List of works - Harry van Lenthe

3D characterization of bone strains in the rat tibia loading model.

scientific article published on 18 June 2011

A fast convolution-based methodology to simulate 2-D/3-D cardiac ultrasound images.

scientific article published in February 2009

A finite element beam-model for efficient simulation of large-scale porous structures.

scientific article published in February 2004

A novel in silico method to quantify primary stability of screws in trabecular bone.

scientific article published on 27 February 2017

A novel in vivo mouse model for mechanically stimulated bone adaptation--a combined experimental and computational validation study.

scientific article published in October 2008

A novel method for segmenting and aligning the pre- and post-implantation scaffolds of resorbable calcium-phosphate bone substitutes.

scientific article published on 2 March 2017

A μCT-based investigation of the influence of tissue modulus variation, anisotropy and inhomogeneity on ultrasound propagation in trabecular bone

scientific article published on 3 March 2016

Abnormal bone microarchitecture and evidence of osteoblast dysfunction in premenopausal women with idiopathic osteoporosis

scientific article

Accuracy and reproducibility of mouse cortical bone microporosity as quantified by desktop microcomputed tomography

scientific article published on 10 August 2017

Age-related changes in female mouse cortical bone microporosity

scientific article published on 05 May 2018

Aging does not change the compressive stiffness of mandibular condylar cartilage in horses

scientific article published on 23 August 2018

Aging, Osteocytes, and Mechanotransduction.

scientific article published on 11 September 2017

Androgen Receptor in Neurons Slows Age-Related Cortical Thinning in Male Mice

scientific article published on 15 January 2019

Assessing forearm fracture risk in postmenopausal women

scientific article

Assessment of trabecular and cortical architecture and mechanical competence of bone by high-resolution peripheral computed tomography: comparison with transiliac bone biopsy

scientific article

Augmentation of peri-implant bone improves implant stability: quantification using simulated bone loss

scientific article published on 18 August 2011

Bone morphometry strongly predicts cortical bone stiffness and strength, but not toughness, in inbred mouse models of high and low bone mass

scientific article published on 01 August 2008

Bone structure at the distal radius during adolescent growth

scientific article published on June 2009

Comparison of optical coherence tomography, microcomputed tomography, and histology at a three-dimensionally imaged trabecular bone sample.

scientific article published in July 2010

Computational analyses of small endosseous implants in osteoporotic bone.

scientific article published on 21 July 2010

Computational analysis of primary implant stability in trabecular bone

scientific article published on 29 December 2014

Computational finite element bone mechanics accurately predicts mechanical competence in the human radius of an elderly population.

scientific article

Computer-based automatic classification of trabecular bone pattern can assist radiographic bone quality assessment at dental implant site

scientific article published on 17 September 2018

Correlation Between Cone-Beam Computed Tomography and High-Resolution Peripheral Computed Tomography for Assessment of Wrist Bone Microstructure

scientific article published on 26 March 2019

Correlation between pre-operative periprosthetic bone density and post-operative bone loss in THA can be explained by strain-adaptive remodelling

scientific article published on 01 July 1999

Differential effects of bone structural and material properties on bone competence in C57BL/6 and C3H/He inbred strains of mice.

scientific article published on 11 June 2008

Differential regulation of bone and body composition in male mice with combined inactivation of androgen and estrogen receptor-alpha.

scientific article published on 22 September 2008

Diffusion of charged and uncharged contrast agents in equine mandibular condylar cartilage is not affected by an increased level of sugar-induced collagen crosslinking

scientific article published on 14 October 2018

Effect of anatomical variability on stress-shielding induced by short calcar-guided stems: Automated finite element analysis of 90 femora

scientific article published on 28 February 2019

Engineering craniofacial scaffolds.

scientific article published in August 2005

Ex vivo thickness measurement of cartilage covering the temporomandibular joint.

scientific article published on 19 December 2016

Experimental and finite element analysis of the mouse caudal vertebrae loading model: prediction of cortical and trabecular bone adaptation.

scientific article published on 7 April 2011

Fast and accurate specimen-specific simulation of trabecular bone elastic modulus using novel beam-shell finite element models.

scientific article published on 16 March 2011

Femoral stiffness and strength critically depend on loading angle: a parametric study in a mouse-inbred strain.

scientific article

Frictional heating of total hip implants. Part 1: measurements in patients.

scientific article

Frictional heating of total hip implants. Part 2: finite element study

scientific article published on 01 April 2001

From histology to micro-CT: Measuring and modeling resorption cavities and their relation to bone competence

scientific article

Glucocorticoid-Induced Changes in the Geometry of Osteoclast Resorption Cavities Affect Trabecular Bone Stiffness

scientific article published on 28 November 2012

High-throughput quantification of the mechanical competence of murine femora--a highly automated approach for large-scale genetic studies

scientific article published on 26 February 2013

Homogenized finite element models can accurately predict screw pull-out in continuum materials, but not in porous materials

scientific article published on 07 February 2021

How morphology predicts mechanical properties of trabecular structures depends on intra-specimen trabecular thickness variations

scientific article published on 01 September 2002

Hydroxyapatite particles maintain peri-implant bone mantle during osseointegration in osteoporotic bone

scientific article published on 11 August 2009

Implant stability is affected by local bone microstructural quality

scientific article published on 13 May 2011

Importance of individual rods and plates in the assessment of bone quality and their contribution to bone stiffness.

scientific article published on 5 April 2006

In vivo assessment of the effect of controlled high- and low-frequency mechanical loading on peri-implant bone healing

scientific article

In vivo behavior of calcium phosphate scaffolds with four different pore sizes

scientific article published on 21 June 2006

Increase in bone volume fraction precedes architectural adaptation in growing bone

scientific article published on 01 June 2001

Integration of cortical thickness data in a statistical shape model of the scapula

scientific article published on 04 May 2020

Load sharing and ligament strains in balanced, overstuffed and understuffed UKA. A validated finite element analysis

scientific article published on 25 January 2014

Local delivery of bisphosphonate from coated orthopedic implants increases implants mechanical stability in osteoporotic rats.

scientific article published in January 2006

Mechanical Loading Differentially Affects Osteocytes in Fibulae from Lactating Mice Compared to Osteocytes in Virgin Mice: Possible Role for Lacuna Size

scientific article published on 14 August 2018

Mechanical and morphological characterization of PMMA/bone composites in human femoral heads

scientific article published on 06 December 2020

Mechanical competence of ovariectomy-induced compromised bone after single or combined treatment with high-frequency loading and bisphosphonates

scientific article published on June 2015

Mechanical stability in a human radius fracture treated with a novel tissue-engineered bone substitute: a non-invasive, longitudinal assessment using high-resolution pQCT in combination with finite element analysis

scientific article published on 08 September 2010

Mechanical stiffness of TMJ condylar cartilage increases after artificial aging by ribose.

scientific article published on 16 December 2017

Mechanisms of reduced implant stability in osteoporotic bone

scientific article published on 12 May 2011

Multi-level patient-specific modelling of the proximal femur. A promising tool to quantify the effect of osteoporosis treatment.

scientific article published on May 2009

Nondestructive micro-computed tomography for biological imaging and quantification of scaffold-bone interaction in vivo.

scientific article published on 10 January 2007

Patient-specific in silico models can quantify primary implant stability in elderly human bone.

scientific article published on 6 September 2017

Pedicled vascularized rib transfer for reconstruction of clavicle nonunions with bony defects: anatomical and biomechanical considerations.

scientific article

Positive association between serum silicon levels and bone mineral density in female rats following oral silicon supplementation with monomethylsilanetriol.

scientific article

Prediction of failure load using micro-finite element analysis models: Toward in vivo strength assessment.

scientific article published in January 2006

Quantification of bone microstructure in the wrist using cone-beam computed tomography

scientific article published on 15 June 2018

Quantification of trabecular spatial orientation from low-resolution images.

scientific article published on 2 May 2014

Quantifying thumb opposition kinematics using dynamic computed tomography.

scientific article published on 11 May 2016

Quantitative, structural, and image-based mechanical analysis of nonunion fracture repaired by genetically engineered mesenchymal stem cells.

scientific article

Reply Letter to the Editor: Clinical in Vivo Assessment of Bone Microarchitecture With CT Scanners: An Enduring Challenge

scientific article published on 05 December 2019

Role of subject-specific musculoskeletal loading on the prediction of bone density distribution in the proximal femur.

scientific article

Screw insertion in trabecular bone causes peri-implant bone damage

scientific article published on 23 February 2016

Sexual dimorphism in cortical bone size and strength but not density is determined by independent and time-specific actions of sex steroids and IGF-1: evidence from pubertal mouse models.

scientific article published in March 2010

Specimen-specific beam models for fast and accurate prediction of human trabecular bone mechanical properties.

scientific article published in September 2006

Speed of sound reflects Young's modulus as assessed by microstructural finite element analysis

scientific article published on 01 May 2000

Stress shielding after total knee replacement may cause bone resorption in the distal femur

scientific article published on 01 January 1997

Subject-specific bone loading estimation in the human distal radius.

scientific article published on 20 December 2012

Synthesis and characterization of porous β-tricalcium phosphate blocks

scientific article published on 01 November 2005

Technical Note: Cortical thickness and density estimation from clinical CT using a prior thickness-density relationship.

scientific article

The different contributions of cortical and trabecular bone to implant anchorage in a human vertebra

scientific article published on 10 December 2011

The discrete nature of trabecular bone microarchitecture affects implant stability

scientific article published on 28 January 2012

The importance of murine cortical bone microstructure for microcrack initiation and propagation

scientific article published on 22 August 2011

The influence of surface coatings of dicalcium phosphate (DCPD) and growth and differentiation factor-5 (GDF-5) on the stability of titanium implants in vivo.

scientific article published on 3 April 2006

Time-lapsed assessment of microcrack initiation and propagation in murine cortical bone at submicrometer resolution

scientific article published on 03 May 2009

Tissue modulus calculated from beam theory is biased by bone size and geometry: implications for the use of three-point bending tests to determine bone tissue modulus.

scientific article published on 27 June 2008

Towards validation of computational analyses of peri-implant displacements by means of experimentally obtained displacement maps.

scientific article published in February 2011

Trabecular bone failure at the microstructural level.

scientific article published on June 2006

Transmission of whole-body vibration and its effect on muscle activation.

scientific article published in September 2013

Unraveling the compromised biomechanical performance of type 2 diabetes- and Roux-en-Y gastric bypass bone by linking mechanical-structural and physico-chemical properties.

scientific article published on 12 April 2018

List of works by Harry van Lenthe

3D characterization of bone strains in the rat tibia loading model.

A fast convolution-based methodology to simulate 2-D/3-D cardiac ultrasound images.

A finite element beam-model for efficient simulation of large-scale porous structures.

A novel in silico method to quantify primary stability of screws in trabecular bone.

A novel in vivo mouse model for mechanically stimulated bone adaptation--a combined experimental and computational validation study.

A novel method for segmenting and aligning the pre- and post-implantation scaffolds of resorbable calcium-phosphate bone substitutes.

A μCT-based investigation of the influence of tissue modulus variation, anisotropy and inhomogeneity on ultrasound propagation in trabecular bone

Abnormal bone microarchitecture and evidence of osteoblast dysfunction in premenopausal women with idiopathic osteoporosis

Accuracy and reproducibility of mouse cortical bone microporosity as quantified by desktop microcomputed tomography

Age-related changes in female mouse cortical bone microporosity

Aging does not change the compressive stiffness of mandibular condylar cartilage in horses

Aging, Osteocytes, and Mechanotransduction.

Androgen Receptor in Neurons Slows Age-Related Cortical Thinning in Male Mice

Assessing forearm fracture risk in postmenopausal women

Assessment of trabecular and cortical architecture and mechanical competence of bone by high-resolution peripheral computed tomography: comparison with transiliac bone biopsy

Augmentation of peri-implant bone improves implant stability: quantification using simulated bone loss

Bone morphometry strongly predicts cortical bone stiffness and strength, but not toughness, in inbred mouse models of high and low bone mass

Bone structure at the distal radius during adolescent growth

Comparison of optical coherence tomography, microcomputed tomography, and histology at a three-dimensionally imaged trabecular bone sample.

Computational analyses of small endosseous implants in osteoporotic bone.

Computational analysis of primary implant stability in trabecular bone

Computational finite element bone mechanics accurately predicts mechanical competence in the human radius of an elderly population.

Computer-based automatic classification of trabecular bone pattern can assist radiographic bone quality assessment at dental implant site

Correlation Between Cone-Beam Computed Tomography and High-Resolution Peripheral Computed Tomography for Assessment of Wrist Bone Microstructure

Correlation between pre-operative periprosthetic bone density and post-operative bone loss in THA can be explained by strain-adaptive remodelling

Differential effects of bone structural and material properties on bone competence in C57BL/6 and C3H/He inbred strains of mice.

Differential regulation of bone and body composition in male mice with combined inactivation of androgen and estrogen receptor-alpha.

Diffusion of charged and uncharged contrast agents in equine mandibular condylar cartilage is not affected by an increased level of sugar-induced collagen crosslinking

Effect of anatomical variability on stress-shielding induced by short calcar-guided stems: Automated finite element analysis of 90 femora

Engineering craniofacial scaffolds.

Ex vivo thickness measurement of cartilage covering the temporomandibular joint.

Experimental and finite element analysis of the mouse caudal vertebrae loading model: prediction of cortical and trabecular bone adaptation.

Fast and accurate specimen-specific simulation of trabecular bone elastic modulus using novel beam-shell finite element models.

Femoral stiffness and strength critically depend on loading angle: a parametric study in a mouse-inbred strain.

Frictional heating of total hip implants. Part 1: measurements in patients.

Frictional heating of total hip implants. Part 2: finite element study

From histology to micro-CT: Measuring and modeling resorption cavities and their relation to bone competence

Glucocorticoid-Induced Changes in the Geometry of Osteoclast Resorption Cavities Affect Trabecular Bone Stiffness

High-throughput quantification of the mechanical competence of murine femora--a highly automated approach for large-scale genetic studies

Homogenized finite element models can accurately predict screw pull-out in continuum materials, but not in porous materials

How morphology predicts mechanical properties of trabecular structures depends on intra-specimen trabecular thickness variations

Hydroxyapatite particles maintain peri-implant bone mantle during osseointegration in osteoporotic bone

Implant stability is affected by local bone microstructural quality

Importance of individual rods and plates in the assessment of bone quality and their contribution to bone stiffness.

In vivo assessment of the effect of controlled high- and low-frequency mechanical loading on peri-implant bone healing

In vivo behavior of calcium phosphate scaffolds with four different pore sizes

Increase in bone volume fraction precedes architectural adaptation in growing bone

Integration of cortical thickness data in a statistical shape model of the scapula

Load sharing and ligament strains in balanced, overstuffed and understuffed UKA. A validated finite element analysis

Local delivery of bisphosphonate from coated orthopedic implants increases implants mechanical stability in osteoporotic rats.

Mechanical Loading Differentially Affects Osteocytes in Fibulae from Lactating Mice Compared to Osteocytes in Virgin Mice: Possible Role for Lacuna Size

Mechanical and morphological characterization of PMMA/bone composites in human femoral heads

Mechanical competence of ovariectomy-induced compromised bone after single or combined treatment with high-frequency loading and bisphosphonates

Mechanical stability in a human radius fracture treated with a novel tissue-engineered bone substitute: a non-invasive, longitudinal assessment using high-resolution pQCT in combination with finite element analysis

Mechanical stiffness of TMJ condylar cartilage increases after artificial aging by ribose.

Mechanisms of reduced implant stability in osteoporotic bone

Multi-level patient-specific modelling of the proximal femur. A promising tool to quantify the effect of osteoporosis treatment.

Nondestructive micro-computed tomography for biological imaging and quantification of scaffold-bone interaction in vivo.

Patient-specific in silico models can quantify primary implant stability in elderly human bone.

Pedicled vascularized rib transfer for reconstruction of clavicle nonunions with bony defects: anatomical and biomechanical considerations.

Positive association between serum silicon levels and bone mineral density in female rats following oral silicon supplementation with monomethylsilanetriol.

Prediction of failure load using micro-finite element analysis models: Toward in vivo strength assessment.

Quantification of bone microstructure in the wrist using cone-beam computed tomography

Quantification of trabecular spatial orientation from low-resolution images.

Quantifying thumb opposition kinematics using dynamic computed tomography.

Quantitative, structural, and image-based mechanical analysis of nonunion fracture repaired by genetically engineered mesenchymal stem cells.

Reply Letter to the Editor: Clinical in Vivo Assessment of Bone Microarchitecture With CT Scanners: An Enduring Challenge

Role of subject-specific musculoskeletal loading on the prediction of bone density distribution in the proximal femur.

Screw insertion in trabecular bone causes peri-implant bone damage

Sexual dimorphism in cortical bone size and strength but not density is determined by independent and time-specific actions of sex steroids and IGF-1: evidence from pubertal mouse models.

Specimen-specific beam models for fast and accurate prediction of human trabecular bone mechanical properties.

Speed of sound reflects Young's modulus as assessed by microstructural finite element analysis

Stress shielding after total knee replacement may cause bone resorption in the distal femur

Subject-specific bone loading estimation in the human distal radius.

Synthesis and characterization of porous β-tricalcium phosphate blocks

Technical Note: Cortical thickness and density estimation from clinical CT using a prior thickness-density relationship.

The different contributions of cortical and trabecular bone to implant anchorage in a human vertebra

The discrete nature of trabecular bone microarchitecture affects implant stability

The importance of murine cortical bone microstructure for microcrack initiation and propagation