60NiTi: A Review of Recent Research Findings, Potential for Structural and Mechanical Applications, and Areas of Continued Investigations

article published in 2017

A friction model for dry contacts during metal-forming processes

A new photopolymer extrusion 5-axis 3D printer

A static friction model for tube bulge forming using a solid bulging medium

A study on high ratio cup drawing by Maslennikov’s process

article published in 2011

Abrasive Wear of Polymer Fibers Investigated by Reciprocal Scratching in an Atomic Force Microscope

An Investigation on Microstructural and Mechanical Properties of Porous 60NiTi Parts Solutionized by Different Cost-Effective Methods

article published in 2018

Analysis of deep drawing of sheet metal using the Marform process

Analytical and computational sliding wear prediction in a novel knee implant: a case study

scientific article published on 11 January 2020

Assessment of Perturbation and Homotopy-Perturbation Methods for Solving Nonlinear Oscillator Equations

Bio-based lubricants for forming of magnesium

Characterization of friction behaviour of AZ80 and ZE10 magnesium alloys under lubricated contact condition by strip draw and bend test

Combined experimental and numerical analysis of bulge test at high strain rates using split Hopkinson pressure bar apparatus

article published in 2010

Comparison of the reciprocating sliding wear of 58Ni39Ti-3Hf alloy and baseline 60NiTi

Computer aided modelling of friction in rubber-pad forming process

Coupled thermo-mechanical creep behavior of sandwich beams – Modeling and analysis

Dry sliding frictional characteristics of ZE10 and AZ80 magnesium strips under plastic deformation

Dry sliding wear performance and behaviour of powder bed fusion processed Ti–6Al–4V alloy

Effect of Hafnium Addition in 60NiTi Alloy Hardened Under Open Atmosphere Conditions

Effect of Internal Pressure and Dent Depth on Strain Distribution of Pressurized Pipe Subjected to Indentation

Effect of Temperature on Sliding Wear Behavior of Ti-6Al-4V Alloy Processed by Powder Bed Fusion Additive Manufacturing Techniques

Effect of build direction dependent grain structure on fatigue crack growth of biomedical Co–29Cr–6Mo alloy processed by laser powder bed fusion

Effect of degradation on tribological performance of engine lubricants at elevated temperatures

Effect of process parameters on tribological performance of 316L stainless steel parts fabricated by selective laser melting

Effects of Open Atmosphere Solutionizing Treatment on the Microstructural and Mechanical Properties of Porous 60NiTi Parts

Effects of Process Parameters on Temperature and Stress Distributions During Selective Laser Melting of Ti–6Al–4V

Evaluation of carbon diffusion in heat treatment of H13 tool steel under different atmospheric conditions

Evaluation of the pull-out strength of galvanised steel strips in a cement-based material

Experimental Investigation of the Formability of Organic Coated Steel Sheet Metal

Experimental and numerical analysis pull-out strength of steel strip in foam concrete

Experimental study on friction and wear properties of interpenetrating polymer network alginate-polyacrylamide hydrogels for use in minimally-invasive joint implants

Fabrication and characterisation of poly(vinyl alcohol)/chitosan scaffolds for tissue engineering applications

Fatigue Testing of Human Flexor Tendons Using a Customized 3D-Printed Clamping System

Finite element modelling of sliding wear in three-dimensional woven textiles

Formability of Magnesium Alloys AZ80 and ZE10

Frictional Properties of AZ80 and ZE10 Magnesium Alloys Under Dry and Lubricated Contact Conditions

High Strain Rate Compressive Behaviour of Selective Laser Melted Ti-6Al-4V

High strain-rate bulge forming of sheet metals using a solid bulging medium

Influence of heat treatment techniques on hot formability of AZ61 magnesium alloy

Influence of humidity on creep response of sandwich beam with a viscoelastic soft core

Investigation of Friction and Wear Properties of Duplex-Annealed Ti–6Al–2Sn–4Zr–2Mo Against Hardened AISI E52100 at Linear Reciprocating Motion

Investigation of Polyurethane Bonding to Steel in Sandwich Panels

Mechanical and microstructural characteristics of as-sintered and solutionized porous 60NiTi

Mechanical and tribological properties of a novel hydrogel composite reinforced by three-dimensional woven textiles as a functional synthetic cartilage

Microstructural and Mechanical Properties of Porous 60NiTi Prepared by Conventional Press-and-sinter Method

Modelling of kinetic friction in V-bending of ultra-high-strength steel sheets

Numerical simulation of sheet stamping process using flexible punch

Plastic bulging of sheet metals at high strain rates

Pull-out behavior of galvanized steel strip in foam concrete

Reciprocating Sliding Wear Behavior of 60NiTi As Compared to 440C Steel under Lubricated and Unlubricated Conditions

Rubber-pad forming processes

Selective Laser Melting of Free-Assembled Stainless Steel 316L Hinges: Optimization of Volumetric Laser Energy Density and Joint Clearance

article published in 2022

Sheet metal forming with the aid of flexible punch, numerical approach and experimental validation

Synthesis of As-sintered 60NiTi Parts with a High Open Porosity Level

Tribological Characterization of Alumina Ceramic Manufactured by Solvent-Based Slurry Stereolithography

Tribological Characterization of Polyacrylamide-Alginate Hybrid Hydrogels as a Potential Candidate for Cartilage Replacement

Tribological Evaluation of Silica Nanoparticle Enhanced Bilayer Hydrogels as A Candidate for Cartilage Replacement

Tribological Performance of Duplex-Annealed Ti-6Al-2Sn-4Zr-2Mo Titanium Alloy at Elevated Temperatures Under Dry Sliding Condition

Tribological performance of selective laser melted 316L stainless steel

Use of a Novel Polymer-Coated Steel as an Alternative to Traditional Can Manufacturing in the Food Industry

Utilization of 3D printing technology to facilitate and standardize soft tissue testing

scientific article published on 27 July 2018

Wear Behaviour of N Ion Implanted Ti-6Al-4V Alloy Processed by Selective Laser Melting

Wear behaviours of PVD-TiN coating onTi-6Al-4V alloy processed by laser powder bed fusion or conventionally processed

Wear evaluation of three-dimensionally woven materials for use in a novel cartilage replacement