Search filters

List of works by André R Studart

3D Printed Scaffolds for Monolithic Aerogel Photocatalysts with Complex Geometries

scientific article published in 2021

3D Printing of Emulsions and Foams into Hierarchical Porous Ceramics

scientific article published on 28 September 2016

3D Printing of Hierarchical Silk Fibroin Structures

scientific article

3D Printing of Materials with Tunable Failure via Bioinspired Mechanical Gradients

scientific article published on 16 January 2018

3D Printing of Salt as a Template for Magnesium with Structured Porosity

scientific article published on 29 July 2019

3D Printing of Strong Lightweight Cellular Structures Using Polysaccharide-Based Composite Foams

3D Printing: Complex‐Shaped Cellulose Composites Made by Wet Densification of 3D Printed Scaffolds (Adv. Funct. Mater. 4/2020) ⬇️

scholarly article

3D printing of bacteria into functional complex materials

scientific article published in December 2017

3D printing of concentrated emulsions into multiphase biocompatible soft materials.

scientific article published on 6 February 2017

3D printing of robotic soft actuators with programmable bioinspired architectures.

scientific article published on 28 February 2018

3D printing of sacrificial templates into hierarchical porous materials

scientific article published in Scientific Reports

Acoustophoresis of disk-shaped microparticles: A numerical and experimental study of acoustic radiation forces and torques

scientific article published in November 2015

Active cargo transport with Janus colloidal shuttles using electric and magnetic fields

scientific article published on 01 June 2018

Addendum: Magnetically assisted slip casting of bioinspired heterogeneous composites

scientific article published in November 2017

Additive manufacturing of biologically-inspired materials

scientific article published on 11 January 2016

Architectured ZnO-Cu particles for facile manufacturing of integrated Li-ion electrodes

scientific article published on 24 July 2020

Arrested coalescence of particle-coated droplets into nonspherical supracolloidal structures

scientific article published on 01 March 2009

Bio-inspired self-shaping ceramics.

scientific article

Bioinspired ceramics: Turning brittleness into toughness

scientific article published on 01 May 2014

Bioinspired design and assembly of platelet reinforced polymer films

scientific article published on 01 February 2008

Bioinspired materials that self-shape through programmed microstructures

scientific article published in March 2014

Bioinspired spring origami.

scientific article published in March 2018

Biologically inspired dynamic material systems

scientific article published on 12 January 2015

Cellulose-Based Microparticles for Magnetically Controlled Optical Modulation and Sensing

scientific article published on 05 December 2019

Ceramic–polymer composites with improved dielectric and tribological properties for semi-active damping

Change of zeta potential of biocompatible colloidal oxide particles upon adsorption of bovine serum albumin and lysozyme

scientific article published on 01 August 2005

Colloidal Stabilization of Nanoparticles in Concentrated Suspensions

article

Colloidal shuttles for programmable cargo transport.

scientific article published on 30 November 2017

Compact and ordered colloidal clusters from assembly-disassembly cycles: a numerical study.

scientific article published on 4 November 2014

Composites reinforced in three dimensions by using low magnetic fields

scientific article published in January 2012

Composites reinforced via mechanical interlocking of surface-roughened microplatelets within ductile and brittle matrices

scientific article

Conformal Bacterial Cellulose Coatings as Lubricious Surfaces

scientific article published on 13 March 2020

Cyclic fatigue in water of veneer-framework composites for all-ceramic dental bridges

scientific article published on 21 February 2006

Design of textured multi-layered structures via magnetically assisted slip casting

scientific article published on 01 May 2019

Designer Polymer-Based Microcapsules Made Using Microfluidics ⬇️

scientific article published on December 12, 2011

Designer liquid-liquid interfaces made from transient double emulsions

scientific article published in Nature Communications

Designing macroporous polymers from particle-stabilized foams

scientific article

Dome-Patterned Metamaterial Sheets

scientific article published on 07 October 2020

Droplet Microfluidics for Fabrication of Non-Spherical Particles

scientific article published on 24 November 2009

Drying of complex suspensions

scientific article published on 24 March 2010

Dynamics of Cellulose Nanocrystal Alignment during 3D Printing

scientific article published on 11 July 2018

Early Dynamics and Stabilization Mechanisms of Oil-in-Water Emulsions Containing Colloidal Particles Modified with Short Amphiphiles: A Numerical Study

scientific article published on 27 November 2017

Emulsions Stabilized by Chitosan-Modified Silica Nanoparticles: pH Control of Structure–Property Relations

scientific article published on 17 May 2018

Encapsulation of aliphatic amines using microfluidics

scientific article

Facile Manufacturing Route for Magneto‐Responsive Soft Actuators

scientific article published on 7 May 2021

Fatigue of zirconia and dental bridge geometry: Design implications ⬇️

scientific article published on September 1, 2010

Fatigue of zirconia under cyclic loading in water and its implications for the design of dental bridges

scientific article published on 13 February 2006

Filtered Mechanosensing Using Snapping Composites with Embedded Mechano-Electrical Transduction

scientific article published on 09 April 2019

Freezing of Gelled Suspensions: a Facile Route toward Mesoporous TiO2 Particles for High-Capacity Lithium-Ion Electrodes

Functional Microcapsules with Hybrid Shells Made via Sol-Gel Reaction within Double Emulsions

scientific article published on 16 August 2017

General route for the assembly of functional inorganic capsules

scientific article published on 01 November 2009

Geologically-inspired strong bulk ceramics made with water at room temperature

scientific article published on 06 March 2017

Hierarchical Toughening of Nacre-Like Composites

Hierarchical porous materials made by drying complex suspensions

scientific article published on 30 December 2010

Hierarchical porous materials made by stereolithographic printing of photo-curable emulsions

scientific article published on 16 November 2021

Hierarchically roughened microplatelets enhance the strength and ductility of nacre-inspired composites

scientific article published on 10 February 2016

High-Power Adsorption Heat Pumps Using Magnetically Aligned Zeolite Structures

scientific article published on 28 June 2019

In vitro lifetime of dental ceramics under cyclic loading in water

scientific article published on 26 January 2007

Injectable Materials with Magnetically Controlled Anisotropic Porosity ⬇️

scientific article published on 09 October 2012

Locally reinforced polymer-based composites for elastic electronics

scientific article published on 18 June 2012

Macroporous polymers from particle-stabilized emulsions

scientific article

Macroporous polymers from particle-stabilized foams

scientific article

Magnetic Manipulation of Superparamagnetic Colloids in Droplet‐Based Optical Devices

scientific article published on 27 July 2023

Magnetic Transport, Mixing and Release of Cargo with Tailored Nanoliter Droplets ⬇️

scientific article published on March 26, 2012

Magnetic assembly of transparent and conducting graphene-based functional composites

scientific article published on 29 June 2016

Magnetic propulsion of colloidal microrollers controlled by electrically modulated friction

scientific article published on 08 December 2020

Magnetically assisted slip casting of bioinspired heterogeneous composites.

scientific article

Mechanical and fracture behavior of veneer-framework composites for all-ceramic dental bridges

scientific article published on 13 February 2006

Mechanical strength and subcritical crack growth under wet cyclic loading of glass-infiltrated dental ceramics

scientific article published on 01 May 2010

Mechanics of platelet-reinforced composites assembled using mechanical and magnetic stimuli

scientific article published on 25 October 2013

Metallic foams from nanoparticle-stabilized wet foams and emulsions

scientific article

Mineral Nano-Interconnectivity Stiffens and Toughens Nacre-like Composite Materials

scientific article published on 22 December 2016

Monodisperse Functional Colloidosomes with Tailored Nanoparticle Shells ⬇️

scientific article published on 08 March 2011

Multifunctional microparticles with uniform magnetic coatings and tunable surface chemistry

Multimaterial magnetically assisted 3D printing of composite materials

scientific article

Multiwalled functional colloidosomes made small and in large quantities via bulk emulsification

scientific article published on 01 January 2014

Nanoparticle-filled complex colloidosomes for tunable cargo release.

scientific article

Non-linear alignment dynamics in suspensions of platelets under rotating magnetic fields

scientific article

One-Step Bulk Fabrication of Polymer-Based Microcapsules with Hard-Soft Bilayer Thick Shells.

scientific article

Periodically microstructured composite films made by electric- and magnetic-directed colloidal assembly

scientific article

Pickering and Network Stabilization of Biocompatible Emulsions Using Chitosan-Modified Silica Nanoparticles

scientific article

Processing Routes to Macroporous Ceramics: A Review

scientific article (publication date: June 2006)

Programmable snapping composites with bio-inspired architecture.

scientific article published on 13 March 2017

Programming soft robots with flexible mechanical metamaterials

scientific article published on 01 April 2019

Publisher Correction: Architectured ZnO-Cu particles for facile manufacturing of integrated Li-ion electrodes

scientific article published on 02 October 2020

Quantifying the role of mineral bridges on the fracture resistance of nacre-like composites

scientific article

Robust Microcompartments with Hydrophobically Gated Shells

scientific article published on 19 June 2015

Self-shaping composites with programmable bioinspired microstructures

scientific article published in January 2013

Silk fibroin scaffolds with inverse opal structure for bone tissue engineering.

scientific article published on 13 July 2016

Stabilization of foams with inorganic colloidal particles

scientific article published on 01 December 2006

Stabilization of oil-in-water emulsions by colloidal particles modified with short amphiphiles

scientific article published on 12 June 2008

Stretchable heterogeneous composites with extreme mechanical gradients

scientific article published in Nature Communications

Strong Dual-Compartment Microcapsules Loaded with High Cargo Contents

scientific article

Strong Microcapsules with Permeable Porous Shells Made through Phase Separation in Double Emulsions.

scientific article published on 14 February 2017

Tailoring the microstructure of particle-stabilized wet foams

scientific article published on 01 January 2007

Textured and hierarchically structured calcium phosphate ceramic blocks through hydrothermal treatment.

scientific article

Three-dimensional printing of hierarchical liquid-crystal-polymer structures

scientific article published in Nature

Three-dimensional printing of multicomponent glasses using phase-separating resins

scientific article published on 11 November 2019

Towards high-performance bioinspired composites

Transparent and tough bulk composites inspired by nacre.

scientific article published on 26 June 2019

Ultrahigh magnetically responsive microplatelets with tunable fluorescence emission

scientific article published on 15 November 2013

Ultrastable particle-stabilized foams

scientific article published on 01 May 2006

Unifying Model for the Electrokinetic and Phase Behavior of Aqueous Suspensions Containing Short and Long Amphiphiles ⬇️

scientific article published on 02 September 2011

Wetting controls of droplet formation in step emulsification

scientific article published on 05 September 2018

Paulina is supported by:

About Paulina

Help