Search filters

List of works by Christian Leinenbach

A Novel Fe-Mn-Si Shape Memory Alloy With Improved Shape Recovery Properties by VC Precipitation

scientific article

Active vacuum brazing of CNT films to metal substrates for superior electron field emission performance

scientific article published on 6 February 2015

Characterization of the Fe-rich corner of Al-Fe-Si-Ti.

scientific article

Combined in situ synchrotron micro X-ray diffraction and high-speed imaging on rapidly heated and solidified Ti–48Al under additive manufacturing conditions

Determination of Liquidus Temperature in Sn–Ti–Zr Alloys by Viscosity, Electrical Conductivity and XRD Measurements

Determination of liquidus temperature in Ti-rich alloys of the Fe–Ni–Ti system obtained by DTA, electrical conductivity and XRD measurements

scientific article

Development of Rolling Technology for an Iron-Based Shape-Memory-Alloy

Experimental investigation and thermodynamic assessment of the Cu–Sn–Ti ternary system

scientific article

Experimental study of the FeAl–NiAl–TiAl section

scientific article

Experimental study of the Fe–Ni–Ti system

scientific article

In Situ Synchrotron X-Ray Diffraction and Small Angle X-Ray Scattering Studies on Rapidly Heated and Cooled Ti-Al and Al-Cu-Mg Alloys Using Laser-Based Heating

In Situ and Ex Situ Characterization of the Microstructure Formation in Ni-Cr-Si Alloys during Rapid Solidification-Toward Alloy Design for Laser Additive Manufacturing

scientific article published on 10 May 2020

Influence of oxidation treatment on fatigue and fatigue-induced damage of commercially pure titanium

scientific article published on 31 March 2009

Iron-based shape memory alloys for civil engineering structures: An overview

scientific article

Laser Powder Bed Fusion of Metal Coated Copper Powders

scientific article published on 07 August 2020

Phase equilibria and structural investigations in the Ni-poor part of the system Al-Ge-Ni

scientific article published on September 2012

Phase transformation behavior under uniaxial deformation of an Fe–Mn–Si–Cr–Ni–VC shape memory alloy

Thermal Stress Assessment for Transient Liquid-Phase Bonded Si Chips in High-Power Modules Using Experimental and Numerical Methods

Thermodynamic study and re-assessment of the Ge-Ni system

Paulina is supported by:

About Paulina

Help