Search filters

List of works by Markos Petousis

3D Printed Thermoelectric Polyurethane/Multiwalled Carbon Nanotube Nanocomposites: A Novel Approach towards the Fabrication of Flexible and Stretchable Organic Thermoelectrics

scientific article published on 26 June 2020

An Innovatory Surgical Technique for Submacular Hemorrhage Displacement by Means of a Bioengineering Perspective

scientific article published in 2021

Decoration of SiO<sub>2</sub> and Fe<sub>3</sub>O<sub>4</sub> Nanoparticles onto the Surface of MWCNT-Grafted Glass Fibers: A Simple Approach for the Creation of Binary Nanoparticle Hierarchical and Multifunctional Composite Interphases

scientific article published on 13 December 2020

Individualized Ophthalmic Exoplants by Means of Reverse Engineering and 3D Printing Technologies for Treating High Myopia Complications with Macular Buckles

scientific article published on 22 October 2020

Mechanical Properties of 3D-Printed Acrylonitrile-Butadiene-Styrene TiO2 and ATO Nanocomposites

scientific article published on 17 July 2020

Mechanical response assessment of antibacterial PA12/TiO<sub>2</sub> 3D printed parts: parameters optimization through artificial neural networks modeling

scientific article published on 21 May 2022

Multi-Functional 3D-Printed Vat Photopolymerization Biomedical-Grade Resin Reinforced with Binary Nano Inclusions: The Effect of Cellulose Nanofibers and Antimicrobial Nanoparticle Agents

scientific article published on 06 May 2022

On the Strain Rate Sensitivity of Fused Filament Fabrication (FFF) Processed PLA, ABS, PETG, PA6, and PP Thermoplastic Polymers

scientific article published on 06 December 2020

Sustainable Additive Manufacturing: Mechanical Response of Polyamide 12 over Multiple Recycling Processes

scientific article published in 2021

The Mechanical and Physical Properties of 3D-Printed Materials Composed of ABS-ZnO Nanocomposites and ABS-ZnO Microcomposites

scientific article published on 25 June 2020

Three-Dimensional (3D) Conductive Network of CNT-Modified Short Jute Fiber-Reinforced Natural Rubber: Hierarchical CNT-Enabled Thermoelectric and Electrically Conductive Composite Interfaces

scientific article published on 11 June 2020

Three-Dimensional Printed Antimicrobial Objects of Polylactic Acid (PLA)-Silver Nanoparticle Nanocomposite Filaments Produced by an In-Situ Reduction Reactive Melt Mixing Process

scientific article published on 02 September 2020

Paulina is supported by:

About Paulina

Help