Application of Nanosilicon to the Sintering of Mg-Mg2Si Interpenetrating Phases Composite

Approximant-based orientation determination of quasicrystals using electron backscatter diffraction

scientific article published on 14 August 2020

Assignment of chiral elemental crystal structures using Kikuchi diffraction

Assignment of enantiomorphs for the chiral allotrope β-Mn by diffraction methods

Considering influence of microstructure morphology of epoxy/glass composite on its behavior under deformation conditions—digital material representation case study

Correlative Analysis of the Dimensional Properties of Bipyramidal Titania Nanoparticles by Complementing Electron Microscopy with Other Methods

Crystallographic analysis of the lattice metric () from single electron backscatter diffraction or transmission Kikuchi diffraction patterns

Deposition of Pd nanoparticles on the walls of cathodically hydrogenated TiO2 nanotube arrays via galvanic displacement: A novel route to produce exceptionally active and durable composite electrocatalysts for cost-effective hydrogen evolution

scientific article published in 2018

Development of Auto Ejection Melt Spinning (AEMS) and its application in fabrication of cobalt-based ribbons

Dissolution of Ag Precipitates in the Cu⁻8wt.%Ag Alloy Deformed by High Pressure Torsion

scientific article published on 01 February 2019

EBSD orientation analysis based on experimental Kikuchi reference patterns

Effect of B addition on the superelasticity in FeNiCoAlTa single crystals

Effect of GA+ ion beam on the stability of retained austenite in high carbon steel

Effect of Mo on Phase Stability and Properties in FeMnNiCo High-Entropy Alloys

Effect of Yttrium Additions in Relation to Oxygen Content on Glass Formation in the Zr50Cu40Al10 Alloy

Effect of Zr Purity and Oxygen Content on the Structure and Mechanical Properties of Melt-Spun and Suction-Cast Cu46Zr42Al7Y5 Alloy

Effect of a Sulfur Precursor on the Hydrothermal Synthesis of CuMnSnS

Effect of high pressure torsion on microstructure of Cu-Sn alloys with different content of Hume Rothery phase

Effect of low and high heating rates on reaction path of Ni(V)/Al multilayer

Effect of strain rate and crystalline inclusions on mechanical properties of bulk glassy and partially crystallized Zr52.5Cu17.9Ni14.6Al10Ti5 alloy

Electric quadrupole interaction in cubic BCC α-Fe

Evaluation of pulsed laser deposited thin films properties on the basis of the nanoindentation test

Experimental and Thermodynamic Study of Selected in-Situ Composites from the Fe-Cr-Ni-Mo-C System

Experimental study of phase transformation in non-equilibrium hypoeutectic alloy from the Fe–Cr–Ni–Mo–C system

Formation of eutectic carbides in Fe–Cr–Mo–C alloy during non-equilibrium crystallization

Glass forming ability of the Zr 50 Cu 40 Al 10 alloy with two oxygen levels

Grain refinement of intermetallic compounds in the Cu–Sn system under high pressure torsion

High quality transmission Kikuchi diffraction analysis of deformed alloys - Case study

Influence of the Supersaturating Temperature on the Microstructure and Hardness of Ti24Nb4Zr8Sn Alloy

Interfacial reactions and structural properties of explosively welded titanium/copper plates

Kikuchi pattern simulations of backscattered and transmitted electrons

scientific article published in 2021

Manual measurement of angles in backscattered and transmission Kikuchi diffraction patterns

scientific article published on 25 March 2020

Mapping of local lattice parameter ratios by projective Kikuchi pattern matching

Mechanical, Structural, and Chemical Analysis of Athrombogenic Multilayer Wall of Ventricular Assist Device Tested in Hydrodynamic Fatigue Tests

Microstructural and microchemical characterization of Ni-Ta-Al-Cr-C coating layer on austenitic stainless steel AISI 310

Microstructure Evolution in Inconel 718 Produced by Powder Bed Fusion Additive Manufacturing

Microstructure and catalytic properties of rapidly solidified Al-28.5 at% Fe and Al-28.5 at% Co alloys applied for selective hydrogenation of phenylacetylene

Microstructure and properties of the interfacial region in explosively welded and post-annealed titanium-copper sheets

Microstructure of Cast Ni-Cr-Al-C Alloy

Necessary Thermodynamics Factors to Obtain Simple Solid Solutions in High-Entropy Alloys from the Al-Ti-Co-Ni-Fe System

Numerical Procedure of Three-Dimensional Reconstruction of Ferrite-Pearlite Microstructure Data from SEM/EBSD Serial Sectioning

Numerical Study on the Dependency of Microstructure Morphologies of Pulsed Laser Deposited TiN Thin Films and the Strain Heterogeneities during Mechanical Testing

Numerical modelling of a compression test based on the 3D digital material representation of pulsed laser deposited TiN thin films

Omega Phase Formation in Ti-3wt.%Nb Alloy Induced by High-Pressure Torsion

On the crystallography of the Mg–Si–Al nitride nuclei and of the graphite/nitride interface in spheroidal graphite iron

Phase transitions and mechanical behavior of Ti-3wt.%Nb alloy after high pressure torsion and low-temperature annealing

Refined Calibration Model for Improving the Orientation Precision of Electron Backscatter Diffraction Maps

scientific article published on 23 June 2020

SHS reaction of Ti/Al multilayers and resistive heating used for joining of Ti-6Al-4V alloy

Spectroscopic and positron lifetime measurements of hydrogenated single walled carbon nanohorns

scientific article published on 27 April 2016

Step-by-step texture modification through strain path change toward improvement of the hardening capacity in a twinning-induced-plasticity steel

Strain-induced martensite reversion in 18Cr–8Ni steel – transmission Kikuchi diffraction study

Stress measurements by multi-reflection grazing-incidence X-ray diffraction method (MGIXD) using different radiation wavelengths and different incident angles

Structures of Cu-Based Glass Forming System Doped with Iron

Studies on the Two-Step Aging Process of Fe-Based Shape Memory Single Crystals

scientific article published on 07 April 2020

Synthesis and Characterization of Cu2FeSnS4-Cu2MnSnS4 Solid Solution Microspheres

scientific article published on 07 October 2020

T-Shape Connector Hydroforming Process Analysis

Ternary LaNi4.75M0.25 hydrogen storage alloys: Surface segregation, hydrogen sorption and thermodynamic stability

Tetragonality mapping of martensite in a high‑carbon steel by EBSD

Texture Evolution of a Single Crystal Cu-8% at. Al Subjected to the Drawing Process

The Analysis of the Water-Expanded Rock Bolts Ruptures During Pressure Test

The Characterization Of Cast Fe-Cr-C Alloy

The Influence of Cooling Rate During Crystallization on the Effective Partitioning Coefficient in High-Entropy Alloys from Al-Ti-Co-Ni-Fe System

The Investigation of Strain-Induced Martensite Reverse Transformation in AISI 304 Austenitic Stainless Steel

The effect of heat treatment on the precipitation hardening in FeNiCoAlTa single crystals

scientific article published in May 2020

The effect of reduced temperatures on microstructure development in tensile tested high-manganese steel

The effect of temperature on the evolution of eutectic carbides and M 7 C 3 → M 23 C 6 carbides reaction in the rapidly solidified Fe-Cr-C alloy

The role of the strengthening phases on the HAZ liquation cracking in a cast Ni-based superalloy used in industrial gas turbines

The α↔ω phase transformations and thermal stability of Ti Co alloy treated by high pressure torsion

Towards a better understanding of the phase transformations in explosively welded copper to titanium sheets

Transmission Kikuchi diffraction: The impact of the signal-to-noise ratio

Unusual Solidification Behavior of the Suction-Cast Cu-Zr-Al-Y Alloy Doped with Fe

X-ray Diffraction and EBSD Study of Al-Ti-Co-Ni-Fe High-Entropy Alloy