Search filters

List of works by Ryosuke O Suzuki

(Invited) Metal Production in CaCl 2 -Based Melts

scientific article published on 23 July 2018

(Invited) Metal Production in CaCl 2 -Based Melts

scientific article

A Superhydrophilic Aluminum Surface with Fast Water Evaporation Based on Anodic Alumina Bundle Structures via Anodizing in Pyrophosphoric Acid

scientific article published on 25 October 2019

Alkaline Corrosion-Resistant Anodic Aluminum Oxide Formed By Etidronic Acid Anodizing

scientific article published in September 2019

Aluminum bulk micromachining through an anodic oxide mask by electrochemical etching in an acetic acid/perchloric acid solution

scientific article published in November 2013

An Innovative Process for Production of Ti Metal Powder via TiSx from TiN

scientific article published on 20 November 2019

Analysis of the Performance of Thermoelectric Modules Under Concentrated Radiation Heat Flux

scientific article published on 2 December 2015

Anodizing Aluminum and Its Alloys in Etidronic Acid to Enhance Their Corrosion Resistance in a Sodium Chloride Solution

scientific article published on 9 January 2020

Anodizing of Aluminum in Etidronic Acid Solution

scientific article published in September 2016

CO Gas Production by CO 2 Gas Decomposition in Molten Salt Electrolysis

scientific article published in September 2016

CO Gas Production by Molten Salt Electrolysis from CO<sub>2</sub> Gas

scientific article published in 2015

CO2 gas decomposition to carbon by electro-reduction in molten salts

scientific article published in June 2013

Calciothermic Reduction of TiCl4 Gas during the Electrolysis of CaCl2 Melt

scientific article published on 29 August 2009

Calciothermic reduction of NiO by molten salt electrolysis of CaO in CaCl2 melt

scientific article published in October 2011

Calciothermic reduction of TiO2 and in situ electrolysis of CaO in the molten CaCl2

article published in 2005

Characterization of Liquid Trickle Flow in Poor-Wetting Packed Bed

scientific article published in 2015

Characterization of the Cathodic Thermal Behavior of Molten CaCl 2 and Its Hygroscopic Chloride Mixture During Electrolysis

scientific article published on 12 June 2020

Column and film lifetimes in bubble-induced two-liquid flow

scientific article published on 01 June 2018

Compositional range of the Bi2Sr2CaCu2OxHTc-superconductor and its surrounding phases

journal article from 'Physica C: Superconductivity' published in 1992

Corrosion-Resistant Porous Alumina Formed via Anodizing Aluminum in Etidronic Acid and Its Pore-Sealing Behavior in Boiling Water

scientific article published in 2019

DEM-SPH study of molten slag trickle flow in coke bed

scientific article published in January 2018

Decomposition of CO 2 Gas in CaCl 2 -CaO and LiCl-Li 2 O Molten Salts

scientific article published on 15 March 2013

Design and Numerical Evaluation of Cascade-Type Thermoelectric Modules

scientific article published on 26 January 2013

Dimensional Analysis of Thermoelectric Modules Under Constant Heat Flux

scientific article published on 5 August 2014

Direct Production of Ti–29Nb–13Ta–4.6Zr Biomedical Alloy from Oxide Mixture in Molten CaCl[sub 2]

scientific article published in 2010

Durability of Silicide-Based Thermoelectric Modules at High Temperatures in Air

scientific article published on 22 April 2015

Electronic structure and magnetic properties of monoclinic β -Cu 2 V 2 O 7 : A GGA + U study

scientific article published on 3 March 2009

Exploration for the Self-ordering of Porous Alumina Fabricated via Anodizing in Etidronic Acid

scientific article published in September 2016

Fabrication of Anodic Porous Alumina by Squaric Acid Anodizing

scientific article published in March 2014

Fabrication of Self-Ordered Porous Alumina via Etidronic Acid Anodizing and Structural Color Generation from Submicrometer-Scale Dimple Array

scientific article published in February 2015

Fabrication of Sticky and Slippery Aluminum Alloys Based on Anodic Alumina Nanofibers

scientific article published in September 2019

Fabrication of Sticky and Slippery Superhydrophobic Aluminum Surfaces Covered with Nanostructured Anodic Oxide

scientific article published on 23 November 2020

Fabrication of Sticky and Slippery Superhydrophobic Aluminum Surfaces Via Pyrophosphoric Acid Anodizing and SAM Modification

scientific article published on 23 July 2018

Fabrication of Superhydrophobic Aluminum Surfaces By Pyrophosphoric Acid Anodizing and SAM Modification

scientific article published in September 2017

Fabrication of a meniscus microlens array made of anodic alumina by laser irradiation and electrochemical techniques

scientific article published in April 2013

Fabrication of a micro-porous Ti–Zr alloy by electroless reduction with a calcium reductant for electrolytic capacitor applications

scientific article published in February 2014

Fabrication of a novel aluminum surface covered by numerous high-aspect-ratio anodic alumina nanofibers

scientific article published in November 2015

Fabrication of a plasma electrolytic oxidation/anodic aluminum oxide multi-layer film via one-step anodizing aluminum in ammonium carbonate

scientific article published in March 2020

Fabrication of anodic porous alumina via anodizing in cyclic oxocarbon acids

scientific article published in September 2014

Fabrication of self-ordered porous alumina via anodizing in sulfate solutions

scientific article published in November 2016

Formation of Titanium Sulfide from Titanium Oxycarbonitride by CS2 Gas

scientific article published on 9 May 2018

Formation of niobium powder by electrolysis in molten salt

scientific article published in June 2013

Growth Behavior of Anodic Alumina Nanofibers Fabricated By Pyrophosphoric Acid Anodizing and Their Hydrophilicity

scientific article published in September 2016

Growth behavior of anodic oxide formed by aluminum anodizing in glutaric and its derivative acid electrolytes

scientific article published in December 2014

Growth behavior of anodic porous alumina formed in malic acid solution

scientific article published in November 2013

Hard Porous Alumina Coatings Via Etidronic Acid Anodizing

scientific article published on 23 July 2018

High-Speed Observation of Electrolytic Deposition of Liquid Lithium Droplets in LiCl-KCl Melt

scientific article published in September 2017

Influence of Current Density on the Reduction of TiO<SUB>2</SUB> in Molten Salt (CaCl<SUB>2</SUB> + CaO)

scientific article published in 2009

Influence of Gas Injection Pipe on CO<sub>2</sub> Decomposition by CaCl<sub>2</sub>-CaO Molten Salt and ZrO<sub>2</sub> Solid Electrolysis

scientific article published in 2016

Model study of the effect of particles structure on the heat and mass transfer through the packed bed in ironmaking blast furnace

scientific article published in December 2015

Multiphase Particle Simulation of Gas Bubble Passing Through Liquid/Liquid Interfaces

scientific article published in 2014

Nanostructure of Anodic Porous Alumina Fabricated By Galvanostatic Anodizing in Etidronic Acid

scientific article published on 23 November 2020

New n-type Silicide Thermoelectric Material with High Oxidation Resistance

scientific article published in 2013

Niobium powder synthesized by calciothermic reduction of niobium hydroxide for use in capacitors

scientific article published in March 2015

Numerical Analysis of Carbon Monoxide–Hydrogen Gas Reduction of Iron Ore in a Packed Bed by an Euler–Lagrange Approach

scientific article published on 23 July 2014

Numerical Optimization of Trapezoidal Thermoelectric Elements for Double-Pipe-Shaped Module

scientific article published on 16 September 2015

Numerical Study of Binary Trickle Flow of Liquid Iron and Molten Slag in Coke Bed by Smoothed Particle Hydrodynamics

scientific article published on 14 February 2020

Observation of Interface Deformation in Sodium Polytungstate Solution–Silicone Oil System due to Single Rising Bubble

Optimization of Module Shape in Thermoelectric Power Generation

scientific article published in June 2014

Optimum Exploration for the Self-Ordering of Anodic Porous Alumina Formed via Selenic Acid Anodizing

scientific article published in 2015

Performance Analysis of Thermoelectric Modules Consisting of Square Truncated Pyramid Elements Under Constant Heat Flux

scientific article published on 8 January 2018

Performance Simulation of a Flat-Plate Thermoelectric Module Consisting of Square Truncated Pyramid Elements

scientific article published on 9 September 2016

Phase Equilibria and Thermodynamics in the Sr-Cu-O and Ca-Cu-O Systems

book section published in 1993

Polymer nanoimprinting using an anodized aluminum mold for structural coloration

scientific article published in June 2015

Production of Nb–Ti–Ni alloy in molten CaCl2

scientific article published in June 2013

Quantification of the Impact of Residual H2O on Cathodic Behavior in Molten CaCl2 Electrolysis

scientific article published on 22 February 2022

Rapid fabrication of self-ordered porous alumina with 10-/sub-10-nm-scale nanostructures by selenic acid anodizing.

scientific article published on 25 September 2013

Rapid reduction of titanium dioxide nano-particles by reduction with a calcium reductant

scientific article published in September 2014

SPH simulations of the behavior of the interface between two immiscible liquid stirred by the movement of a gas bubble

scientific article published in February 2016

Self-Ordering Behavior of Anodic Porous Alumina via Selenic Acid Anodizing

scientific article published in August 2014

Self-Ordering of Porous Anodic Alumina Fabricated by Anodizing in Chromic Acid at High Temperature

scientific article published in September 2021

Self-ordered Porous Alumina Fabricated via Phosphonic Acid Anodizing

scientific article published in February 2016

Simulation Analysis of Tilted Polyhedron-Shaped Thermoelectric Elements

scientific article published on 30 September 2014

Simulation of a Thermoelectric Module Having Parallelogram Elements

scientific article published in 2014

Solubility of gaseous carbon dioxide in molten LiCl–Li2O

scientific article published in January 2015

Spontaneous colloidal metal network formation driven by molten salt electrolysis

scientific article published on 30 August 2018

Stable mesh-free moving particle semi-implicit method for direct analysis of gas–liquid two-phase flow

scientific article published in May 2014

Structural Characterization of Anodic Porous Alumina Formed By Galvanostatic Anodizing in Etidronic Acid

scientific article published in September 2019

Structural Investigation and Indium Substitution in the Thermoelectric Mn2.7Cr0.3Si4Al2−x In x Series

scientific article published on 9 February 2016

Superhydrophilic and Superhydrophobic Aluminum Alloys Fabricated By Pyrophosphoric Acid Anodizing

scientific article published in September 2017

Superhydrophilic and superhydrophobic aluminum alloys fabricated via pyrophosphoric acid anodizing and fluorinated SAM modification

scientific article published in November 2017

Superhydrophilicity of a nanofiber-covered aluminum surface fabricated via pyrophosphoric acid anodizing

scientific article published in December 2016

Synthesis of Silicon Sulfide by Using CS2 Gas

scientific article published on 3 March 2021

Temperature Dependence of Behavior of Interface Between Molten Sn and LiCl–KCl Eutectic Melt Due to Rising Gas Bubble

scientific article published on 23 February 2016

Thermodynamics and Phase Equilibria in the SrCuO System

journal article from 'Journal of the American Ceramic Society' published in 1992

Thermoelectric Analysis for Helical Power Generation Systems

scientific article published on 8 October 2013

Thermoelectric Analysis for a Three-Dimensional Power Generator in Helical

scientific article published in June 2014

Thermoelectric Generation Using Water Lenses

scientific article published on 5 March 2013

Thermoelectric Properties of Zr3Mn4Si6 and TiMnSi2

scientific article published on 11 December 2009

Ultra-high density single nanometer-scale anodic alumina nanofibers fabricated by pyrophosphoric acid anodizing

scientific article published on 10 December 2014

Using a Water Lens for Light Concentration in Thermoelectric Generation

scientific article published on 31 March 2014