Boric acid (H3BO3) as flux agent of clay-based ceramics, B2O3 effect in clay thermal behavior and resultant ceramics properties

Ceramic behavior of ball clay with gadolinium oxide (Gd 2 O 3 ) addition

Dense alumina-mullite composite ceramics from alumina and spodumene-albite feldspar binary mixtures: Processing and properties

Dense mullite zirconia composites obtained from the reaction sintering of milled stoichiometric alumina zircon mixtures by SPS

Dense mullite–zirconia–zirconium titanate ceramic composites by reaction sintering

scholarly article by Nicolás Maximiliano Rendtorff Birrer et al published January 2016 in Ceramics International

Densification of lightweight aluminum borate ceramics by direct sintering of milled powders

Effect of the addition of mullite–zirconia to the thermal shock behavior of zircon materials

article

Evaluation of Non Crystalline Phase in AZS Refractories by XRD Methods

Extended and local structural characterization of a natural and 800°C fired Na-montmorillonite–Patagonian bentonite by XRD and Al/Si XANES

Extended and local structural description of a kaolinitic clay, its fired ceramics and intermediates: An XRD and XANES analysis

Firing transformations of an argentinean calcareous commercial clay

Halloysite nanotube and its firing products: Structural characterization of halloysite, metahalloysite, spinel type silicoaluminate and mullite

Low (and negative) thermal expansion Al2TiO5 materials and Al2TiO5 - 3Al2O3.2SiO2 - ZrTiO4 composite materials. Processing, initial zircon proportion effect, and properties

Mechanical and fracture properties of zircon–mullite composites obtained by direct sintering

Mechanochemical stabilization and sintering of nanocrystalline the (ZrO2)0.97(Y2O3)0.03solid solution from pure oxides

Molecular Mechanics Study of Cyclic and Unsymmetrical Diborane(4) Compounds

Mullite (3Al2O3·2SiO2) ceramics obtained by reaction sintering of rice husk ash and alumina, phase evolution, sintering and microstructure

Mullite–zirconia–zircon composites: Properties and thermal shock resistance

Non isothermal kinetic study of the aluminium titanate formation in alumina-titania mixtures

Plasma Dissociated Zircon (PDZ) Processing; Influence of the Zr:Si Ratio in the Composition, Microstructure and Thermal Re-Crystallization

Quantitative firing transformations of a triaxial ceramic by X-ray diffraction methods

Rapid prototyping of a complex model for the manufacture of plaster molds for slip casting ceramic

Talc, Spodumene and Calcium Carbonate Effect as Secondary Fluxes in Triaxial Ceramic Properties

Thermal behavior (TG-DTA-TMA), sintering and properties of a kaolinitic clay from Buenos Aires Province, Argentina

scholarly article by María Susana Conconi et al published June 2019 in Cerâmica

Thermal behavior of Mullite–Zirconia–Zircon composites. Influence of Zirconia phase transformation

Thermal behavior of samarium oxide – Ball clay mixtures for high macroscopic neutron capture cross section ceramic materials

Thermal shock resistance and fatigue of Zircon–Mullite composite materials

Viscosity and Thermal Evolution of Density and Wetting Angle of a Commercial Glaze by Means of Hot Stage Microscopy

Volcanic ash as flux in clay based triaxial ceramic materials, effect of the firing temperature in phases and mechanical properties

Zirconia Reinforcement of Cement Free Alumina Refractory Castables by Two Routes

Zirconia toughening of mullite–zirconia–zircon composites obtained by direct sintering