Alignment Procedures for Micro-optics

All inkjet-printed electroactive polymer actuators for microfluidic lab-on-chip systems

All inkjet-printed piezoelectric polymer actuators: Characterization and applications for micropumps in lab-on-a-chip systems

Assembly processes comparison for a miniaturized laser used for the Exomars European Space Agency mission

Autoclaveable miniaturized video endoscopes with simplified flip-chip assembly

scientific article

Design and wafer-level replication of a freeform curvature for polymer-based electrostatic out-of-plane actuators

Development of a low cost high precision three-layer 3D artificial compound eye.

scientific article published in September 2013

Experimental investigations on the TMI thresholds of low-NA Yb-doped single-mode fibers

scientific article published in March 2018

Experimental validation of phase-only pre-compensation over 494  m free-space propagation.

scientific article

Freeform manufacturing of a microoptical lens array on a steep curved substrate by use of a voice coil fast tool servo

scientific article published in November 2011

Fully solution-processed organic light-emitting electrochemical cells (OLEC) with inkjet-printed micro-lenses for disposable lab-on-chip applications at ambient conditions

Handling of micro-optical components for microassembly

scholarly article published 19 April 2002

High-power tandem pumped fiber amplifier with an output power of 29 kW ⬇️

scientific article published on August 15, 2011

High-precision optomechanical lens system for space applications assembled by a local soldering technique

Hybrid micro-optical system integration by laserbeam soldering

Inkjet printed micropump actuator based on piezoelectric polymers: Device performance and morphology studies

Low-strain laser-based solder joining of mounted lenses

Method to simulate and analyse induced stresses for laser crystal packaging technologies

scientific article

Micro-optics soldering on multifunctional system platforms

New results of unimorph laser mirrors with screen printed actuator

Novel construction of a deformable mirror for laser beam shaping

Optimizing mode instability in low-NA fibers by passive strategies

scientific article

Optoelectronic packaging based on laser joining

Polymer-Based Pull-In Free Electrostatic Microactuators Fabricated on Wafer-Level

Precisely Assembled Multi Deflection Arrays – Key Components for Multi Shaped Beam Lithography

Process optimization of laser-based solderjet bumping for the mounting of optical components

Solder Bumping — A Flexible Joining Approach for the Precision Assembly of Optoelectronical Systems

Submicron accuracy optimization for laser beam soldering processes

Thermomechanical design, hybrid fabrication, and testing of a MOEMS deformable mirror

Waveguide image-slicers for ultrahigh resolution spectroscopy