Search filters

List of works by Mutlu Özcan

A 10-Year Follow-Up of Different Intra-Radicular Retainers in Teeth Restored with Zirconia Crowns

scientific article published on 27 December 2019

A Clinical Study Assessing the Influence of Anodized Titanium and Zirconium Dioxide Abutments and Peri-implant Soft Tissue Thickness on the Optical Outcome of Implant-Supported Lithium Disilicate Single Crowns

scientific article published on January 2017

A Review of the Applications of Additive Manufacturing Technologies Used to Fabricate Metals in Implant Dentistry

scientific article published on 16 June 2020

A Survey on Prevalence, Causes and Prevention of Postcementation Hypersensitivity

scientific article published in September 2016

A Technical Report on Repair of Amalgam-dentin Complex ⬇️

scientific article published on August 11, 2011

A clinical protocol for intraoral digital impression of screw-retained CAD/CAM framework on multiple implants based on wavefront sampling technology.

scientific article

A comparative study between cone-beam computed tomography and periapical radiographs in the diagnosis of simulated endodontic complications

scientific article published on October 11, 2010

A digital cast-free clinical workflow for oral rehabilitation with removable partial dentures: A dental technique

scientific article published on 02 August 2019

A microstrain comparison of passively fitting screw-retained and cemented titanium frameworks

scientific article published on 3 May 2014

A preliminary report on short-term clinical outcomes of three-unit resin-bonded fixed prostheses using two adhesive cements and surface conditioning combinations.

scientific article

A report on a diagnostic digital workflow for esthetic dental rehabilitation using additive manufacturing technologies

scientific article published in January 2018

A review on chemical composition, mechanical properties, and manufacturing work flow of additively manufactured current polymers for interim dental restorations

article

A strain gauge analysis comparing 4-unit veneered zirconium dioxide implant-borne fixed dental prosthesis on engaging and non-engaging abutments before and after torque application.

scientific article published on 15 February 2018

A study on stress distribution to cement layer and root dentin for post and cores made of CAD/CAM materials with different elasticity modulus in the absence of ferrule

scientific article published on 01 January 2019

Accuracy of a Digital Impression System Based on Active Triangulation Technology With Blue Light for Implants: Effect of Clinically Relevant Parameters.

scientific article published on 4 June 2015

Accuracy of a digital impression system based on active wavefront sampling technology for implants considering operator experience, implant angulation, and depth.

scientific article published on 24 July 2013

Accuracy of a digital impression system based on parallel confocal laser technology for implants with consideration of operator experience and implant angulation and depth.

scientific article

Accuracy of definitive casts using 4 implant-level impression techniques in a scenario of multi-implant system with different implant angulations and subgingival alignment levels.

scientific article published in June 2013

Accuracy of two digital implant impression systems based on confocal microscopy with variations in customized software and clinical parameters.

scientific article published on January 2015

Additive Manufacturing Technologies Used for Processing Polymers: Current Status and Potential Application in Prosthetic Dentistry

scientific article published on 22 April 2018

Additive manufacturing technologies for processing zirconia in dental applications

scientific article published on 01 January 2020

Adhesion Protocol for Bonding Abutments or Fixed Dental Prostheses on Titanium Bases in Implant-borne Reconstructions: How and Why?

scientific article published in January 2016

Adhesion behavior of conventional and high-translucent zirconia: Effect of surface conditioning methods and aging using an experimental methodology

scientific article published on 17 May 2019

Adhesion of Resin Composite to Hydrofluoric Acid-exposed Enamel and Dentin in Repair Protocols ⬇️

scientific article published on August 22, 2011

Adhesion of conventional and simplified resin-based luting cements to superficial and deep dentin ⬇️

scientific article published on July 21, 2011

Adhesion potential of relining materials to polyamide and PMMA-based denture base materials: effect of surface conditioning methods

scholarly article

Adhesive quality of self-adhesive and conventional adhesive resin cement to Y-TZP ceramic before and after aging conditions

scientific article published on November 2010

Airborne particle abrasion of zirconia fixed dental prostheses.

scientific article published on 27 October 2014

Air–particle abrasion on zirconia ceramic using different protocols: Effects on biaxial flexural strength after cyclic loading, phase transformation and surface topography

scientific article published on 17 May 2013

An In Vitro Study of Factors Influencing the Performance of Digital Intraoral Impressions Operating on Active Wavefront Sampling Technology with Multiple Implants in the Edentulous Maxilla

scientific article

An introduction to silanes and their clinical applications in dentistry

scientific article published on March 2004

An investigation of atomic force microscopy, surface topography and adhesion of luting cements to zirconia: effect of silica coating, zirconia primer and laser

scholarly article

An update on applications of 3D printing technologies used for processing polymers used in implant dentistry

scientific article published on 01 July 2019

Analysis of Surface Roughness, Fracture Toughness, and Weibull Characteristics of Different Framework-Veneer Dental Ceramic Assemblies after Grinding, Polishing, and Glazing

scientific article published on 16 November 2017

Analysis of tooth enamel after excessive bleaching: a study using scanning electron microscopy and energy dispersive x-ray spectroscopy

scientific article published on 01 January 2010

Assessment of color parameters of composite resin shade guides using digital imaging versus colorimeter.

scientific article

Association between Oral Mucosal Lesions and Hygiene Habits in a Population of Removable Prosthesis Wearers.

scientific article published on 17 September 2014

Bond Strength Comparison of Amalgam Repair Protocols Using Resin Composite in Situations With and Without Dentin Exposure ⬇️

scientific article published on November 1, 2010

Bond Strengths of One-Step Self-Etch Adhesives to Laser-Irradiated and Bur-Cut Dentin After Water Storage and Thermocycling ⬇️

scientific article published on March 15, 2012

Bond strength and stability of 3 luting systems on a zirconia-dentin complex.

scientific article

Bond strength durability of a resin composite on a reinforced ceramic using various repair systems

scientific article published on 9 August 2009

Bond strength durability of direct and indirect composite systems following surface conditioning for repair

scientific article published on 01 October 2007

Bond strength of a resin cement to high-alumina and zirconia-reinforced ceramics: the effect of surface conditioning

scientific article published on 01 June 2006

Bond strength of acrylic teeth to denture base resin after various surface conditioning methods before and after thermocycling.

scientific article published in March 2007

Bond strength of two resin cements on dentin using different cementation strategies.

scientific article published in August 2010

Bond strength of two resin cements to titanium after different surface conditioning methods

scientific article published on 01 January 2012

Bonding of glass ceramic and indirect composite to non-aged and aged resin composite

scientific article published on 01 February 2012

Bonding polycarbonate brackets to ceramic: effects of substrate treatment on bond strength

scientific article published on 01 August 2004

Can Cleansing Regimens Effectively Eliminate Saliva Contamination from Lithium Disilicate Ceramic Surface?

scientific article published in March 2017

Can application of universal primers alone be a substitute for airborne-particle abrasion to improve adhesion of resin cement to zirconia?

scientific article published on April 2015

Can heat treatment procedures of pre-hydrolyzed silane replace hydrofluoric acid in the adhesion of resin cement to feldspathic ceramic?

scientific article published in December 2013

Can the Application of Multi-Mode Adhesive be a Substitute to Silicatized/Silanized Y-TZP Ceramics?

scientific article published on 01 May 2018

Can the type of preheated resin composite influence the microtensile bond strength of ceramic restoration to human dentin?

scientific article published on 20 September 2021

Chemical Composition, Knoop Hardness, Surface Roughness, and Adhesion Aspects of Additively Manufactured Dental Interim Materials

scientific article published on 08 December 2020

Chemical composition, surface roughness, and ceramic bond strength of additively manufactured cobalt-chromium dental alloys

scientific article published on 25 May 2020

Chipping of veneering ceramic on a lithium disilicate anterior single crown: Description of repair method and a fractographic failure analysis

scientific article published on 25 March 2019

Clinical Study of the Influence of Ambient Light Scanning Conditions on the Accuracy (Trueness and Precision) of an Intraoral Scanner

scientific article published on 30 December 2019

Clinical Study of the Influence of Ambient Lighting Conditions on the Mesh Quality of an Intraoral Scanner

scientific article published on 28 May 2020

Color dimensions of additive manufactured interim restorative dental material

scientific article published on 22 October 2019

Comparison of Adhesion of a Novel Pre-sintered Cobalt-Chromium to Pre-sintered Zirconia and Cast Nickel-Chromium

scientific article published on 01 July 2018

Comparison of alternative adhesive cementation concepts for zirconia ceramic: glaze layer vs zirconia primer

scientific article published on 01 February 2012

Comparison of conventional, photogrammetry, and intraoral scanning accuracy of complete-arch implant impression procedures evaluated with a coordinate measuring machine

scientific article published on 06 May 2020

Comparison of methanol/hydrochloric, ferric chloride acid versus tribochemical silica coating for adhesion of resin cement to zirconium dioxide

Comparison of resin cement adhesion to Y-TZP ceramic following manufacturers' instructions of the cements only

scientific article published on 26 September 2007

Comparison of two bond strength testing methodologies for bilayered all-ceramics.

scientific article published on 17 July 2006

Conversion degree of indirect resin composites and effect of thermocycling on their physical properties

scientific article published on 21 December 2009

Correction To: Evaluation of mechanical and adhesion properties of glass ionomer cement incorporating nano-sized hydroxyapatite particles

scientific article published on 01 January 2020

Could digital imaging be an alternative for digital colorimeters?

scientific article

Digital tools and 3D printing technologies integrated into the workflow of restorative treatment: A clinical report

scientific article published on 07 August 2018

Digital workflow for an esthetic rehabilitation using a facial and intraoral scanner and an additive manufactured silicone index: A dental technique

scientific article published on 26 July 2019

Discoloration of manually fabricated resins and industrially fabricated CAD/CAM blocks versus glass-ceramic: effect of storage media, duration, and subsequent polishing

scientific article published on 14 May 2012

Discrepancy at the implant abutment-prosthesis interface of complete-arch cobalt-chromium implant frameworks fabricated by additive and subtractive technologies before and after ceramic veneering

scientific article published on 24 May 2020

Discrepancy of complete-arch titanium frameworks manufactured using selective laser melting and electron beam melting additive manufacturing technologies

scientific article published on 10 July 2018

Does adhesive resin application contribute to resin bond durability on etched and silanized feldspathic ceramic?

scientific article

Does cad software affect the marginal and internal fit of milled full ceramic crowns?

scientific article published on 16 March 2022

Does rinsing following particle deposition methods have a negative effect on adhesion to titanium?

scientific article

Does the thickness of the resin cement affect the bond strength of a fiber post to the root dentin?

scientific article

Does the ultrasonic cleaning medium affect the adhesion of resin cement to feldspathic ceramic?

scientific article published on 01 December 2012

Durability and Weibull Characteristics of Lithium Disilicate Crowns Bonded on Abutments with Knife-Edge and Large Chamfer Finish Lines after Cyclic Loading

scientific article published on 15 October 2014

Durability of adhesion between feldspathic ceramic and resin cements: effect of adhesive resin, polymerization mode of resin cement, and aging.

scientific article published on 4 January 2013

Early bond strength of two resin cements to Y-TZP ceramic using MPS or MPS/4-META silanes.

scientific article published on 27 January 2011

Effect of Aging on Stained Monolithic Resin-Ceramic CAD/CAM Materials: Quantitative and Qualitative Analysis of Surface Roughness

scientific article published on 12 July 2018

Effect of Different Adhesion Strategies on Bond Strength of Resin Composite to Composite-dentin Complex ⬇️

scientific article published on July 19, 2012

Effect of Jig Design and Assessment of Stress Distribution in Testing Metal-Ceramic Adhesion.

scientific article published on 5 October 2015

Effect of Veneering Methods on Zirconia Framework-Veneer Ceramic Adhesion and Fracture Resistance of Single Crowns

scientific article published on 15 October 2014

Effect of aging conditions on the repair bond strength of a microhybrid and a nanohybrid resin composite

scientific article published in December 2010

Effect of air-abrasion regimens and fine diamond bur grinding on flexural strength, Weibull modulus and phase transformation of zirconium dioxide.

scientific article published on 18 September 2015

Effect of air-particle abrasion protocols on the biaxial flexural strength, surface characteristics and phase transformation of zirconia after cyclic loading

scientific article published on 29 January 2013

Effect of colouring green stage zirconia on the adhesion of veneering ceramics with different thermal expansion coefficients

scientific article published on 25 October 2013

Effect of conditioning methods on the microtensile bond strength of phosphate monomer-based cement on zirconia ceramic in dry and aged conditions

scientific article published on 01 April 2008

Effect of different CAD-CAM materials on the marginal and internal adaptation of endocrown restorations: An in vitro study

scientific article published on 23 April 2019

Effect of different air-abrasion protocols on topography, surface wettability and adhesion of MDP monomer-based resin cement to zirconia

scholarly article

Effect of different bonding protocols on degree of monomer conversion and bond strength between orthodontic brackets and enamel

scientific article published on 11 June 2018

Effect of different cleaning regimens on the adhesion of resin to saliva-contaminated ceramics.

scientific article

Effect of different loading pistons on stress distribution of a CAD/CAM silica-based ceramic: CAD-FEA modeling and fatigue survival analysis

scientific article published on 15 March 2019

Effect of different polymerization devices on the degree of conversion and the physical properties of an indirect resin composite

scientific article published in January 2010

Effect of different surface treatments and multimode adhesive application on the Weibull characteristics, wettability, surface topography and adhesion to CAD/CAM lithium disilicate ceramic

scientific article published on 27 November 2020

Effect of drying time of 3-methacryloxypropyltrimethoxysilane on the shear bond strength of a composite resin to silica-coated base/noble alloys

scientific article

Effect of fluorescent and nonfluorescent glaze pastes on lithium disilicate pressed ceramic color at different thicknesses

scientific article published on 19 July 2020

Effect of glazing application side and mechanical cycling on the biaxial flexural strength and Weibull characteristics of a Y-TZP ceramic

scientific article published on 28 September 2020

Effect of length of LOCATOR abutment and cement type on retention to intraradicular dentin in overdentures

scientific article published on 17 July 2019

Effect of mechanical cycling on the flexural strength of densely sintered ceramics

scientific article published on 24 April 2006

Effect of physicochemical aging conditions on the composite-composite repair bond strength

scientific article published on 01 August 2007

Effect of polishing instruments and polishing regimens on surface topography and phase transformation of monolithic zirconia: An evaluation with XPS and XRD analysis

scientific article

Effect of primer-cement systems with different functional phosphate monomers on the adhesion of zirconia to dentin

scientific article published on 07 August 2018

Effect of resin cement type on the microtensile bond strength to lithium disilicate ceramic and dentin using different test assemblies

scientific article

Effect of seating forces on cement-ceramic adhesion in microtensile bond tests

scientific article published on 13 January 2012

Effect of silica coating combined to a MDP-based primer on the resin bond to Y-TZP ceramic.

scientific article published on October 2010

Effect of silica coating on flexural strength of fiber posts

scientific article published in January 2006

Effect of static and cyclic loading on ceramic laminate veneers adhered to teeth with and without aged composite restorations

scientific article published on December 1, 2011

Effect of surface conditioning methods on the bond strength of luting cement to ceramics ⬇️

scientific article published on 01 December 2003

Effect of surface conditioning methods on the microtensile bond strength of resin composite to composite after aging conditions

scientific article published on 15 December 2006

Effect of surface conditioning modalities on the repair bond strength of resin composite to the zirconia core / veneering ceramic complex

scientific article

Effect of surface conditioning with airborne-particle abrasion on the tensile strength of polymeric CAD/CAM crowns luted with self-adhesive and conventional resin cements

scientific article published in February 2012

Effect of surface finishing and polishing procedures on color properties and translucency of monolithic zirconia restorations at varying thickness

scientific article published on 14 November 2020

Effect of surface modification on the bond strength between zirconia and resin cement

scientific article published on 01 April 2013

Effect of temporary cement removal methods from human dentin on zirconia-dentin adhesion

scholarly article

Effect of testing methods on the bond strength of resin to zirconia-alumina ceramic: microtensile versus shear test

scientific article published on 01 November 2008

Effect of the cross-linking silane concentration in a novel silane system on bonding resin-composite cement

scientific article published in August 2008

Effect of various surface conditioning methods on the adhesion of dual-cure resin cement with MDP functional monomer to zirconia after thermal aging.

scientific article

Effect of various veneering techniques on mechanical strength of computer-controlled zirconia framework designs.

scientific article published on 13 January 2014

Effects of Different Surface Conditioning Methods on the Bond Strength of Composite Resin to Amalgam ⬇️

scientific article published on May 1, 2011

Effects of air-abrasion pressure on the resin bond strength to zirconia: a combined cyclic loading and thermocycling aging study.

scientific article published on 05 June 2017

Evaluation of Different Thickness, Die Color, and Resin Cement Shade for Veneers of Multilayered CAD/CAM Blocks

scientific article

Evaluation of bond strength of various margin ceramics to a zirconia ceramic

scientific article published on 11 July 2008

Evaluation of chlorhexidine gluconate mouthrinse-induced staining using a digital colorimeter: an in vivo study

scientific article published on March 1, 2011

Evaluation of flexural strength of hipped and presintered zirconia using different estimation methods of Weibull statistics

scientific article published on 6 February 2012

Evaluation of interface characterization and adhesion of glass ceramics to commercially pure titanium and gold alloy after thermal- and mechanical-loading

scientific article

Evaluation of mechanical and adhesion properties of glass ionomer cement incorporating nano-sized hydroxyapatite particles

scientific article published on 26 April 2019

Evaluation of resin adhesion to zirconia ceramic using some organosilanes

scientific article published on 18 January 2006

Evaluation of the Adaptation and Fracture Resistance of Three CAD-CAM Resin Ceramics: An In vitro Study

scientific article published on 01 May 2019

Fiber-Reinforced Composites for Dental Applications

scientific article published on 01 November 2018

Fiber-matrix integrity, micromorphology and flexural strength of glass fiber posts: Evaluation of the impact of rotary instruments.

scientific article published on 17 April 2015

Fiber-reinforced composites in fixed prosthodontics-Quo vadis?

scientific article published on 25 May 2017

Flexural strength and Weibull characteristics of stereolithography additive manufactured versus milled zirconia

scientific article published on 17 May 2020

Fracture Strength and Failure Mode of Maxillary Implant‐Supported Provisional Single Crowns: A Comparison of Composite Resin Crowns Fabricated Directly Over PEEK Abutments and Solid Titanium Abutments ⬇️

scientific article published on December 22, 2010

Fracture Strength, Failure Types, and Weibull Characteristics of Three-Unit Zirconia Fixed Dental Prostheses After Cyclic Loading: Effects of Veneering and Air-Abrasion Protocols

scientific article published on November 2016

Fracture load and failure analysis of zirconia single crowns veneered withpressed and layered ceramics after chewing simulation

scientific article published on 21 July 2011

Fracture load of CAD/CAM-fabricated and 3D-printed composite crowns as a function of material thickness

scientific article published on 27 October 2018

Fracture of Zirconia Abutment with Metallic Insertion on Anterior Single Titanium Implant with Internal Hexagon: Retrieval Analysis of a Failure.

scientific article published in September 2016

Fracture resistance and failure modes of endocrowns manufactured with different CAD/CAM materials under axial and lateral loading

scientific article published on 08 May 2019

Fracture resistance of crowns cemented on titanium and zirconia implant abutments: a comparison of monolithic versus manually veneered all-ceramic systems

scientific article published on 01 November 2012

Fracture resistance of direct inlay-retained adhesive bridges: Effect of pontic material and occlusal morphology ⬇️

scientific article published on 01 January 2012

Fracture resistance, failure mode and stress concentration in a modified endocrown design

scientific article published on 07 August 2020

Fracture strength of implant abutments after fatigue testing: A systematic review and a meta-analysis

scientific article published on 14 May 2016

Fracture strength of zirconia implant abutments on narrow diameter implants with internal and external implant abutment connections: A study on the titanium resin base concept.

scientific article published on 11 March 2018

Gender difference in prevalence of signs and symptoms of temporomandibular joint disorders: a retrospective study on 243 consecutive patients

scientific article

General health, dental status and perceived dental treatment needs of an elderly population in Istanbul ⬇️

scientific article published on March 1, 2011

Heat treatment of pre-hydrolyzed silane increases adhesion of phosphate monomer-based resin cement to glass ceramic

scientific article published on January 2015

How to repair ceramic chipping or fracture in metal-ceramic fixed dental prostheses intraorally: step-by-step procedures

scientific article published on 01 October 2014

Impact of Gluma Desensitizer on the tensile strength of zirconia crowns bonded to dentin: an in vitro study

scientific article published on 19 February 2011

Impact of air-abrasion on fracture load and failure type of veneered anterior Y-TZP crowns before and after chewing simulation

scientific article

Impact of surface finishes on the flexural strength and fracture toughness of In-Ceram Zirconia

scientific article published on 01 March 2012

Impact of the ambient light illuminance conditions on the shade matching capabilities of an intraoral scanner

scientific article published on 21 September 2020

Implant Prosthodontic Discrepancy of Complete-Arch Co-Cr Implant Frameworks Manufactured Through Selective Laser Melting Additive Manufacturing Technology Using a Coordinate Measuring Machine

scientific article published on 19 February 2019

Implant-abutment gap versus microbial colonization: Clinical significance based on a literature review

scientific article published on 10 May 2013

Impression technique for a complete-arch prosthesis with multiple implants using additive manufacturing technologies

scientific article published on 23 November 2016

In-vitro orthodontic bond strength testing: a systematic review and meta-analysis

scientific article published on May 2010

Influence of Acid Etching and Universal Adhesives on the Bond Strength to Dentin

scientific article published on 01 June 2020

Influence of ZrO2 Addition on Structural and Biological Activity of Phosphate Glasses for Bone Regeneration

scientific article published on 12 September 2020

Influence of air-particle deposition protocols on the surface topography and adhesion of resin cement to zirconia

scientific article published on 31 October 2013

Influence of cervical finish line type on the marginal adaptation of zirconia ceramic crowns.

scientific article published in September 2009

Influence of different maintenance times of torque application on the removal torque values to loosen the prosthetic abutment screws of external hexagon implants

scientific article

Influence of fluoride- or triclosan-based desensitizing agents on adhesion of resin cements to dentin

scientific article

Influence of printing angulation on the surface roughness of additive manufactured clear silicone indices: An in vitro study

scientific article published on 22 April 2020

Influence of scan body design and digital implant analogs on implant replica position in additively manufactured casts

scientific article published on 28 November 2019

Influence of scan body design on accuracy of the implant position as transferred to a virtual definitive implant cast

scientific article published on 31 May 2020

Influence of silane heat treatment on bond strength of resin cement to a feldspathic ceramic ⬇️

scientific article published on May 20, 2011

Influence of thermal and mechanical cycling on the flexural strength of ceramics with titanium or gold alloy frameworks.

scientific article published on 3 August 2007

Influence of various surface-conditioning methods on the bond strength of metal brackets to ceramic surfaces ⬇️

scientific article published on 01 May 2003

Interfacial Properties and Bottom/Top Hardness Ratio Produced by Bulk Fill Composites in Dentin Cavities

scientific article published on 07 October 2019

Interfacial shear bond strength between different base metal alloys and five low fusing feldspathic ceramic systems ⬇️

scientific article published on May 14, 2012

Intraoral digital scans-Part 1: Influence of ambient scanning light conditions on the accuracy (trueness and precision) of different intraoral scanners

scientific article published on 18 December 2019

Intraoral digital scans: Part 2-influence of ambient scanning light conditions on the mesh quality of different intraoral scanners

scientific article published on 20 December 2019

Intraoral repair protocol for chipping or fracture of veneering ceramic in zirconia fixed dental prostheses.

scientific article published in April 2015

Laboratory and clinical considerations on prosthetic zirconia infrastructures for implants.

scientific article published in December 2013

Load-bearing capacities of ultra-thin occlusal veneers bonded to dentin

scientific article published on 13 April 2019

Load-bearing capacity and failure types of anterior zirconia crowns veneered with overpressing and layering techniques

scientific article published on 05 August 2011

Load-bearing capacity of CAD/CAM milled polymeric three-unit fixed dental prostheses: effect of aging regimens

scientific article

Load-bearing capacity of indirect inlay-retained fixed dental prostheses made of particulate filler composite alone or reinforced with E-glass fibers impregnated with various monomers ⬇️

scientific article published on 03 March 2012

Loss of surface enamel after bracket debonding: an in-vivo and ex-vivo evaluation.

scientific article

Luting cements for dental applications

Marginal and internal discrepancies related to margin design of ceramic crowns fabricated by a CAD/CAM system

scientific article

Marginal and internal fit of pre-sintered Co-Cr and zirconia 3-unit fixed dental prostheses as measured using microcomputed tomography

scientific article published on 30 April 2018

Marginal discrepancy of monolithic and veneered all-ceramic crowns on titanium and zirconia implant abutments before and after adhesive cementation: a scanning electron microscopy analysis

scientific article published in March 2013

Marginal gap, cement thickness, and microleakage of 2 zirconia crown systems luted with glass ionomer and MDP-based cements

scientific article

Mechanical and Thermal Stress Analysis of Cervical Resin Composite Restorations Containing Different Ratios of Zinc Oxide Nanoparticles: A 3D Finite Element Study

scientific article published in 2022

Mechanical and thermal cycling effects on the flexural strength of glass ceramics fused to titanium

scientific article published on 01 January 2008

Metal additive manufacturing technologies: literature review of current status and prosthodontic applications

scientific article published on 01 January 2019

Micro-morphological changes prior to adhesive bonding: high-alumina and glassy-matrix ceramics.

scientific article published in April 2008

Microhardness of dual-polymerized resin cement around a translucent fiber post in the intraradicular environment.

scientific article

Microporosities in 3D-Printed Tricalcium-Phosphate-Based Bone Substitutes Enhance Osteoconduction and Affect Osteoclastic Resorption

scientific article published on 04 December 2020

Microshear bond strength and finite element analysis of resin composite adhesion to press-on-metal ceramic for repair actions after various conditioning methods

scientific article published in February 2014

Microtensile bond strength of a resin cement to feldpathic ceramic after different etching and silanization regimens in dry and aged conditions

scientific article published on 26 December 2006

Microtensile bond strength of a resin cement to glass infiltrated zirconia-reinforced ceramic: the effect of surface conditioning.

scientific article published on 21 July 2005

Microtensile bond strength of a resin cement to silica-coated and silanized In-Ceram Zirconia before and after aging

scientific article published on 01 January 2007

Monoclinic phase transformation and mechanical durability of zirconia ceramic after fatigue and autoclave aging

scientific article published on 17 June 2016

Opaque layer firing temperature and aging effect on the flexural strength of ceramic fused to cobalt-chromium alloy.

scientific article published on 28 April 2010

Peel strength of denture liner to PMMA and polyamide: laser versus air-abrasion.

scientific article

Peri-implant tissue management after immediate implant placement using a customized healing abutment

scientific article published on 03 July 2019

Periodontal phenotype: A review of historical and current classifications evaluating different methods and characteristics

scientific article published on 21 September 2020

Physiochemical properties of a bioceramic-based root canal sealer reinforced with multi-walled carbon nanotubes, titanium carbide and boron nitride biomaterials

scientific article published on 05 June 2020

Pilot study of unidirectional E-glass fibre-reinforced composite resin splints: Up to 4.5-year clinical follow-up ⬇️

scientific article published on 06 October 2011

Position Accuracy of Implant Analogs on 3D Printed Polymer versus Conventional Dental Stone Casts Measured Using a Coordinate Measuring Machine.

scientific article published on 17 November 2017

Possible hazardous effects of hydrofluoric acid and recommendations for treatment approach: a review

scientific article

Prospective clinical study of zirconia-based posterior four-unit fixed dental prostheses: four-year follow-up.

scientific article

Prosthodontic considerations in the implant-supported all-ceramic restoration of congenitally missing maxillary lateral incisor: a clinical report

scientific article published on 7 October 2013

Publish or perish, publish and perish

scientific article published on 01 April 2014

Radioactive Potential of Zirconium-dioxide Used for Dental Applications ⬇️

scientific article published on June 12, 2014

Radiographic and Clinical Findings of Single-Visit Root Canal Treatments with Apical Enlargement in Necrotic Teeth: A Retrospective Cohort Study

scientific article published on 28 September 2020

Radiopacity of different shades of resin-based restorative materials compared to human and bovine teeth

scientific article published on July 1, 2012

Randomized controlled clinical trial of digital and conventional workflows for the fabrication of zirconia-ceramic fixed partial dentures. Part III: Marginal and internal fit

scientific article published on 03 November 2018

Randomized controlled split-mouth clinical trial of direct laminate veneers with two micro-hybrid resin composites ⬇️

scientific article published on 02 June 2012

Randomized controlled within-subject evaluation of digital and conventional workflows for the fabrication of lithium disilicate single crowns. Part III: marginal and internal fit.

scientific article published on 24 September 2016

Repair Bond Strength of a CAD/CAM Nanoceramic Resin and Direct Composite Resin: Effect of Aging and Surface Conditioning Methods

scientific article published on 01 January 2020

Repair Protocol for Amalgam Fillings with and Without Cusp Fracture: How and Why?

scientific article published in January 2016

Repair bond strength of a resin composite to alumina-reinforced feldspathic ceramic

scientific article

Repair bond strength of microhybrid, nanohybrid and nanofilled resin composites: effect of substrate resin type, surface conditioning and ageing

scientific article

Repair of silorane composite--using the same substrate or a methacrylate-based composite?

scientific article

Resin bonding to a feldspar ceramic after different ceramic surface conditioning methods: evaluation of contact angle, surface pH, and microtensile bond strength durability.

scientific article published in December 2011

Restoration Strategies of Endodontically Treated Teeth among Dental Practitioners in Saudi Arabia. A Nationwide Pilot Survey

scientific article

Short communication: Influence of restorative material and cement on the stress distribution of posterior resin-bonded fixed dental prostheses: 3D finite element analysis

scientific article published on 03 May 2019

Short communication: Influence of retainer configuration and loading direction on the stress distribution of lithium disilicate resin-bonded fixed dental prostheses: 3D finite element analysis

scientific article published on 05 August 2019

Silica-based nano-coating on zirconia surfaces using reactive magnetron sputtering: effect on chemical adhesion of resin cements

scientific article published on 01 April 2013

Silicone Additive Manufactured Indices Performed from a Virtual Diagnostic Waxing for Direct Composite Diastema Closure Combined with Resin Infiltration Technique on White Spot Lesions: A Case Report

scientific article published on 11 September 2019

Strain gauge analysis of the effect of porcelain firing simulation on the prosthetic misfit of implant-supported frameworks.

scientific article

Surface Conditioning and Bonding Protocol for Nanocomposite Indirect Restorations: How and Why?

scientific article published on 01 January 2016

Surface Conditioning and Bonding Protocol for Polymer-infiltrated Ceramic: How and Why?

scientific article published on 01 January 2016

Surface characterization of feldspathic ceramic using ATR FT-IR and ellipsometry after various silanization protocols

scientific article

Surface conditioning protocol for the chairside repair of polymeric denture teeth

scientific article published on 01 February 2015

Surface degradation of glass ceramics after exposure to acidulated phosphate fluoride

scientific article published on March 2010

Tensile Strength and Failure Types of Direct and Indirect Resin Composite Copings for Perio-Overdentures Luted Using Different Adhesive Cementation Modalities

scientific article published on 10 August 2020

The Effect of Water or Wax-based Binders on the Chemical and Morphological Characteristics of the Margin Ceramic-Framework Interface

scientific article published in September 2015

The effect of a 3-methacryloxypropyltrimethoxysilane and vinyltriisopropoxysilane blend and tris(3-trimethoxysilylpropyl)isocyanurate on the shear bond strength of composite resin to titanium metal

scientific article published in November 2004

The effect of ceramic thickness on opalescence

scientific article published on 09 September 2020

The effect of glazing on the biaxial flexural strength of different zirconia core materials

scientific article published on January 1, 2011

The effect of scanning the palate and scan body position on the accuracy of complete-arch implant scans

scientific article published on 25 July 2019

The effect of zirconia sintering temperature on flexural strength, grain size, and contrast ratio

scientific article

The efficacy of two prototype chewing gums for the removal of extrinsic tooth stain ⬇️

scientific article published on 01 April 2003

The fracture load and failure types of veneered anterior zirconia crowns: an analysis of normal and Weibull distribution of complete and censored data

scientific article

The impact of in vitro aging on the mechanical and optical properties of indirect veneering composite resins

scientific article published in December 2011

The influence of cervical finish line, internal relief, and cement type on the cervical adaptation of metal crowns.

scientific article

The influence of grain size on low-temperature degradation of dental zirconia

scientific article published on 25 November 2011

Treatment of surface contamination of lithium disilicate ceramic before adhesive luting

scientific article published on 01 February 2020

Two-body wear of monolithic, veneered and glazed zirconia and their corresponding enamel antagonists

scientific article published on 27 February 2012

Two-body wear rate of CAD/CAM resin blocks and their enamel antagonists

scientific article published on 01 May 2013

Ultra-thin occlusal veneers bonded to enamel and made of ceramic or hybrid materials exhibit load-bearing capacities not different from conventional restorations

scientific article published on 27 September 2018

Using stereophotogrammetric technology for obtaining intraoral digital impressions of implants.

scientific article published on April 2014

Wear analysis and topographical properties of monolithic zirconia and CoCr against human enamel after polishing and glazing procedures

scientific article published on 24 February 2020

Workflow description of additively manufactured clear silicone indexes for injected provisional restorations: A novel technique

scientific article published on 04 March 2019

Workflow of a fiber-reinforced composite fixed dental prosthesis by using a 4-piece additive manufactured silicone index: A dental technique

scientific article published on 03 May 2020

Y-TZP ceramic processing from coprecipitated powders: a comparative study with three commercial dental ceramics.

scientific article published on 9 June 2008

Paulina is supported by:

About Paulina

Help