List of works - Gürkan Sin

A Model-Based Methodology for Simultaneous Design and Control of a Bioethanol Production Process

A biochemically structured model for ethanol fermentation by Kluyveromyces marxianus: A batch fermentation and kinetic study

scientific article published on 12 May 2011

A critical comparison of systematic calibration protocols for activated sludge models: a SWOT analysis.

scientific article

A dynamic model for cellulosic biomass hydrolysis: a comprehensive analysis and validation of hydrolysis and product inhibition mechanisms

scientific article published on 21 January 2014

A framework for model-based optimization of bioprocesses under uncertainty: Lignocellulosic ethanol production case

article

A generic methodology for the optimisation of sewer systems using stochastic programming and self-optimizing control

scientific article published on 31 March 2015

A model-based methodology for simultaneous design and control of a bioethanol production process

A new approach for modelling simultaneous storage and growth processes for activated sludge systems under aerobic conditions.

scientific article

A new extant respirometric assay to estimate intrinsic growth parameters applied to study plasmid metabolic burden

scientific article published in January 2010

A novel fuzzy-logic control strategy minimizing N2O emissions

scientific article

A novel model-based control strategy for aerobic filamentous fungal fed-batch fermentation processes

scientific article published on 27 February 2017

An efficient approach to automate the manual trial and error calibration of activated sludge models

scientific article published in June 2008

An operational protocol for facilitating start-up of single-stage autotrophic nitrogen-removing reactors based on process stoichiometry

scientific article published in January 2013

Application of a mechanistic model as a tool for on-line monitoring of pilot scale filamentous fungal fermentation processes-The importance of evaporation effects.

scientific article

Application of mechanistic models to fermentation and biocatalysis for next-generation processes.

scientific article published on 21 April 2010

Application of the Morris method for screening the influential parameters of fuzzy controllers applied to wastewater treatment plants.

scientific article

Applying mechanistic models in bioprocess development

scientific article published on January 2013

Assessing reliability of cellulose hydrolysis models to support biofuel process design—Identifiability and uncertainty analysis

article

Assessment of Full-Scale N2O Emission Characteristics and Testing of Control Concepts in an Activated Sludge Wastewater Treatment Plant with Alternating Aerobic and Anoxic Phases

scientific article published on 17 October 2019

Biorefinery Sustainability Analysis

CFD predicted pH gradients in lactic acid bacteria cultivations

scientific article published on 31 December 2018

Calibration of the comprehensive NDHA-N2O dynamics model for nitrifier-enriched biomass using targeted respirometric assays

scientific article

Combining multiway principal component analysis (MPCA) and clustering for efficient data mining of historical data sets of SBR processes

scientific article

Comparison of the modeling approach between membrane bioreactor and conventional activated sludge processes

scientific article published in April 2009

Control of a Biological Nitrogen Removal Process in an Intensified Single Reactor Configuration

Developing a framework for continuous use of models in daily management and operation of WWTPs: a life cycle approach.

scientific article published in January 2008

Dynamic model-based evaluation of process configurations for integrated operation of hydrolysis and co-fermentation for bioethanol production from lignocellulose ⬇️

scientific article published on September 17, 2010

Dynamic modeling and validation of a lignocellulosic enzymatic hydrolysis process--a demonstration scale study

scientific article published on 17 October 2013

Estimation of environment-related properties of chemicals for design of sustainable processes: development of group-contribution+ (GC+) property models and uncertainty analysis

scientific article

Evaluation of the impacts of model-based operation of SBRs on activated sludge microbial community

Extensions to modeling aerobic carbon degradation using combined respirometric-titrimetric measurements in view of activated sludge model calibration

scientific article published on 11 May 2007

Global sensitivity analysis in wastewater treatment plant model applications: prioritizing sources of uncertainty

scientific article published on 20 August 2010

Good modeling practice for PAT applications: propagation of input uncertainty and sensitivity analysis.

scientific article published in July 2009

Group-contribution based property estimation and uncertainty analysis for flammability-related properties.

scientific article published on 16 June 2016

Influence of Scaling and Unfolding in PCA Based Monitoring of Nutrient Removing Batch Process

Introducing mechanistic models in Process Analytical Technology education

scientific article published on 01 May 2009

Introducing uncertainty analysis of nucleation and crystal growth models in Process Analytical Technology (PAT) system design of crystallization processes

scientific article published on 11 June 2013

Mechanistic Fermentation Models for Process Design, Monitoring, and Control

scientific article published on 21 August 2017

Model-based evaluation of an on-line control strategy for SBRs based on OUR and ORP measurements.

scientific article

Model-based optimisation of the biological performance of a sidestream MBR.

scientific article published in January 2007

Modelling nitrite in wastewater treatment systems: a discussion of different modelling concepts.

scientific article published on January 2008

Modified calibration protocol evaluated in a model-based testing of SBR flexibility

scientific article published on 14 August 2010

Multi-criteria evaluation of wastewater treatment plant control strategies under uncertainty.

scientific article published on 24 June 2008

Multivariate Principal Component Analysis and Case-Based Reasoning for monitoring, fault detection and diagnosis in a WWTP.

scientific article

Nitrous oxide production in autotrophic nitrogen removal granular sludge: A modeling study

scientific article published on 06 February 2019

Sensitivity analysis of autotrophic N removal by a granule based bioreactor: Influence of mass transfer versus microbial kinetics

scientific article published on 02 August 2012

Significance of settling model structures and parameter subsets in modelling WWTPs under wet-weather flow and filamentous bulking conditions

scientific article published on 11 June 2014

Systematic design of membership functions for fuzzy-logic control: A case study on one-stage partial nitritation/anammox treatment systems.

scientific article published on 25 June 2016

Systematic model development for partial nitrification of landfill leachate in a SBR.

scientific article

Transient response of aerobic and anoxic activated sludge activities to sudden substrate concentration changes

scientific article published in May 2004

Uncertainty analysis in WWTP model applications: a critical discussion using an example from design

scientific article published on 16 April 2009

Uncertainty analysis of the CPA and a quadrupolar CPA equation of state – With emphasis on CO2

Uncertainty and sensitivity analysis of control strategies using the benchmark simulation model No1 (BSM1).

scientific article published in January 2009

Uncertainty estimation in deep learning‐based property models: Graph neural networks applied to the critical properties

scientific article published in 2022

Use of continuous lactose fermentation for ethanol production by Kluveromyces marxianus for verification and extension of a biochemically structured model

scientific article published on 20 December 2012

Wastewater treatment modelling: dealing with uncertainties

scientific article published on January 2009

pH variation and influence in an autotrophic nitrogen removing biofilm system using an efficient numerical solution strategy

scientific article

List of works by Gürkan Sin

A Model-Based Methodology for Simultaneous Design and Control of a Bioethanol Production Process

A biochemically structured model for ethanol fermentation by Kluyveromyces marxianus: A batch fermentation and kinetic study

A critical comparison of systematic calibration protocols for activated sludge models: a SWOT analysis.

A dynamic model for cellulosic biomass hydrolysis: a comprehensive analysis and validation of hydrolysis and product inhibition mechanisms

A framework for model-based optimization of bioprocesses under uncertainty: Lignocellulosic ethanol production case

A generic methodology for the optimisation of sewer systems using stochastic programming and self-optimizing control

A model-based methodology for simultaneous design and control of a bioethanol production process

A new approach for modelling simultaneous storage and growth processes for activated sludge systems under aerobic conditions.

A new extant respirometric assay to estimate intrinsic growth parameters applied to study plasmid metabolic burden

A novel fuzzy-logic control strategy minimizing N2O emissions

A novel model-based control strategy for aerobic filamentous fungal fed-batch fermentation processes

An efficient approach to automate the manual trial and error calibration of activated sludge models

An operational protocol for facilitating start-up of single-stage autotrophic nitrogen-removing reactors based on process stoichiometry

Application of a mechanistic model as a tool for on-line monitoring of pilot scale filamentous fungal fermentation processes-The importance of evaporation effects.

Application of mechanistic models to fermentation and biocatalysis for next-generation processes.

Application of the Morris method for screening the influential parameters of fuzzy controllers applied to wastewater treatment plants.

Applying mechanistic models in bioprocess development

Assessing reliability of cellulose hydrolysis models to support biofuel process design—Identifiability and uncertainty analysis

Assessment of Full-Scale N2O Emission Characteristics and Testing of Control Concepts in an Activated Sludge Wastewater Treatment Plant with Alternating Aerobic and Anoxic Phases

Biorefinery Sustainability Analysis

CFD predicted pH gradients in lactic acid bacteria cultivations

Calibration of the comprehensive NDHA-N2O dynamics model for nitrifier-enriched biomass using targeted respirometric assays

Combining multiway principal component analysis (MPCA) and clustering for efficient data mining of historical data sets of SBR processes

Comparison of the modeling approach between membrane bioreactor and conventional activated sludge processes

Control of a Biological Nitrogen Removal Process in an Intensified Single Reactor Configuration

Developing a framework for continuous use of models in daily management and operation of WWTPs: a life cycle approach.

Dynamic model-based evaluation of process configurations for integrated operation of hydrolysis and co-fermentation for bioethanol production from lignocellulose ⬇️

Dynamic modeling and validation of a lignocellulosic enzymatic hydrolysis process--a demonstration scale study

Estimation of environment-related properties of chemicals for design of sustainable processes: development of group-contribution+ (GC+) property models and uncertainty analysis

Evaluation of the impacts of model-based operation of SBRs on activated sludge microbial community

Extensions to modeling aerobic carbon degradation using combined respirometric-titrimetric measurements in view of activated sludge model calibration

Global sensitivity analysis in wastewater treatment plant model applications: prioritizing sources of uncertainty

Good modeling practice for PAT applications: propagation of input uncertainty and sensitivity analysis.

Group-contribution based property estimation and uncertainty analysis for flammability-related properties.

Influence of Scaling and Unfolding in PCA Based Monitoring of Nutrient Removing Batch Process

Introducing mechanistic models in Process Analytical Technology education

Introducing uncertainty analysis of nucleation and crystal growth models in Process Analytical Technology (PAT) system design of crystallization processes

Mechanistic Fermentation Models for Process Design, Monitoring, and Control

Model-based evaluation of an on-line control strategy for SBRs based on OUR and ORP measurements.

Model-based optimisation of the biological performance of a sidestream MBR.

Modelling nitrite in wastewater treatment systems: a discussion of different modelling concepts.

Modified calibration protocol evaluated in a model-based testing of SBR flexibility

Multi-criteria evaluation of wastewater treatment plant control strategies under uncertainty.

Multivariate Principal Component Analysis and Case-Based Reasoning for monitoring, fault detection and diagnosis in a WWTP.

Nitrous oxide production in autotrophic nitrogen removal granular sludge: A modeling study

Sensitivity analysis of autotrophic N removal by a granule based bioreactor: Influence of mass transfer versus microbial kinetics

Significance of settling model structures and parameter subsets in modelling WWTPs under wet-weather flow and filamentous bulking conditions

Systematic design of membership functions for fuzzy-logic control: A case study on one-stage partial nitritation/anammox treatment systems.

Systematic model development for partial nitrification of landfill leachate in a SBR.

Transient response of aerobic and anoxic activated sludge activities to sudden substrate concentration changes

Uncertainty analysis in WWTP model applications: a critical discussion using an example from design

Uncertainty analysis of the CPA and a quadrupolar CPA equation of state – With emphasis on CO2

Uncertainty and sensitivity analysis of control strategies using the benchmark simulation model No1 (BSM1).

Uncertainty estimation in deep learning‐based property models: Graph neural networks applied to the critical properties

Use of continuous lactose fermentation for ethanol production by Kluveromyces marxianus for verification and extension of a biochemically structured model

Wastewater treatment modelling: dealing with uncertainties

pH variation and influence in an autotrophic nitrogen removing biofilm system using an efficient numerical solution strategy