List of works - Volker Altstädt

A Novel DOPO-Based Diamine as Hardener and Flame Retardant for Epoxy Resin Systems

scientific article published on 16 June 2008

A Novel and Effective Synthetic Approach to 9,10-Dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) Derivatives

scientific article published on 16 July 2007

Analyzing the influence of particle size and stiffness state of the nanofiller on the mechanical properties of epoxy/clay nanocomposites using a novel shear-stiff nano-mica

Assessment of compatibilization role of nanoclay in immiscible polystyrene/ethylene-octene copolymer blends via wide-angle X-ray scattering, microstructure, rheological analyses, and mechanical properties

scientific article from 2019

Biocompatibility and Fatigue Properties of Polystyrene−Polyisobutylene−Polystyrene, an Emerging Thermoplastic Elastomeric Biomaterial

scientific article published in March 2006

Chemical Modification and Foam Processing of Polylactide (PLA)

Comparison of the Foamability of Linear and Long-Chain Branched Polypropylene-The Legend of Strain-Hardening as a Requirement for Good Foamability

scientific article published on 24 March 2020

Compatibilisation of PPE/SAN blends by triblock terpolymers: Correlation between block terpolymer composition, morphology and properties

article

Completely Miscible Polyethylene Nanocomposites

article

Controlling the phase morphology of immiscible poly(2,6- dimethyl-1,4-phenylene ether)/poly(styrene-co-acrylonitrile) blends via addition of polystyrene

Copper and Nickel Coating of Carbon Fiber for Thermally and Electrically Conductive Fiber Reinforced Composites.

scientific article published on 7 May 2019

Corrigendum: Spongy Gels by a Top-Down Approach from Polymer Fibrous Sponges

scientific article published on 01 May 2017

Development of in situ nanofibrillar poly (lactic acid)/poly (butylene terephthalate) composites: Non-isothermal crystallization and crystal morphology ⬇️

scholarly article

Effect of Curing Agent on the Compressive Behavior at Elevated Test Temperature of Carbon Fiber-Reinforced Epoxy Composites

scientific article published on 31 May 2019

Evaluation of the Zero Shear Viscosity, the D-Content and Processing Conditions as Foam Relevant Parameters for Autoclave Foaming of Standard Polylactide (PLA)

scientific article published on 18 March 2020

Expanded Polycarbonate (EPC)-A New Generation of High-Temperature Engineering Bead Foams

scientific article published on 10 October 2020

Extruded Polystyrene Foams with Enhanced Insulation and Mechanical Properties by a Benzene-Trisamide-Based Additive

scientific article published on 05 February 2019

Foamed Plastics

Impact of large aspect ratio, shear-stiff, mica-like clay on mechanical behaviour of PMMA/clay nanocomposites

Increasing time of ignition for PS-clay nanocomposites filled with [Fe(bpy)3]2+-modified hectorite

Induction of molecular organization of oligomers by low-energy electrons

scientific article published on 22 January 2010

Influence of Fiber Volume Content on Thermal Conductivity in Transverse and Fiber Direction of Carbon Fiber-Reinforced Epoxy Laminates

scientific article published on 02 April 2019

Influence of Particle Size on Toughening Mechanisms of Layered Silicates in CFRP

scientific article published on 22 May 2020

Influence of the oxidation state of phosphorus on the decomposition and fire behaviour of flame-retarded epoxy resin composites

scientific article from 2006

Investigation on the Flame Retardant Properties and Fracture Toughness of DOPO and Nano-SiO2 Modified Epoxy Novolac Resin and Evaluation of Its Combinational Effects

scientific article published on 10 May 2019

Lightweight Ultra-High Barrier Liners for Helium and Hydrogen

scientific article published on 06 May 2020

Low-Density Polybutylene Terephthalate Foams with Enhanced Compressive Strength via a Reactive-Extrusion Process

scientific article published on 04 September 2020

Melt processed blends of poly(styrene-co-acrylonitrile) and poly(phenylene ether) compatibilized with polystyrene-b-polybutadiene-b-poly(methyl methacrylate) triblock terpolymers

Morphological Studies of Poly(styrene)-block-poly(ethylene-co-butylene)-block-poly(methyl methacrylate) in the Composition Region of the “Knitting Pattern” Morphology§

article

Morphology Formation in PC/ABS Blends during Thermal Processing and the Effect of the Viscosity Ratio of Blend Partners

scientific article published on 5 August 2016

Novel Phosphorous-Containing Aromatic Polyethers - Synthesis and Characterization

scientific article from 2005

Novel Phosphorus-Containing Poly(ether sulfone)s and Their Blends with an Epoxy Resin: Thermal Decomposition and Fire Retardancy

scientific article from 2006

On the importance of specific interface area in clay nanocomposites of PMMA filled with synthetic nano-mica

scholarly article by Mazen Ziadeh et al published August 2014 in Polymer

Preparation of microcellular low-density PMMA nanocomposite foams: Influence of different fillers on the mechanical, rheological and cell morphological properties

article

Properties of Segmented Block Copolymers in PEEK/PSU Blends

Properties of Styrene-Maleic Anhydride Copolymer Compatibilized Polyamide 66/Poly (Phenylene Ether) Blends: Effect of Blend Ratio and Compatibilizer Content

scientific article published on 31 July 2020

Properties of Styrene-Maleic Anhydride Copolymer Compatibilized Polyamide 66/Poly (Phenylene Ether) Blends: Effect of Maleic Anhydride Concentration and Copolymer Content

scientific article published on 09 March 2020

Rheological Study of Gelation and Crosslinking in Chemical Modified Polyamide 12 Using a Multiwave Technique

scientific article published on 07 April 2020

Rheological rationalization of in situ nanofibrillar structure development: Tailoring of nanohybrid shish-kebab superstructures of poly (lactic acid) crystalline phase

scientific article from 2020

Rheology in the Presence of Carbon Dioxide (CO2) to Study the Melt Behavior of Chemically Modified Polylactide (PLA)

scientific article published on 13 May 2020

Special issue – Polymer foams

Spongy Gels by a Top-Down Approach from Polymer Fibrous Sponges

scientific article published on 14 February 2017

Synthesis of new dibenzo[c.e][1,2]oxaphosphorine 2-oxide containing diols based on diethanolamine

scientific article published on 19 October 2011

Tailoring Shear-Stiff, Mica-like Nanoplatelets

scientific article published on 01 February 2010

The Impact of Janus Nanoparticles on the Compatibilization of Immiscible Polymer Blends under Technologically Relevant Conditions

scientific article published on 22 September 2014

The role of multi-walled carbon nanotubes in epoxy nanocomposites and resin transfer molded glass fiber hybrid composites: Dispersion, local distribution, thermal, and fracture/mechanical properties

Toughening of immiscible PPE/SAN blends by triblock terpolymers

Towards completely miscible PMMA nanocomposites reinforced by shear-stiff, nano-mica

scientific article published on 26 March 2014

Transfer batch blending, an innovative solvent/solid assisted method for melt compounding to achieve good dispersion quality for polymer–clay-nanocomposites

Transparent PC/PMMA Blends Via Reactive Compatibilization in a Twin-Screw Extruder

scientific article published on 12 December 2019

List of works by Volker Altstädt

A Novel DOPO-Based Diamine as Hardener and Flame Retardant for Epoxy Resin Systems

A Novel and Effective Synthetic Approach to 9,10-Dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) Derivatives

Analyzing the influence of particle size and stiffness state of the nanofiller on the mechanical properties of epoxy/clay nanocomposites using a novel shear-stiff nano-mica

Assessment of compatibilization role of nanoclay in immiscible polystyrene/ethylene-octene copolymer blends via wide-angle X-ray scattering, microstructure, rheological analyses, and mechanical properties

Biocompatibility and Fatigue Properties of Polystyrene−Polyisobutylene−Polystyrene, an Emerging Thermoplastic Elastomeric Biomaterial

Chemical Modification and Foam Processing of Polylactide (PLA)

Comparison of the Foamability of Linear and Long-Chain Branched Polypropylene-The Legend of Strain-Hardening as a Requirement for Good Foamability

Compatibilisation of PPE/SAN blends by triblock terpolymers: Correlation between block terpolymer composition, morphology and properties

Completely Miscible Polyethylene Nanocomposites

Controlling the phase morphology of immiscible poly(2,6- dimethyl-1,4-phenylene ether)/poly(styrene-co-acrylonitrile) blends via addition of polystyrene

Copper and Nickel Coating of Carbon Fiber for Thermally and Electrically Conductive Fiber Reinforced Composites.

Corrigendum: Spongy Gels by a Top-Down Approach from Polymer Fibrous Sponges

Development of in situ nanofibrillar poly (lactic acid)/poly (butylene terephthalate) composites: Non-isothermal crystallization and crystal morphology ⬇️

Effect of Curing Agent on the Compressive Behavior at Elevated Test Temperature of Carbon Fiber-Reinforced Epoxy Composites

Evaluation of the Zero Shear Viscosity, the D-Content and Processing Conditions as Foam Relevant Parameters for Autoclave Foaming of Standard Polylactide (PLA)

Expanded Polycarbonate (EPC)-A New Generation of High-Temperature Engineering Bead Foams

Extruded Polystyrene Foams with Enhanced Insulation and Mechanical Properties by a Benzene-Trisamide-Based Additive

Foamed Plastics

Impact of large aspect ratio, shear-stiff, mica-like clay on mechanical behaviour of PMMA/clay nanocomposites

Increasing time of ignition for PS-clay nanocomposites filled with [Fe(bpy)3]2+-modified hectorite

Induction of molecular organization of oligomers by low-energy electrons

Influence of Fiber Volume Content on Thermal Conductivity in Transverse and Fiber Direction of Carbon Fiber-Reinforced Epoxy Laminates

Influence of Particle Size on Toughening Mechanisms of Layered Silicates in CFRP

Influence of the oxidation state of phosphorus on the decomposition and fire behaviour of flame-retarded epoxy resin composites

Investigation on the Flame Retardant Properties and Fracture Toughness of DOPO and Nano-SiO2 Modified Epoxy Novolac Resin and Evaluation of Its Combinational Effects

Lightweight Ultra-High Barrier Liners for Helium and Hydrogen

Low-Density Polybutylene Terephthalate Foams with Enhanced Compressive Strength via a Reactive-Extrusion Process

Melt processed blends of poly(styrene-co-acrylonitrile) and poly(phenylene ether) compatibilized with polystyrene-b-polybutadiene-b-poly(methyl methacrylate) triblock terpolymers

Morphological Studies of Poly(styrene)-block-poly(ethylene-co-butylene)-block-poly(methyl methacrylate) in the Composition Region of the “Knitting Pattern” Morphology§

Morphology Formation in PC/ABS Blends during Thermal Processing and the Effect of the Viscosity Ratio of Blend Partners

Novel Phosphorous-Containing Aromatic Polyethers - Synthesis and Characterization

Novel Phosphorus-Containing Poly(ether sulfone)s and Their Blends with an Epoxy Resin: Thermal Decomposition and Fire Retardancy

On the importance of specific interface area in clay nanocomposites of PMMA filled with synthetic nano-mica

Preparation of microcellular low-density PMMA nanocomposite foams: Influence of different fillers on the mechanical, rheological and cell morphological properties

Properties of Segmented Block Copolymers in PEEK/PSU Blends

Properties of Styrene-Maleic Anhydride Copolymer Compatibilized Polyamide 66/Poly (Phenylene Ether) Blends: Effect of Blend Ratio and Compatibilizer Content

Properties of Styrene-Maleic Anhydride Copolymer Compatibilized Polyamide 66/Poly (Phenylene Ether) Blends: Effect of Maleic Anhydride Concentration and Copolymer Content

Rheological Study of Gelation and Crosslinking in Chemical Modified Polyamide 12 Using a Multiwave Technique

Rheological rationalization of in situ nanofibrillar structure development: Tailoring of nanohybrid shish-kebab superstructures of poly (lactic acid) crystalline phase

Rheology in the Presence of Carbon Dioxide (CO2) to Study the Melt Behavior of Chemically Modified Polylactide (PLA)

Special issue – Polymer foams

Spongy Gels by a Top-Down Approach from Polymer Fibrous Sponges

Synthesis of new dibenzo[c.e][1,2]oxaphosphorine 2-oxide containing diols based on diethanolamine

Tailoring Shear-Stiff, Mica-like Nanoplatelets

The Impact of Janus Nanoparticles on the Compatibilization of Immiscible Polymer Blends under Technologically Relevant Conditions

The role of multi-walled carbon nanotubes in epoxy nanocomposites and resin transfer molded glass fiber hybrid composites: Dispersion, local distribution, thermal, and fracture/mechanical properties

Toughening of immiscible PPE/SAN blends by triblock terpolymers

Towards completely miscible PMMA nanocomposites reinforced by shear-stiff, nano-mica

Transfer batch blending, an innovative solvent/solid assisted method for melt compounding to achieve good dispersion quality for polymer–clay-nanocomposites

Transparent PC/PMMA Blends Via Reactive Compatibilization in a Twin-Screw Extruder

Ultralight, Soft Polymer Sponges by Self-Assembly of Short Electrospun Fibers in Colloidal Dispersions