Search filters

List of works by Hongwei Hsiao

A biomechanical shoulder strain index based on stabilizing demand of shoulder joint.

journal article published in 2018

A cluster-based law enforcement body armor sizing system: concept, procedure, and design practice

journal article published in 2024

A commentary on fall-from-elevation research ⬇️

conference proceedings item published in 2011

A comparison of different postures for scaffold end-frame disassembly

journal article published in 2000

A new video-synchronized multichannel biomedical data acquisition system

journal article published in 2000

A video-synchronized high-speed-EMG and metabolic data acquisition system

conference proceedings item published in 2000

Accuracy and precision of two in-shoe pressure measurement systems

journal article published in 2002

Anthropometric changes among U.S. truck drivers

conference proceedings item published in 2009

Anthropometric criteria for the design of tractor cabs and protection frames

journal article published in 2005

Anthropometric differences among occupational groups

journal article published in 2002

Anthropometric procedures for design decisions: from flat map to 3D scanning ⬇️

conference proceedings item published in 2004

Anthropometric procedures for protective equipment sizing and design

journal article published in 2013

Anthropometric study of U.S. truck drivers: methods, summary statistics, and multivariate accommodation models ⬇️

NIOSH publication published in 2015

Anthropometric study of emergency medical services providers (EMSP) in the United States

journal article published in 2020

Anthropometric survey of respirator users ⬇️

abstract published in 2004

Assessment of challenges in patrol vehicles and with equipment among law enforcement officers

journal article published in 2023

Assessment of perceived traumatic injury hazards during drywall hanging

journal article published in 1999

Assessment of perceived traumatic injury hazards during drywall taping and sanding

journal article published in 2000

Association of anthropometric characteristics of law enforcement officers with perceived ratings of fit, comfort, and pain in the use of body armor

journal article published in 2023

Biomechanical evaluation of assistive devices for transferring residents

journal article published in 1999

Biomechanical evaluation of scaffolding tasks

journal article published in 1996

Biomechanical loading of shoulder joints during dynamic cart pushing tasks

conference proceedings item published in 2012

Biomechanical loading of the shoulder complex and lumbosacral joints during dynamic cart pushing task

journal article published in 2013

Body models of law enforcement officers for cruiser cab accommodation simulation

journal article published in 2022

Center for Occupational Robotics Research (superseded) ⬇️

superseded NIOSH program performance one-pager published in 2019

Comparing standing balance at real and virtual elevated environments

conference proceedings item published in 2002

Comparison of measured and self-reported anthropometric information among firefighters: implications and applications

journal article published in 2014

Constructing new harness fit charts using 3D anthropometric information ⬇️

conference proceedings item published in 2005

Control and perception of balance at elevated and sloped surfaces

journal article published in 2003

Development of improved harness sizing system ⬇️

abstract published in 2008

Development of sizing structure for fall arrest harness design

journal article published in 2009

Digital modeling of law enforcement officers: progress and challenges

conference proceedings item published in 2020

Digitization of farm tractors and body models for the evaluation of farm tractors ⬇️

conference proceedings item published in 2004

Effect of scaffold end frame carrying strategies on worker stepping response, postural stability, and perceived task difficulty

journal article published in 2008

Effectiveness of vertical visual reference for reducing postural instability on inclined and compliant surfaces at elevation

journal article published in 2009

Effects of aerial ladder rung spacing on firefighter climbing biomechanics

journal article published in 2020

Electroadhesion technology for extension ladder slip control ⬇️

conference proceedings item published in 2011

Encumbered and traditional anthropometry of law enforcement officers for vehicle workspace and protective equipment design

journal article published in 2021

Engineering and public health at CDC ⬇️

journal article in trade publication published in 2006

Engineering technologies in practice: the NIOSH experience ⬇️

journal article published in 2008

Ergonomic hazards and controls for elevating devices in construction ⬇️

chapter published in 2012

Evaluating technology and research knowledge gaps for prevention of falls from scaffolds

conference proceedings item published in 2008

Evaluating the protective capacity of two-post ROPS for a seat-belted occupant during a farm tractor overturn

journal article published in 2011

Evaluating the representativeness of the LANL respirator fit test panels for the current U.S. civilian workers ⬇️

conference abstract published in 2004

Evaluating the representativeness of the LANL respirator fit test panels for the current U.S. civilian workers ⬇️

journal article published in 2004

Evaluation of a "walk-through" ladder top design during ladder-roof transitioning tasks

journal article published in 2017

Evaluation of advanced curve speed warning system for fire trucks

journal article published in 2021

Evaluation of advanced curve speed warning system to prevent fire truck rollover crashes

journal article published in 2022

Evaluation of drywall hanging tasks using a questionnaire

abstract published in 1998

Evaluation of fall arrest harness sizing schemes

journal article published in 2007

Exoskeletons and Occupational Health Equity ⬇️

NIOSH Science Blog post published in 2020

Extension-ladder safety: solutions and knowledge gaps

journal article published in 2008

Factors affecting extension ladder angular positioning

journal article published in 2012

Fall prevention and protection: a public health matter

chapter published in 2016

Fall prevention and protection: principles, guidelines, and practices

book published in 2016

Fall prevention research and practice: a total worker safety approach

journal article published in 2014

Firefighter hand anthropometry and structural glove sizing: a new perspective

journal article published in 2015

Footwear effects on walking balance at elevation

journal article published in 2008

Footwear effects on workers' instability in a virtual roof workplace ⬇️

abstract published in 2005

Functional levels of floor surface roughness for the prevention of slips and falls: clean-and-dry and soapsuds-covered wet surfaces

journal article published in 2013

Global cooperation for prevention of STFs (slips, trips and falls)

publication published in 2014

Harness sizing and strap length configurations

journal article published in 2009

Health hazard evaluation report: HETA-92-0001-2444, SANCAP Abrasives, Inc., Alliance, Ohio ⬇️

field study published in 1994

Health hazard evaluation report: HETA-93-0531-2410, National Railroad Passenger Corporation, Chicago, Illinois ⬇️

field study published in 1994

Height effects in real and virtual environments

journal article published in 2005

Height, surface firmness, and visual reference effects on balance control

journal article published in 2001

Human responses to augmented virtual scaffolding models

journal article published in 2005

Identifying less stressful work methods: computer-aided simulation vs. human subject study

journal article published in 2000

Impact of harness fit on suspension tolerance

journal article published in 2012

Improving fall protection harness safety: contribution of 3-D scanning

conference proceedings item published in 2000

Injuries and ergonomic applications in construction

chapter published in 1996

Injury potential to a seat-belted operator during a rearward or sideward overturn of a ROPS-equipped farm tractor

conference abstract published in 2005

Interventions for preventing injuries in the construction industry

journal article published in 2007

Interventions to prevent injuries in construction workers

journal article published in 2012

Issues of wear and tear on the shoe heel surfaces and their effects on slip resistance performances ⬇️

conference proceedings item published in 2011

Laboratory evaluation of isometric strength associated with typical scaffold end frame disassembly postures

conference proceedings item published in 2000

Ladder Safety - development of the first NIOSH smartphone app ⬇️

abstract published in 2015

Ladder Safety: There's an App for That ⬇️

NIOSH Science Blog post published in 2013

Ladder safety innovations research at NIOSH

conference proceedings item published in 2008

Measurements of grip strength applied to cylindrical handles and the effect of gloves

conference proceedings item published in 2009

Multimodal indicator safety device for ladder positioning ⬇️

patent published in 2012

NIOSH - Center for Occupational Robotics Research: program, goals, and research ⬇️

abstract published in 2019

NIOSH Center for Motor Vehicle Safety: strategic plan for research and prevention, 2014-2018 ⬇️

NIOSH publication published in 2014

NIOSH Presents: An Occupational Safety and Health Perspective on Robotics Applications in the Workplace ⬇️

NIOSH Science Blog post published in 2017

NIOSH strategic goals to reduce fall injuries in the workplace ⬇️

conference proceedings item published in 2011

National Police Week and NIOSH's Work in Officer Safety ⬇️

NIOSH Science Blog post published in 2017

Needs and procedures for a national anthropometry study of law enforcement officers

journal article published in 2021

New NIOSH programs for preventing occupational traumatic injury

journal article published in 1997

Occupational injury prevention research in NIOSH

journal article published in 2010

Occupational safety and human factors

chapter published in 1998

Occupational traumatic injury prevention using virtual reality ⬇️

conference abstract published in 1997

One Size Does Not Fit All ⬇️

NIOSH Science Blog post published in 2015

Optimal hand locations for safe scaffold-end-frame disassembly

journal article published in 2002

Overexertion injuries among construction workers: research needs and priorities

abstract published in 1993

Physiological effects of back belt wearing during asymmetric lifting

journal article published in 2001

Plantar vibration effects on postural balance at elevation ⬇️

abstract published in 2008

Postural adaptation at elevated and sloped surfaces

conference abstract published in 2003

Postural stability effects of random vibration at the feet of construction workers in simulated elevation

journal article published in 2011

Preface to the special section on occupational fall prevention and protection

journal article published in 2012

Preventing emergency vehicle crashes: status and challenges of human factors issues

journal article published in 2018

Preventing falls from roofs: a critical review

journal article published in 2001

Psychophysical assessment of assistive devices for transferring patients/residents

journal article published in 2000

Quantitative assessment of human body shape using Fourier analysis

conference proceedings item published in 2004

Recapturing the sizing issues of respirator fit-test panels for emergency response ⬇️

conference abstract published in 2002

Research to improve extension ladder angular positioning

journal article published in 2013

Research-to-practice (r2p): moving science to solutions at NIOSH ⬇️

conference proceedings item published in 2006

Robotics in the workplace

chapter published in 2021

Safe work at elevation through virtual reality simulation

abstract published in 2000

Safety research in the 20th century - have we made a difference?

conference proceedings item published in 2000

Seat and seatbelt accommodation in fire apparatus: anthropometric aspects

journal article published in 2015

Selected movement and force pattern differences in rail- and rung-climbing of fire apparatus aerial ladders at 52.5 degree slope

journal article published in 2022

Sizing and fit of fall-protection harnesses

journal article published in 2003

Sizing firefighters: method and implications

journal article published in 2014

Suspension trauma and fall-arrest harness design

chapter published in 2016

Technologies for reducing fall risks associated with extension ladders

conference proceedings item published in 2006

The effect of wearing a back belt on spine kinematics during asymmetric lifting of large and small boxes ⬇️

journal article published in 2001

The effectiveness of interventions for preventing injuries in the construction industry - a systematic review

journal article published in 2008

The progress of occupational safety research: knowledge and gaps in safety research in the 20th century session

conference abstract published in 2000

Traumatic injury potential to seat-belted operator during a rearward overturn of a ROPS-equipped farm tractor

abstract published in 2003

Two new approaches for developing respirator fit-test panels representative of U.S. workers ⬇️

abstract published in 2002

U.S. truck driver anthropometric study and multivariate anthropometric models for cab designs

journal article published in 2012

Visual reference effect on balance control in roof work

abstract published in 2000

Paulina is supported by:

About Paulina

Help