy of diffusion and migration modelling compared with literature data

Migration of nanoparticles from plastic packaging materials containing carbon black into foodstuffs.

Migration of oligomers from PET: determination of diffusion coefficients and comparison of experimental versus modelled migration.

Note for Guidance For the Preparation of an Application for the Safety Assessment of a Substance to be used in Plastic Food Contact Materials

Oligomers in polyethylene furanoate - identification and quantification approach via LC-UV LC-MS response ratio

Presentation and experimental verification of a physico-mathematical model describing the migration across functional barrier layers into foodstuffs.

Recycled poly(ethylene terephthalate) for direct food contact applications: challenge test of an inline recycling process

Review and priority setting for substances that are listed without a specific migration limit in Table 1 of Annex 1 of Regulation 10/2011 on plastic materials and articles intended to come into contact with food

SUPERSEDED: Safety assessment of the substance poly((R)-3-hydroxybutyrate-co-(R)-3-hydroxyhexanoate) for use in food contact materials

Safety assessment of the active substance polyacrylic acid, sodium salt, cross-linked, for use in active food contact materials

Safety assessment of the active substance selenium nanoparticles, for use in active food contact materials

Safety assessment of the active substances carboxymethylcellulose, acetylated distarch phosphate, bentonite, boric acid and aluminium sulfate, for use in active food contact materials

Safety assessment of the mixture of methyl‐branched and linear C14–C18 alkanamides, derived from fatty acids, for use in food contact materials

Safety assessment of the process 'BTB PET DIRECT IV +', used to recycle post-consumer PET into food contact materials

Safety assessment of the process 'Gneuss 1', based on Gneuss technology, used to recycle post-consumer PET into food contact materials

Safety assessment of the process 'Gneuss 2', based on Gneuss technology, used to recycle post-consumer PET into food contact materials

Safety assessment of the process 'Morssinkhof Plastics', used to recycle high-density polyethylene and polypropylene crates for use as food contact materials

Safety assessment of the process ‘Krones’ used to recycle post‐consumer PET into food contact materials

Safety assessment of the process ‘Märkische Faser’, based on NGR technology, used to recycle post‐consumer PET into food contact materials

Safety assessment of the substance (butadiene, styrene, methyl methacrylate, butyl acrylate) copolymer cross‐linked with divinylbenzene or 1,3‐butanediol dimethacrylate for use in food contact materials

Safety assessment of the substance 1,2,3,4‐tetrahydronaphthalene‐2,6‐dicarboxylic acid, dimethyl ester for use in food contact materials

Safety assessment of the substance Ln 1,4-benzene dicarboxylic acid (with Ln = La, Eu, Gd, Tb) for use in food contact materials

Safety assessment of the substance N,N-bis(2-hydroxyethyl)stearylamine partially esterified with saturated C16/C18 fatty acids, for use in food contact materials

Safety assessment of the substance benzophenone-3,3',4,4'-tetracarboxylic dianhydride, for use in food contact materials

Safety assessment of the substance dimethyl carbonate for use in food contact materials

Safety assessment of the substance isobutane, for use in food contact materials

Safety assessment of the substance phosphorous acid, mixed 2,4‐bis(1,1‐dimethylpropyl)phenyl and 4‐(1,1‐dimethylpropyl)phenyl triesters for use in food contact materials

Safety assessment of the substance phosphorous acid, triphenyl ester, polymer with alpha-hydro-omega-hydroxypoly[oxy(methyl-1,2-ethanediyl)], C10-16 alkyl esters, for use in food contact materials

Safety assessment of the substance poly((R)-3-hydroxybutyrate-co-(R)-3-hydroxyhexanoate) for use in food contact materials

Safety assessment of the substance trimellitic acid, tris (2-ethylhexyl) ester, for use in food contact materials

Safety assessment of the substance ‘Tungsten Oxide’ for use in food contact materials

Safety evaluation of a β‐amylase food enzyme obtained from wheat (Triticum spp.)

Safety evaluation of food enzyme glucan 1,4-α-maltohydrolase produced with a genetically modified Bacillus subtilis (strain MAM)

Safety evaluation of food enzyme xylanase from a genetically modified Bacillus subtilis (strain LMG S-27588)

Safety evaluation of the food enzyme alpha-amylase from a genetically modified Bacillus licheniformis (strain NZYM-AN)

Safety evaluation of the food enzyme aqualysin 1 from a genetically modified Bacillus subtilis (strain LMGS 25520)

Safety evaluation of the food enzyme endo-1,4-β-xylanase from a genetically modified Aspergillus niger (strain XEA)

Safety evaluation of the food enzyme endo‐1,4‐β‐xylanase from genetically modified Aspergillus niger strain XYL

Safety evaluation of the food enzyme glucose oxidase from a genetically modified Aspergillus oryzae (strain NZYM-KP)

Safety evaluation of the food enzyme maltogenic amylase from a genetically modified Bacillus subtilis (strain NZYM-SM)

Safety evaluation of the food enzyme peroxidase obtained from soybean (Glycine max) hulls

Safety evaluation of the food enzyme pullulanase from Pullulanibacillus naganoensis strain AE‐PL

Safety evaluation of the food enzyme pullulanase from genetically modified Bacillus subtilis strain NZYM‐AK

Safety evaluation of the food enzyme xylanase from a genetically modified Bacillus subtilis strain TD160(229)

Safety evaluation of the food enzyme α-amylase from a genetically modified Aspergillus niger (strain NZYM-SB)

Safety evaluation of the food enzyme α-amylase from a genetically modified Bacillus licheniformis (strain NZYM-AV)

Safety evaluation of the food enzyme β‐amylase from genetically modified Bacillus licheniformis strain NZYM‐JA

Safety evaluation of the food enzyme β‐amylase obtained from barley (Hordeum vulgare)

Safety evaluation of the food enzyme β‐amylase obtained from soybean (Glycine max)

Safety of benzophenone to be used as flavouring

Safety of ethyl acrylate to be used as flavouring

Scientific Opinion of Flavouring Group Evaluation 406 (FGE.406): (S)-1-(3-(((4-amino-2,2-dioxido-1H-benzo[c][1,2,6]thiadiazin-5-yl)oxy)methyl)piperidin-1-yl)-3-methylbutan-1-one

Scientific Opinion of Flavouring Group Evaluation 407 (FGE.407): 4‐amino‐5‐(3‐(isopropylamino)‐2,2‐dimethyl‐3‐oxopropoxy)‐2‐methylquinoline‐3‐carboxylic acid

Scientific Opinion of Flavouring Group Evaluation 410 (FGE.410): 4’,5,7‐trihydroxyflavanone from chemical group 25 (phenol derivatives containing ring‐alkyl, ring‐alkoxy, and side‐chains with an oxygenated functional group)

Scientific Opinion of Flavouring Group Evaluation 500 (FGE.500): rum ether

Scientific Opinion on Flavouring Group Evaluation 203, Revision 2 (FGE.203Rev2): α,β-unsaturated aliphatic aldehydes and precursors from chemical subgroup 1.1.4 of FGE.19 with two or more conjugated double-bonds and with or without additional non-co

Scientific Opinion on Flavouring Group Evaluation 208 Revision 2 (FGE.208Rev2): Consideration of genotoxicity data on alicyclic aldehydes with α,β‐unsaturation in ring/side‐chain and precursors from chemical subgroup 2.2 of FGE.19

Scientific Opinion on Flavouring Group Evaluation 226 Revision 1 (FGE.226Rev1): consideration of genotoxicity data on one α,β‐unsaturated aldehyde from chemical subgroup 1.1.1(b) of FGE.19

Scientific Opinion on Flavouring Group Evaluation 302 (FGE.302): N‐(2‐methylcyclohexyl)‐2,3,4,5,6‐pentafluoro‐benzamide from Chemical Group 30

Scientific Opinion on Flavouring Group Evaluation 49, Revision 1 (FGE.49Rev1): xanthine alkaloids from the priority list

Scientific Opinion on Flavouring Group Evaluation 57, Revision 1 (FGE.57Rev1): consideration of isopulegone and three flavouring substances evaluated by JECFA (55th meeting)

Scientific Opinion on Flavouring Group Evaluation 63, Revision 3 (FGE.63Rev3): aliphatic secondary alcohols, ketones and related esters evaluated by JECFA (59th and 69th meetings) structurally related to saturated and unsaturated aliphatic seconda...

Scientific Opinion on Flavouring Group Evaluation 7, Revision 5 (FGE.07Rev5): saturated and unsaturated aliphatic secondary alcohols, ketones and esters of secondary alcohols and saturated linear or branched‐chain carboxylic acids from chemical gr...