Search filters

List of works by Rodrigo Souza

A Powdering Technique for Veneering Zirconia and Its Effect on the Flexural Strength of Ceramic Bilayers

scientific article published on 01 November 2018

A new silica-infiltrated Y-TZP obtained by the sol-gel method

scientific article published on 21 March 2016

Air–particle abrasion on zirconia ceramic using different protocols: Effects on biaxial flexural strength after cyclic loading, phase transformation and surface topography

scientific article published on 17 May 2013

Bacterial Colonization in the Marginal Region of Ceramic Restorations: Effects of Different Cement Removal Methods and Polishing.

scientific article

Bonding of Y-TZP to dentin: effects of Y-TZP surface conditioning, resin cement type, and aging.

scientific article published on 22 October 2013

Bonding of the Polymer Polyetheretherketone (PEEK) to Human Dentin: Effect of Surface Treatments

scientific article published on October 2016

CAD-FEA modeling and analysis of different full crown monolithic restorations

scientific article published on 20 June 2018

Can application of universal primers alone be a substitute for airborne-particle abrasion to improve adhesion of resin cement to zirconia?

scientific article published on April 2015

Can heat-pressed feldspathic ceramic be submitted to multiple heat-pressing?

scientific article published on 25 October 2018

Can the Application of Multi-Mode Adhesive be a Substitute to Silicatized/Silanized Y-TZP Ceramics?

scientific article published on 01 May 2018

Can the type of preheated resin composite influence the microtensile bond strength of ceramic restoration to human dentin?

scientific article published on 20 September 2021

Do Mechanical Advantages Exist in Relining Fiber Posts with Composite Prior to its Cementation?

scientific article published on 01 January 2018

Does TGF-β play a role in degenerative temporomandibular joint diseases? A systematic review

scientific article

Durability and Weibull Characteristics of Lithium Disilicate Crowns Bonded on Abutments with Knife-Edge and Large Chamfer Finish Lines after Cyclic Loading

scientific article published on 15 October 2014

Durability of microtensile bond to nonetched and etched feldspar ceramic: self-adhesive resin cements vs conventional resin

scientific article published on 01 April 2011

Effect of Adhesive Cementation Strategies on the Bonding of Y-TZP to Human Dentin.

scientific article published on 28 October 2015

Effect of Consecutive Firings on the Optical and Mechanical Properties of Silicate and Lithium Disilicate Based Glass-Ceramics

scientific article published on 15 December 2020

Effect of air-abrasion regimens and fine diamond bur grinding on flexural strength, Weibull modulus and phase transformation of zirconium dioxide.

scientific article published on 18 September 2015

Effect of different bonding protocols on degree of monomer conversion and bond strength between orthodontic brackets and enamel

scientific article published on 11 June 2018

Effect of different loading pistons on stress distribution of a CAD/CAM silica-based ceramic: CAD-FEA modeling and fatigue survival analysis

scientific article published on 15 March 2019

Effect of different surface treatments and multimode adhesive application on the Weibull characteristics, wettability, surface topography and adhesion to CAD/CAM lithium disilicate ceramic

scientific article published on 27 November 2020

Effect of extrinsic pigmentation and surface treatments on biaxial flexure strength after cyclic loading of a translucent ZrO2 ceramic

scientific article published on 29 September 2019

Effect of glazing application side and mechanical cycling on the biaxial flexural strength and Weibull characteristics of a Y-TZP ceramic

scientific article published on 28 September 2020

Effect of hydrofluoric acid concentration and etching time on resin-bond strength to different glass ceramics

scientific article published on 16 May 2019

Effect of intra-oral aging on t→m phase transformation, microstructure, and mechanical properties of Y-TZP dental ceramics.

scientific article published on 13 April 2017

Effect of primer-cement systems with different functional phosphate monomers on the adhesion of zirconia to dentin

scientific article published on 07 August 2018

Effect of sodium ascorbate and the time lapse before cementation after internal bleaching on bond strength between dentin and ceramic.

scientific article published on 25 February 2010

Effects of aging procedures on the topographic surface, structural stability, and mechanical strength of a ZrO2-based dental ceramic.

scientific article published on 22 September 2014

Effects of cement-curing mode and light-curing unit on the bond durability of ceramic cemented to dentin.

scientific article published in March 2013

Fracture Strength, Failure Types, and Weibull Characteristics of Three-Unit Zirconia Fixed Dental Prostheses After Cyclic Loading: Effects of Veneering and Air-Abrasion Protocols

scientific article published on November 2016

Hydrofluoric acid concentration, time and use of phosphoric acid on the bond strength of feldspathic ceramics

scientific article published on 16 March 2020

Influence of Acid Etching and Universal Adhesives on the Bond Strength to Dentin

scientific article published on 01 June 2020

Influence of Alveolar Bone Loss and Cement Layer Thickness on the Biomechanical Behavior of Endodontically Treated Maxillary Incisors: A 3-dimensional Finite Element Analysis

scientific article published on 23 March 2017

Influence of air-particle deposition protocols on the surface topography and adhesion of resin cement to zirconia

scientific article published on 31 October 2013

Influence of surface treatment on the shear bond strength of ceramics fused to cobalt-chromium.

scientific article

Interfacial Properties and Bottom/Top Hardness Ratio Produced by Bulk Fill Composites in Dentin Cavities

scientific article published on 07 October 2019

Low-temperature degradation of a Y-TZP ceramic after surface treatments

scientific article published on 16 September 2013

Marginal and internal discrepancies of zirconia copings: effects of milling system and finish line design

scientific article published on January 2015

Mechanical and thermal cycling effects on the flexural strength of glass ceramics fused to titanium

scientific article published on 01 January 2008

Monoclinic phase transformation and mechanical durability of zirconia ceramic after fatigue and autoclave aging

scientific article published on 17 June 2016

Opaque layer firing temperature and aging effect on the flexural strength of ceramic fused to cobalt-chromium alloy.

scientific article published on 28 April 2010

Short communication: Influence of retainer configuration and loading direction on the stress distribution of lithium disilicate resin-bonded fixed dental prostheses: 3D finite element analysis

scientific article published on 05 August 2019

Surface Treatments of Zirconia to Enhance Bonding Durability

scientific article published on 07 July 2015

The effect of air-particle abrasion and a zirconia primer application on resin cement bonding strength to zirconia

scientific article published on 01 April 2019

Ultrathin Monolithic Zirconia Veneers: Reality or Future? Report of a Clinical Case and One-year Follow-up

scientific article

Y-TZP surface behavior under two different milling systems and three different accelerated aging protocols

scientific article published on 01 December 2018

Paulina is supported by:

About Paulina

Help