List of works - Guang Ye

3D Microstructure Simulation of Reactive Aggregate in Concrete from 2D Images as the Basis for ASR Simulation

A 3D Lattice Modelling Study of Drying Shrinkage Damage in Concrete Repair Systems

scientific article

A 3D reactive transport model for simulation of the chemical reaction process of ASR at microscale

A Lattice Boltzmann single component model for simulation of the autogenous self-healing caused by further hydration in cementitious material at mesoscale

A Low-Autogenous-Shrinkage Alkali-Activated Slag and Fly Ash Concrete

article by Zhenming Li et al published 2 September 2020 in Applied sciences

Coupled thermodynamic modelling and experimental study of sodium hydroxide activated slag

Effect of Moisture Exchange on Interface Formation in the Repair System Studied by X-ray Absorption.

scientific article published on 22 December 2015

Effect of the Sodium Silicate Modulus and Slag Content on Fresh and Hardened Properties of Alkali-Activated Fly Ash/Slag

article by Xiaowei Ouyang et al published 23 December 2019 in Minerals (Basel, Switzerland)

Effects of heat and pressure on hot-pressed geopolymer

Elastic Modulus of the Alkali-Silica Reaction Rim in a Simplified Calcium-Alkali-Silicate System Determined by Nano-Indentation.

scientific article published on 20 September 2016

Evaluating compressive mechanical LDPM parameters based on an upscaled multiscale approach

Failure Modes in Concrete Repair Systems due to Ongoing Corrosion

Ink-bottle Effect and Pore Size Distribution of Cementitious Materials Identified by Pressurization⁻Depressurization Cycling Mercury Intrusion Porosimetry

scientific article published on 05 May 2019

Investigation on the potential utilization of zeolite as an internal curing agent for autogenous shrinkage mitigation and the effect of modification

Microstructure-Based Prediction of the Elastic Behaviour of Hydrating Cement Pastes

Modeling Framework for Fracture in Multiscale Cement-Based Material Structures.

scientific article published on 26 May 2017

New insights into long-term chloride transport in unsaturated cementitious materials: Role of degree of water saturation

Numerical Modelling of the Effect of Filler/Matrix Interfacial Strength on the Fracture of Cementitious Composites

scientific article published on 06 August 2018

Numerical Studies of the Effects of Water Capsules on Self-Healing Efficiency and Mechanical Properties in Cementitious Materials

Numerical simulation of the initial particle parking structure of cement/geopolymer paste and the dissolution of amorphous silica using real-shape particles

Pore Structure Characterization of Sodium Hydroxide Activated Slag Using Mercury Intrusion Porosimetry, Nitrogen Adsorption, and Image Analysis.

scientific article

Pore size dependent connectivity and ionic transport in saturated cementitious materials

Preliminary Interpretation of the Induction Period in Hydration of Sodium Hydroxide/Silicate Activated Slag

scientific article published on 27 October 2020

Relationship between the Size of the Samples and the Interpretation of the Mercury Intrusion Results of an Artificial Sandstone

scientific article

Role of Curing Conditions and Precursor on the Microstructure and Phase Chemistry of Alkali-Activated Fly Ash and Slag Pastes

article by Marija Nedeljković et al published 12 April 2021 in Materials

Setting, Strength, and Autogenous Shrinkage of Alkali-Activated Fly Ash and Slag Pastes: Effect of Slag Content

scientific article published on 29 October 2018

Studies on the Alkali-Silica Reaction Rim in a Simplified Calcium-Alkali-Silicate System

scientific article published on 9 August 2016

THz Fingerprints of Cement-Based Materials

scientific article published on 21 September 2020

The shrinkage of alkali activated fly ash

article by Y. Ma & Guang Ye published February 2015 in Cement and Concrete Research

Upscaling Cement Paste Microstructure to Obtain the Fracture, Shear, and Elastic Concrete Mechanical LDPM Parameters.

scientific article

Utilization of miscanthus combustion ash as internal curing agent in cement-based materials: Effect on autogenous shrinkage

article published in 2019

List of works by Guang Ye

3D Microstructure Simulation of Reactive Aggregate in Concrete from 2D Images as the Basis for ASR Simulation

A 3D Lattice Modelling Study of Drying Shrinkage Damage in Concrete Repair Systems

A 3D reactive transport model for simulation of the chemical reaction process of ASR at microscale

A Lattice Boltzmann single component model for simulation of the autogenous self-healing caused by further hydration in cementitious material at mesoscale

A Low-Autogenous-Shrinkage Alkali-Activated Slag and Fly Ash Concrete

Coupled thermodynamic modelling and experimental study of sodium hydroxide activated slag

Effect of Moisture Exchange on Interface Formation in the Repair System Studied by X-ray Absorption.

Effect of the Sodium Silicate Modulus and Slag Content on Fresh and Hardened Properties of Alkali-Activated Fly Ash/Slag

Effects of heat and pressure on hot-pressed geopolymer

Elastic Modulus of the Alkali-Silica Reaction Rim in a Simplified Calcium-Alkali-Silicate System Determined by Nano-Indentation.

Evaluating compressive mechanical LDPM parameters based on an upscaled multiscale approach

Failure Modes in Concrete Repair Systems due to Ongoing Corrosion

Ink-bottle Effect and Pore Size Distribution of Cementitious Materials Identified by Pressurization⁻Depressurization Cycling Mercury Intrusion Porosimetry

Investigation on the potential utilization of zeolite as an internal curing agent for autogenous shrinkage mitigation and the effect of modification

Microstructure-Based Prediction of the Elastic Behaviour of Hydrating Cement Pastes

Modeling Framework for Fracture in Multiscale Cement-Based Material Structures.

New insights into long-term chloride transport in unsaturated cementitious materials: Role of degree of water saturation

Numerical Modelling of the Effect of Filler/Matrix Interfacial Strength on the Fracture of Cementitious Composites

Numerical Studies of the Effects of Water Capsules on Self-Healing Efficiency and Mechanical Properties in Cementitious Materials

Numerical simulation of the initial particle parking structure of cement/geopolymer paste and the dissolution of amorphous silica using real-shape particles

Pore Structure Characterization of Sodium Hydroxide Activated Slag Using Mercury Intrusion Porosimetry, Nitrogen Adsorption, and Image Analysis.

Pore size dependent connectivity and ionic transport in saturated cementitious materials

Preliminary Interpretation of the Induction Period in Hydration of Sodium Hydroxide/Silicate Activated Slag

Relationship between the Size of the Samples and the Interpretation of the Mercury Intrusion Results of an Artificial Sandstone

Role of Curing Conditions and Precursor on the Microstructure and Phase Chemistry of Alkali-Activated Fly Ash and Slag Pastes

Setting, Strength, and Autogenous Shrinkage of Alkali-Activated Fly Ash and Slag Pastes: Effect of Slag Content

Studies on the Alkali-Silica Reaction Rim in a Simplified Calcium-Alkali-Silicate System

THz Fingerprints of Cement-Based Materials

The shrinkage of alkali activated fly ash

Upscaling Cement Paste Microstructure to Obtain the Fracture, Shear, and Elastic Concrete Mechanical LDPM Parameters.

Utilization of miscanthus combustion ash as internal curing agent in cement-based materials: Effect on autogenous shrinkage