List of works - Joanne Jung Eun Choi

Adhesion of Denture Characterizing Composites to Heat-Cured, CAD/CAM and 3D Printed Denture Base Resins

scientific article published on 20 November 2020

Adhesive evaluation of three types of resilient denture liners bonded to heat-polymerized, autopolymerized, or CAD-CAM acrylic resin denture bases

scientific article published on 29 June 2018

Bond Strength between CAD/CAM PMMA Denture Base Resins and Characterisation Composites

Bond Strength of Denture Teeth to Heat-Cured, CAD/CAM and 3D Printed Denture Acrylics

scientific article published on 07 November 2019

Bulk-Fill Direct Restorative Materials: An In Vitro Assessment of Their Physio-Mechanical Properties

Comparison of hardness and polishability of various occlusal splint materials

scientific article published on 17 December 2020

Continuous Measurement of Intraoral pH and Temperature

2017 doctoral thesis by Joanne Jung Eun Choi at University of Otago

Curing through Ceramics: Influence of Different Light-Curing Units and Curing Modes on Bond Strength

Dental high-speed handpiece and ultrasonic scaler aerosol generation levels and the effect of suction and air supply

scientific article published in 2022

Denture–Mucosa Pressure Distribution and Pressure–Pain Threshold in In Vivo, In Vitro and In Silico Studies: A Literature Review

Development and Analysis of a Hydroxyapatite Supplemented Calcium Silicate Cement for Endodontic Treatment

Different Undercut Depths Influence on Fatigue Behavior and Retentive Force of Removable Partial Denture Clasp Materials: A Systematic Review

Diurnal variation of intraoral pH and temperature

scientific article published on 30 June 2017

Effect of Enamel Bleaching on the Bond Strength of Ceramic—A Systematic Review

Effect of various printing parameters on the accuracy (trueness and precision) of 3D-printed partial denture framework

Efficacy and safety of Botulinum toxin A for improving esthetics in facial complex: A systematic review

Evaluation of surface roughness, hardness and elastic modulus of nanoparticle containing light-polymerized denture glaze materials

scientific article published on 20 December 2019

Evaluation of wear behaviour of various occlusal splint materials and manufacturing processes

Fibre-reinforced and repaired PMMA denture base resin: Effect of placement on the flexural strength and load-bearing capacity

Finite element models and material data for analysis of infant head impacts

scientific article published on 08 December 2018

Influence of build angulation on the mechanical properties of a direct-metal laser-sintered cobalt-chromium used for removable partial denture frameworks

scientific article published on 03 September 2020

Investigation of dental elastomers as oral mucosa simulant materials

Mechanical properties of human oral mucosa tissues are site dependent: A combined biomechanical, histological and ultrastructural approach

scientific article published on 02 July 2020

New aerosol‐decreasing dental handpiece functions sufficiently decrease pulp temperature: An in vitro study

Optical Properties and Color Stability of Denture Teeth—A Systematic Review

Optical and mechanical properties of conventional, milled and 3D-printed denture teeth

Patient satisfaction with esthetics, phonetics, and function following implant-supported fixed restorative treatment in the esthetic zone: A systematic review

scientific article published on 27 July 2020

Real-time in vitro measurement of denture-mucosa pressure distribution in a typical edentulous patient with and without implants: Development of a methodology

Real-time pulp temperature change at different tooth sites during fabrication of temporary resin crowns

scientific article published on 05 December 2019

The Effectiveness of Dental Bleaching during Orthodontic Treatment with Clear Aligners: A Systematic Review

The Influence of Polishing on the Mechanical Properties of Zirconia—A Systematic Review

The cooling efficiency of different dental high-speed handpiece coolant port designs

scientific article published on 26 August 2019

List of works by Joanne Jung Eun Choi