Search filters

List of works by Valentim Adelino Ricardo Barão

Analysis of abstracts presented at the prosthodontic research section of IADR General Sessions 2004-2005: demographics, publication rates, and factors contributing to publication.

scientific article published on 31 October 2011

Assessment of treatment outcomes for facial prostheses in patients with craniofacial defects: A pilot retrospective study.

scientific article

Attachment of Porphyromonas gingivalis to corroded commercially pure titanium and titanium-aluminum-vanadium alloy

scientific article published on 20 January 2014

Authorship, collaboration, and funding trends in implantology literature: analysis of five journals from 2005 to 2009.

scientific article published in February 2011

Bond strength of denture teeth to acrylic resin: effect of thermocycling and polymerisation methods.

scientific article published on 5 March 2008

Clinical viability for immediate loading of dental implants: part II--treatment alternatives

scientific article published on 01 November 2009

Clinical viability of immediate loading of dental implants: part I--factors for success

scientific article published on 01 November 2009

Color degradation of acrylic resin denture teeth as a function of liquid diet: ultraviolet-visible reflection analysis

scientific article published on 01 October 2013

Color stability of maxillofacial prosthetic silicone functionalized with oxide nanocoating

scientific article published on 30 November 2018

Comparing the efficacy of mandibular implant-retained overdentures and conventional dentures among elderly edentulous patients: satisfaction and quality of life.

scientific article published in December 2007

Comparison between Plasma Electrolytic Oxidation Coating and Sandblasted Acid-Etched Surface Treatment: Histometric, Tomographic, and Expression Levels of Osteoclastogenic Factors in Osteoporotic Rats

scientific article published on 01 April 2020

Comparison between all-on-four and all-on-six treatment concepts and framework material on stress distribution in atrophic maxilla: A prototyping guided 3D-FEA study.

scientific article published on 21 July 2016

Comparison between complete denture and implant-retained overdenture: effect of different mucosa thickness and resiliency on stress distribution

scientific article published on 01 December 2008

Comparison of single-standing or connected implants on stress distribution in bone of mandibular overdentures: a two-dimensional finite element analysis

scientific article published on 01 May 2010

Comparison of stress distribution between complete denture and implant-retained overdenture-2D FEA.

scientific article published on 9 May 2008

Corrosion kinetics and topography analysis of Ti-6Al-4V alloy subjected to different mouthwash solutions.

scientific article published on 8 July 2014

Development of binary and ternary titanium alloys for dental implants.

scientific article published on August 2017

Dimensional precision of implant-supported frameworks fabricated by 3D printing

scientific article published on 25 March 2019

Discrepancies between Abstracts Presented at International Association for Dental Research Annual Sessions from 2004 to 2005 and Full-Text Publication ⬇️

scientific article published on February 22, 2012

Dose-response effect of chlorhexidine on a multispecies oral biofilm formed on pure titanium and on a titanium-zirconium alloy

scientific article published on 01 November 2018

Effect of Disinfection on the Bond Strength between Denture Teeth and Microwave-Cured Acrylic Resin Denture Base

scientific article

Effect of brushing and thermocycling on the shade and surface roughness of CAD-CAM ceramic restorations.

scientific article published on 29 September 2017

Effect of different mucosa thickness and resiliency on stress distribution of implant-retained overdentures-2D FEA.

scientific article published in November 2008

Effect of monomer treatment and polymerisation methods on the bond strength of resin teeth to denture base material.

scientific article published in September 2009

Effect of nonthermal plasma treatment on surface chemistry of commercially-pure titanium and shear bond strength to autopolymerizing acrylic resin

scientific article published on 7 November 2015

Effect of occlusal splint treatment on the temperature of different muscles in patients with TMD.

scientific article published on 29 June 2010

Effect of passive fit absence in the prosthesis/implant/retaining screw system: a two-dimensional finite element analysis

scientific article published on 01 November 2009

Effect of polymerization methods and thermal cycling on color stability of acrylic resin denture teeth.

scientific article published in December 2009

Effect of storage in artificial saliva and thermal cycling on Knoop hardness of resin denture teeth.

scientific article published on 17 January 2010

Effect of superstructure materials and misfit on stress distribution in a single implant-supported prosthesis: a finite element analysis

scientific article published on 01 May 2010

Effect of tyrosol on adhesion of Candida albicans and Candida glabrata to acrylic surfaces.

scientific article published on 10 July 2015

Effect of unilateral misfit on preload of retention screws of implant-supported prostheses submitted to mechanical cycling.

scientific article published on 8 June 2010

Effects of dextrose and lipopolysaccharide on the corrosion behavior of a Ti-6Al-4V alloy with a smooth surface or treated with double-acid-etching.

scientific article

Electrochemical behavior of bioactive coatings on cp-Ti surface for dental application

scientific article published on November 2015

Extracellular biofilm matrix leads to microbial dysbiosis and reduces biofilm susceptibility to antimicrobials on titanium biomaterial: An in vitro and in situ study

scientific article published on 07 September 2020

Factors to Achieve Aesthetics in All-Ceramic Restorations ⬇️

scientific article published on November 1, 2010

Finite element analysis to compare complete denture and implant-retained overdentures with different attachment systems

scientific article published on 01 July 2009

Fit and Stability of Screw-Retained Implant-Supported Frameworks Under Masticatory Simulation: Influence of Cylinder Type.

scientific article

Implant Volume Loss, Misfit, Screw Loosening, and Stress In Custom Titanium and Zirconia Abutments

scientific article published on 04 September 2020

Improving Polymethyl Methacrylate Resin Using a Novel Titanium Dioxide Coating

scientific article published on 20 February 2019

Incorporation of Ca, P, and Si on bioactive coatings produced by plasma electrolytic oxidation: The role of electrolyte concentration and treatment duration.

scientific article published on 7 December 2015

Influence of a light-activated glaze on the adhesion of Streptococcus sanguinis to the surface of polymers used in fabrication of interim prostheses

scientific article published on 02 September 2019

Influence of abutment type and esthetic veneering on preload maintenance of abutment screw of implant-supported crowns

scientific article published on 31 May 2013

Influence of abutment-to-fixture design on reliability and failure mode of all-ceramic crown systems

scientific article published on 06 February 2014

Influence of corrosion on lipopolysaccharide affinity for two different titanium materials.

scientific article published on 22 October 2013

Influence of spark erosion on the fit of screw-retained Co-Cr fixed complete denture frameworks veneered with different materials

scientific article published on 29 September 2017

Initial investigation of the corrosion stability of craniofacial implants.

scientific article published on 20 May 2017

Is there scientific evidence favoring the substitution of commercially pure titanium with titanium alloys for the manufacture of dental implants?

scientific article published on 18 October 2016

Long-term clinical evaluation of the color stability and stainability of acrylic resin denture teeth.

scientific article published on 7 April 2015

Marginal fit and photoelastic stress analysis of CAD-CAM and overcast 3-unit implant-supported frameworks

scientific article published on 22 September 2016

Non-linear 3D finite element analysis of full-arch implant-supported fixed dentures

scientific article published on 21 February 2014

Orbital Rehabilitation Implant-Retained: An Alternative to Adhesives Cutaneous Hypersensitivity.

scientific article

Passivity versus unilateral angular misfit: evaluation of stress distribution on implant-supported single crowns: three-dimensional finite element analysis

scientific article published on 01 November 2010

Preload evaluation of different screws in external hexagon joint.

scientific article published in February 2012

Production of a biofunctional titanium surface using plasma electrolytic oxidation and glow-discharge plasma for biomedical applications

scientific article published on 16 March 2016

Prosthetic platforms in implant dentistry.

scientific article

Proteome analysis of the salivary pellicle formed on titanium alloys containing niobium and zirconium

scientific article published on 01 February 2019

Proteomic profile of the saliva and plasma protein layer adsorbed on Ti-Zr alloy: the effect of sandblasted and acid-etched surface treatment

scientific article published on 26 May 2020

Should adhesive debonding be simulated for intra-radicular post stress analyses?

scientific article published on 23 June 2018

Surface analysis and shear bond strength of zirconia on resin cements after non-thermal plasma treatment and/or primer application for metallic alloys.

scientific article published on 24 November 2016

Surface treatment influences electrochemical stability of cpTi exposed to mouthwashes

scientific article published on 18 November 2015

Targeting Pathogenic Biofilms: Newly Developed Superhydrophobic Coating Favors a Host-Compatible Microbial Profile on the Titanium Surface

scientific article published on 24 February 2020

Teeth movement in denture and implant-supported prosthesis influenced by microwave flask systems

scientific article published on 15 July 2015

The effect of casting and masticatory simulation on strain and misfit of implant-supported metal frameworks.

scientific article published on 13 February 2016

The effect of mechanical cycling and different misfit levels on Vicker's microhardness of retention screws for single implant-supported prostheses

scientific article published on 31 August 2011

The influence of bone quality on the biomechanical behavior of full-arch implant-supported fixed prostheses

scientific article published on 11 January 2014

The role of nicotine, cotinine and caffeine on the electrochemical behavior and bacterial colonization to cp-Ti.

scientific article published on 14 June 2015

The role of superstructure material on the stress distribution in mandibular full-arch implant-supported fixed dentures. A CT-based 3D-FEA.

scientific article published on 31 October 2013

The role of welding techniques in the biomechanical behavior of implant-supported prostheses.

scientific article

The use of fragments of thin veneers as a restorative therapy for anterior teeth disharmony: a case report with 3 years of follow-up

scientific article published on 01 May 2012

Three-species biofilm model onto plasma-treated titanium implant surface.

scientific article

Titanium in dentistry: historical development, state of the art and future perspectives.

scientific article published on 20 October 2012

Titanium particles and ions favor dysbiosis in oral biofilms

scientific article published on 25 November 2019

Torque stability of different abutment screws submitted to mechanical cycling

scientific article published on 01 September 2013

Tribocorrosion behavior of biofunctional titanium oxide films produced by micro-arc oxidation: Synergism and mechanisms.

scientific article

Visible-Light-Induced Photocatalytic and Antibacterial Activity of TiO2 Codoped with Nitrogen and Bismuth: New Perspectives to Control Implant-Biofilm-Related Diseases

scientific article published on 09 May 2019

What is the role of lipopolysaccharide on the tribocorrosive behavior of titanium?

scientific article published on 20 November 2011

Paulina is supported by:

About Paulina

Help