List of works by Stanley A. Shulman

A method for estimation of bias and variability of continuous gas monitor data: application to carbon monoxide monitor accuracy

journal article published in 2002

A pilot study on the effects of two ventilation methods on weld fume exposures in a shipyard confined space welding task

journal article published in 2002

Acceptance sampling using judgmental and randomly selected samples

book or book chapter published in 2010

Adjusting for the effect of environmental variability in outdoor engineering control studies

conference abstract published in 2003

Adjusting for the effect of environmental variability in outdoor engineering control studies; detailed derivations

publication published in 2003

An Evaluation of ASTM Method P-42-97 for Sampling and Analysis of Metalworking Fluids

scientific article published on November 1, 2003

An Evaluation of H2S Continuous Monitors Using Metal Oxide Semiconductor Sensors

publication

An environmental sampling model for combining judgmental and randomly placed samples

book or book chapter published in 2007

An evaluation of H2S continuous monitors using metal oxide semiconductor sensors

journal article published in 1988

An evaluation of glove bag containment in asbestos removal

NIOSH publication published in 1990

An evaluation of wet and dry methods for decreasing exposure to refractory ceramic fibers (RCF) during grinding and sanding

abstract published in 2000

An example from proficiency testing of the application of principal components to the estimation of variance components in mixed models

conference proceedings item published in 2001

An investigation of the performance of the 10-mm nylon cyclone

journal article published in 1987

Approaches to modeling the concentration field for adaptive sampling of contaminants during site decontamination

chapter published in 2006

Asbestos PCM Fiber Counting Performance in the Proficiency Analytical Testing Program

publication published in 1995

Best practice engineering control guidelines to control worker exposure to respirable crystalline silica during asphalt pavement milling

NIOSH publication published in 2015

Carbon monoxide and houseboats: an evaluation of a stack exhaust system to reduce poisonings associated with generator exhaust

journal article published in 2003

Case studies: comparing exposure levels by type of welding operation and evaluating the effectiveness of fume extraction guns

journal article published in 2001

Characterization of selected vapor-phase organic emissions

publication published in 1984

Charcoal tubes vs. passive dosimetry for perchloroethylene: a comparison of two methods

abstract published in 2002

Comparison of mist generation of micro-lubrication and flood application of metalworking fluids during machining

field study published in 2001

Comparison of mist generation rates for an experimental metal removal fluid with a baseline fluid during milling and turning operations at TechSolve, Inc., Cincinnati, Ohio

field study published in 2005

Comparison of mist generation rates for micro-lubrication and flood application of cutting fluids during milling and drilling

abstract published in 2001

Comparison of three sampling and analytical methods for measuring m-xylene in expired air of exposed humans

journal article published in 1990

Computational formulas for total relative standard deviations of combined gravimetric-analytic determinations

publication published in 1997

Control of wake-induced exposure using an interrupted oscillating jet

journal article published in 2003

Control of wake-induced exposure using an interrupted oscillating jet

abstract published in 2000

Control technology for ready-mix truck drum cleaning at Hilltop Basic Resources, Cincinnati, Ohio

field study published in 2001

Controlling wood dust from orbital hand sanders

journal article published in 1996

Corrections to the target and critical values for the National Institute for Occupational Safety and Health validation tests

journal article published in 1996

Data supporting ASTM method D 7049-04, for determination of metalworking fluids

journal article published in 2005

Data supporting a provisional ASTM method for metalworking fluids, part 3. Evaluation of an ASTM method for metalworking fluids in a survey of metalworking facilities

journal article published in 2002

Data supporting a provisional American Society for Testing and Materials (ASTM) method for metalworking fluids, part 2: preliminary report of evaluation of a ternary solvent blend in a provisional ASTM method for metalworking fluids

journal article published in 1999

Development and evaluation of methods

chapter published in 2003

Development of NIOSH Method 5042: total particulates and benzene soluble fraction (asphalt fume)

abstract published in 1998

Direct sampling of organic solvents in expired breath with a new solid sorbent sampling device

journal article published in 1988

Electromyographic and discomfort analysis of a confined-space welding task

conference abstract published in 2000

Electromyographic and discomfort analysis of confined-space shipyard welding processes

journal article published in 2001

Engineering controls for furniture strippers to meet the OSHA methylene chloride PEL

journal article published in 2002

Engineering controls for furniture strippers to meet the OSHA methylene chloride PEL [reply to letter to the editor]

publication published in 2002

Estimation of bias and variability of continuous gas monitor data: application to carbon monoxide monitor accuracy

field study published in 2001

Evaluating engineering controls during asphalt paving using a portable tracer gas method

abstract published in 1998

Evaluating engineering controls during asphalt paving using a portable tracer gas method

journal article published in 1999

Evaluating engineering controls during asphalt paving using a protable tracer gas method

abstract published in 1997

Evaluation of a local exhaust ventilation system for controlling refractory ceramic fibers during disc sanding

journal article published in 2004

Evaluation of a personal data logging monitor for carbon monoxide

journal article published in 1994

Evaluation of engineering controls for reducing emission of respirable crystalline silica for brick-cutting

abstract

Evaluation of engineering controls for the mixing of flavorings containing diacetyl and other volatile ingredients

journal article published in 2014

Evaluation of misting controls to reduce exposure to respirable crystalline silica for workers engaged in brick cutting

abstract published in 2004

Evaluation of misting controls to reduce respirable silica exposure for brick cutting

journal article published in 2005

Evaluation of the Magiscan image analyzer for asbestos fiber counting

journal article published in 1987

Exhaust ventilation design and occupational exposure to respirable crystalline silica during ready-mix concrete truck drum cleaning

abstract published in 2001

Factors affecting emission collection by surgical smoke evacuators

journal article published in 1990

Field evaluation of Blaw-Knox prototype engineering controls designed to reduce occupational exposures during asphalt paving operations; manufacturer: Blaw-Knox; paving contractor: Spartan Paving; paving location: Shiawassee County, Michigan

field study published in 2000

Fitting lognormal distributions to data from a size-sorting particle device

conference proceedings item published in 2004

Guidance for the evaluation of direct-reading gas and vapor monitors

abstract published in 2006

Guidelines for air sampling and analytical method development and evaluation

NIOSH publication published in 1995

Guidelines for air sampling and analytical method development and evaluation

publication published in 1994

Hexavalent chromium exposures and exposure-control technologies in American enterprise: results of a NIOSH field research study

journal article published in 2007

Identification and Counting of Asbestos Fibers

scientific article published on February 1, 1984

In-Depth survey of dust control technology for asphalt milling at Northeast Asphalt, Inc., US Route 22 and SR 64 Projects, Wisconsin

field study published in 2007

In-depth field evaluation... dust-control technology for asphalt pavement milling at New York State Thruway (Interstate Highway 90) resurfacing project, Donegal Construction, contractor, Hamburg, New York, September 25 and 26, 2006

field study published in 2009

In-depth field evaluation... dust-control technology for asphalt pavement milling at South Dakota Highway 79 resurfacing project, Border States Paving and Industrial Builders, contractors, Buffalo Gap, South Dakota, August 15 through 17, 2006

field study published in 2009

In-depth field evaluation... dust-control technology for asphalt pavement milling at U.S. Highway 2 resurfacing project, Midwest Asphalt, contractor, Wilton, Minnesota, June 20 through 22, 2006

field study published in 2009

In-depth report: expedient methods for surge airborne isolation within healthcare settings during response to a natural or manmade epidemic

field study published in 2012

In-depth survey report: a laboratory evaluation of a local exhaust ventilation system on a Caterpillar cold milling machine at Caterpillar, Minnesota

field study published in 2012

In-depth survey report: a laboratory evaluation of a local exhaust ventilation system on a Roadtec cold milling machine at Roadtec, Chattanooga, Tennessee

field study published in 2013

In-depth survey report: a laboratory evaluation of a prototype local exhaust ventilation system on a Terex cold milling machine at Terex Roadbuilding, Oklahoma City, Oklahoma

field study published in 2011

In-depth survey report: a laboratory evaluation of capture efficiencies of the vacuum cutting system on a Wirtgen W 250 cold milling machine at Payne & Dolan Inc., Racine, Wisconsin

field study published in 2011

In-depth survey report: control of methylene chloride during furniture stripping at Tri-County Furniture Stripping, Cincinnati, Ohio

field study published in 2000

In-depth survey report: control of perchloroethylene (PCE) in vapor degreasing operations, site #1

field study published in 2002

In-depth survey report: control of perchloroethylene (PCE) in vapor degreasing operations, site #2

field study published in 2002

In-depth survey report: control of perchloroethylene (PCE) in vapor degreasing operations, site #3

field study published in 2002

In-depth survey report: control of perchloroethylene (PCE) in vapor degreasing operations, site #4

field study published in 2002

In-depth survey report: control of respirable dust and crystalline silica from grinding concrete at Messer Construction, Newport, Kentucky and Baker Concrete Construction, Dayton, Ohio

field study published in 2002

In-depth survey report: control technology for crystalline silica exposure during pavement milling using a Roadtec Milling Machine equipped with a local exhaust ventilation system

field study published in 2013

In-depth survey report: control technology for crystalline silica exposure during pavement milling using a Wirtgen Milling Machine equipped with a vacuum cutting system

field study published in 2013

In-depth survey report: dust-control technology for asphalt-pavement milling

field study published in 2011

In-depth survey report: dust-control technology for asphalt-pavement milling controlled-site testing at State Highway 47, Bonduel, Wisconsin

field study published in 2011

In-depth survey report: evaluation of a Volvo milling machine equipped with a wet drum designed to reduce respirable crystalline silica exposure during pavement milling

field study published in 2013

In-depth survey report: evaluation of local exhaust ventilation system for advanced flat sorter machine at United States Postal Service, Baltimore Processing and Distribution Center, Baltimore, Maryland

field study published in 2002

In-depth survey report: evaluation of ventilation and filtration system for delivery bar code sorter at United States Postal Service Dulles Processing and Distribution Center, Dulles, Virginia

field study published in 2002

In-depth survey report: field evaluation of Caterpillar engineering controls designed to reduce occupational exposures during asphalt paving operations; manufacturer: Caterpillar Paving Products; paving contractor: Barriere Construction

field study published in 2000

In-depth survey report: field evaluation of Cedarapids engineering controls designed to reduce occupational exposures during asphalt paving operations; manufacturer: Cedarapids, Inc.; paving contractor: Milestone Contractors

field study published in 2000

In-depth survey report: field evaluation of Champion engineering controls designed to reduce occupational exposures during asphalt paving operations; Manufacturer: Champion Road Machinery, Inc.; Paving contractor: Rea Construction

field study published in 2000

In-depth survey report: field evaluation of Dynapac engineering controls designed to reduce occupational exposures during asphalt paving operations at Dynapac, Inc., San Antonio, Texas

field study published in 2000

In-depth survey report: field evaluation of Roadtec engineering controls designed to reduce occupational exposures during asphalt paving operations; manufacturer: Roadtec Paving Products; paving contractor: C.W. Matthews Contracting Company

field study published in 2000

In-depth survey report: multiple envelope particle expulsion test of an existing advanced facer canceller system (AFCS) and an AFCS 200 configuration at Siemens Industry, Mobility USA, Infrastructure Logistics Postal Solutions Arlington, Texas

field study published in 2010

In-depth survey report: respirable crystalline silica exposure during pavement milling using a Caterpillar milling machine equipped with a local exhaust ventilation system

field study published in 2014

In-depth survey report: single letter particle expulsion comparison of an existing advanced facer canceller system (AFCS) and an AFCS 200 configuration at Siemens Industry, Mobility USA, Infrastructure Logistics Postal Solutions Arlington, Texas

field study published in 2010

In-depth survey report: the effect of weld process and ventilation method on physical work load, weld fume exposure, and weld performance in a confined-space welding task at Jeffboat Shipyard, American Commercial Barge Lines (ACBL)

field study published in 2000

Indepth survey report: solid material sampling operations at Cabot Berylco Beryllium Alloy Plant, Reading, Pennsylvania

field study published in 1983

Interlaboratory evaluation of trace element determination in workplace air filter samples by inductively coupled plasma mass spectrometry

journal article published in 2012

Laboratory evaluations and performance reports for the Proficiency Analytical Testing (PAT) and Environmental Lead Proficiency Analytical Testing (ELPAT) programs

NIOSH publication published in 1994

Laboratory reports and rating criteria for the Proficiency Analytical Testing (PAT) program

NIOSH publication published in 1990

MDI concentrations during application of spray-on truck bed-liners

abstract published in 2004

Measurement uncertainty and NIOSH method accuracy range

chapter published in 2003

Measurement uncertainty and NIOSH method accuracy range

chapter published in 2016

Mesures Techniques de Prévention: Guide de Bonnes Pratiques Prévention de l’exposition professionnelle à la silice cristalline alvéolaire lors du rabotage des enrobés routiers

publication published in 2015

Modeling performance of engineering controls when reductions are largest at the highest environmental concentrations of the hazardous contaminant

conference proceedings item published in 2003

Performance of asbestos fiber counting laboratories in the NIOSH Proficiency Analytical Testing (PAT) program

journal article published in 1986

Performance of laboratories analyzing organic solvents in the Proficiency Analytical Testing program

journal article published in 1996

Performance of laboratories measuring silica in the Proficiency Analytical Testing program

scientific article published on January 1, 1992

Performance testing of NIOSH method 5524/ASTM method D-7049-04, for determination of metalworking fluids

journal article published in 2007

Personal carbon monoxide exposures among firefighters at prescribed forest burns in the southeastern United States

journal article published in 2013

Phase contrast microscopy asbestos fiber counting performance in the Proficiency Analytical Testing Program

journal article published in 1995

Relationship between correlations of repeated measurements and correlations of relative standard deviation estimates of these measurements; application to proficiency analytical testing program silica and asbestos data

publication published in 2002

Respirable crystalline silica exposures during asphalt pavement milling at eleven highway construction sites

journal article published in 2016

Results of a pilot study of dust control technology for asphalt milling at Payne and Dolan, Inc. US Route 12, Project, Wisconsin

field study published in 2004

Shipyard confined space welding intervention

abstract published in 2000

Some statistical procedures for analytical method accuracy tests and estimation

journal article published in 1996

Statistical analysis of the benzene soluble fraction in field blanks used in NIOSH Method 5042

abstract published in 2002

Status of worker exposure to asphalt paving fumes with the use of engineering controls

journal article published in 2006

Study of variables affecting extraction of organic solvents from solid sorbent sampling media using supercritical carbon dioxide

journal article published in 1996

Summary of the NIOSH guidelines for air sampling and analytical method development and evaluation

journal article published in 1996

Survey report: an engineering control evaluation for reducing exposure to refractory ceramic fibers during sanding conducted at Fireline, Inc. Youngstown, Ohio

field study published in 2003

Survey report: evaluation of an air shower for reducing exposure to carbon monoxide at United States Port of Entry, Calexico, California

field study published in 2004

The effect of two ventilation methods on weld fume exposure in a shipyard confined-space welding task

abstract published in 2001

The impact of maintenance and design for ventilation systems

journal article published in 2002

The quality of fiber count data

journal article published in 1989

Use of tracer gas technique for industrial exhaust hood efficiency evaluation - where to sample?

journal article published in 1986

Use of tracer gas techniques for industrial exhaust hood efficiency evaluation - application of sulfur hexafluoride for hood controlling particulate emissions

journal article published in 1985

Variance components in the two-way nested model with incomplete nesting information

journal article published in 1997