List of works - Franz Dieter Fischer

A kinetic model of the transformation of a micropatterned amorphous precursor into a porous single crystal

scientific article published on 6 September 2009

A new treatment of transient grain growth

A possible origin of surface cracks in rails

scientific article published on 16 June 2011

A study on the principle of maximum dissipation for coupled and non-coupled non-isothermal processes in materials.

scientific article published on 9 March 2011

A theoretical model for tissue growth in confined geometries

A thermodynamic approach to grain growth and coarsening

A thermokinetic model for Mg–Si couple formation in Al–Mg–Si alloys

Atomistic Modeling-Based Design of Novel Materials

Au55, a stable glassy cluster: results of ab initio calculations

scientific article published on 25 October 2017

Bioinspired Design Criteria for Damage-Resistant Materials with Periodically Varying Microstructure

article by Otmar Kolednik et al published 3 August 2011 in Advanced Functional Materials

Computational micromechanics of multiphase materials

scientific article published in July 1992

Couples and pairs formation—thermodynamic and kinetic modelling applied to Al–Mg–Si

Crack driving force in twisted plywood structures

scientific article published on 7 April 2017

Curvature-induced excess surface energy of fullerenes: Density functional theory and Monte Carlo simulations

scholarly article in Physical Review B, vol. 81 no. 23, June 2010

Damage tolerance of lamellar bone

scientific article published on 24 October 2019

Deformation and damage of a crossing nose due to wheel passages

scientific article published in October 2008

Determination of Substitutional-Interstitial Interaction from Chemical Potentials of Interstitials in the Steel Matrix

Determination of depths of multiple traps for interstitials and their influence on diffusion kinetics

Determination of depths of traps for interstitials from thermodynamic data: a new view on carbon trapping and diffusion

Diffusion and creep in multi-component alloys with non-ideal sources and sinks for vacancies

Diffusion processes in a migrating interface: The thick-interface model

Diffusive and massive phase transformations in Ti–Al–Nb alloys – Modelling and experiments

Elastic properties of graphene obtained by computational mechanical tests

Elastic stress–strain analysis of an infinite cylindrical inclusion with eigenstrain

Energy Dissipation and Stability of Propagating Surfaces

scientific article published on 02 November 2005

Four Different Numerical Approaches of Calculating Strains and Stresses During Impact in Wheel-Rail Rolling Contact

scientific article published in January 2005

Fracture statistics of brittle materials: Weibull or normal distribution

scientific article published on 13 June 2002

Generalization of classical Hillert's grain growth and LSW theories to a wide family of kinetic evolution equations and stationary distribution functions

scientific article published in 2022

Growth limit of carbon onions – A continuum mechanical study

Improvements of strength and fracture resistance by spatial material property variations

Influence of misfit stress relaxation by power-law creep and plasticity on kinetics of coarsening of precipitates

Interstitial diffusion in systems with multiple sorts of traps

Local approach for coarsening of precipitates

Microscopic investigation of surface layers on rails

scientific article published in January 2005

Modelling of kinetics in multi-component multi-phase systems with spherical precipitates

Modelling the role of surface stress on the kinetics of tissue growth in confined geometries

scientific article published on 22 October 2012

Near surface deformation of rails and wheels in a curve and during acceleration and braking

scientific article published in February 2008

On energy changes due to the formation of a circular hole in an elastic plate

Onsager's coefficients and diffusion laws—a Monte Carlo study

Physicochemical basis for water-actuated movement and stress generation in nonliving plant tissues.

scientific article published on 5 December 2013

Plastification and Damage in Wheel-Rail Rolling Contact - Case Study on a Crossing

scientific article published in December 2005

Precipitate growth in multi-component systems with stress relaxation by diffusion and creep

Role of vacancies in work hardening and fatigue of TiAl alloys

Semi-analytical approaches to assess the crack driving force in periodically heterogeneous elastic materials

article by F. D. Fischer et al published 22 December 2011 in International Journal of Fracture

Shell-Models for Multi-Layer Carbon Nano-Particles

Stress relaxation by power-law creep during growth of a misfitting precipitate

Surface Energy of Au Nanoparticles Depending on Their Size and Shape

scientific article published on 08 March 2020

Surface energy of nanoparticles - influence of particle size and structure

scientific article published on 23 August 2018

Surface tension determines tissue shape and growth kinetics

scientific article published on 11 September 2019

Switching Mechanics with Chemistry: A Model for the Bending Stiffness of Amphiphilic Bilayers with Interacting Headgroups in Crystalline Order

scientific article published in Physical Review Letters

The Thermo-Mechanical Response to a General Loading Path of a Martensitically Transforming Steel

The influence of a brittle Cr interlayer on the deformation behavior of thin Cu films on flexible substrates: Experiment and model

scientific article published on May 2015

List of works by Franz Dieter Fischer

A kinetic model of the transformation of a micropatterned amorphous precursor into a porous single crystal

A new treatment of transient grain growth

A possible origin of surface cracks in rails

A study on the principle of maximum dissipation for coupled and non-coupled non-isothermal processes in materials.

A theoretical model for tissue growth in confined geometries

A thermodynamic approach to grain growth and coarsening

A thermokinetic model for Mg–Si couple formation in Al–Mg–Si alloys

Atomistic Modeling-Based Design of Novel Materials

Au55, a stable glassy cluster: results of ab initio calculations

Bioinspired Design Criteria for Damage-Resistant Materials with Periodically Varying Microstructure

Computational micromechanics of multiphase materials

Couples and pairs formation—thermodynamic and kinetic modelling applied to Al–Mg–Si

Crack driving force in twisted plywood structures

Curvature-induced excess surface energy of fullerenes: Density functional theory and Monte Carlo simulations

Damage tolerance of lamellar bone

Deformation and damage of a crossing nose due to wheel passages

Determination of Substitutional-Interstitial Interaction from Chemical Potentials of Interstitials in the Steel Matrix

Determination of depths of multiple traps for interstitials and their influence on diffusion kinetics

Determination of depths of traps for interstitials from thermodynamic data: a new view on carbon trapping and diffusion

Diffusion and creep in multi-component alloys with non-ideal sources and sinks for vacancies

Diffusion processes in a migrating interface: The thick-interface model

Diffusive and massive phase transformations in Ti–Al–Nb alloys – Modelling and experiments

Elastic properties of graphene obtained by computational mechanical tests

Elastic stress–strain analysis of an infinite cylindrical inclusion with eigenstrain

Energy Dissipation and Stability of Propagating Surfaces

Four Different Numerical Approaches of Calculating Strains and Stresses During Impact in Wheel-Rail Rolling Contact

Fracture statistics of brittle materials: Weibull or normal distribution

Generalization of classical Hillert's grain growth and LSW theories to a wide family of kinetic evolution equations and stationary distribution functions

Growth limit of carbon onions – A continuum mechanical study

Improvements of strength and fracture resistance by spatial material property variations

Influence of misfit stress relaxation by power-law creep and plasticity on kinetics of coarsening of precipitates

Interstitial diffusion in systems with multiple sorts of traps

Local approach for coarsening of precipitates

Microscopic investigation of surface layers on rails

Modelling of kinetics in multi-component multi-phase systems with spherical precipitates

Modelling of kinetics in multi-component multi-phase systems with spherical precipitates

Modelling the role of surface stress on the kinetics of tissue growth in confined geometries

Near surface deformation of rails and wheels in a curve and during acceleration and braking

On energy changes due to the formation of a circular hole in an elastic plate

Onsager's coefficients and diffusion laws—a Monte Carlo study

Physicochemical basis for water-actuated movement and stress generation in nonliving plant tissues.

Plastification and Damage in Wheel-Rail Rolling Contact - Case Study on a Crossing

Precipitate growth in multi-component systems with stress relaxation by diffusion and creep

Role of vacancies in work hardening and fatigue of TiAl alloys

Semi-analytical approaches to assess the crack driving force in periodically heterogeneous elastic materials

Shell-Models for Multi-Layer Carbon Nano-Particles

Stress relaxation by power-law creep during growth of a misfitting precipitate

Surface Energy of Au Nanoparticles Depending on Their Size and Shape

Surface energy of nanoparticles - influence of particle size and structure

Surface tension determines tissue shape and growth kinetics

Switching Mechanics with Chemistry: A Model for the Bending Stiffness of Amphiphilic Bilayers with Interacting Headgroups in Crystalline Order

The Thermo-Mechanical Response to a General Loading Path of a Martensitically Transforming Steel

The influence of a brittle Cr interlayer on the deformation behavior of thin Cu films on flexible substrates: Experiment and model

Thermodynamic modeling of a phase transformation in protein filaments with mechanical function

Thermodynamic modelling of irreversible processes

Weight Function, J-Integral and Material Forces Approach to Ceramic Multilayers