Search filters

List of works by Bean T. Chen

A field study on the respiratory deposition of the nano-sized fraction of mild and stainless steel welding fume metals

journal article published in 2015

A novel method for assessing respiratory deposition of welding fume nanoparticles

journal article published in 2014

A numerical study of the performance of an aerosol sampler with a curved, blunt, multi-orificed inlet

journal article published in 2002

A two-stage cyclone personal aerosol sampler using microcentrifuge tubes for bioaerosol collection

abstract published in 2006

A two-stage cyclone using microcentrifuge tubes for personal bioaerosol sampling

journal article published in 2006

Acute effect of stainless steel welding fume inhalation on lung injury, inflammation, and defense responses

abstract published in 2006

Acute in vitro and in vivo toxicity of a commercial grade boron nitride nanotube mixture

journal article published in 2017

Acute pulmonary dose-responses to inhaled multi-walled carbon nanotubes

journal article published in 2013

Acute pulmonary responses to MWCNT inhalation

abstract published in 2011

Aerosol characterization and pulmonary responses after short-term inhalation of fumes generated during resistance spot welding of galvanized steel

abstract published in 2017

Aerosol characterization and pulmonary responses in rats after short-term inhalation of fumes generated during resistance spot welding of galvanized steel

journal article published in 2017

Aerosol sampler calibration

book published in 2008

Aerosol sampler calibration

chapter published in 2001

Aerosolization of single-walled carbon nanotubes for an inhalation study

journal article published in 2008

Alterations in lung host defense after pulmonary exposure to silver nanoparticles in rats

abstract published in 2013

Alterations in welding process parameters change particle characteristics and influence lung responses

abstract published in 2010

Alterations in welding process voltage affect the generation of ultrafine particles, fume composition, and pulmonary toxicity

scientific article published on February 1, 2011

Animal inhalation exposure to nanomaterials: design, conduct, and data interpretation

abstract published in 2016

Assessment of pulmonary fibrogenic potential of multiwalled carbon nanotubes in human lung cells

journal article published in 2012

Automated aerosolization, dispersion, and concentration control of silica powder for use in inhalation exposure studies

abstract published in 2010

Bioaerosol sampling for the detection of aerosolized influenza virus

journal article published in 2007

Blood gene expression profiling detects silica exposure and toxicity

journal article published in 2011

Bridging the gap between exposure assessment and inhalation toxicology: some insights from the carbon nanotube experience

journal article published in 2016

Calcium-dependent vasodilation is impaired in coronary arterioles after nanoparticle inhalation

abstract published in 2009

Calibration of aerosol instruments

chapter published in 2011

Carbon nanotube dosimetry: from workplace exposure assessment to inhalation toxicology

journal article published in 2013

Carbon nanotube dosimetry: from workplace exposure assessment to inhalation toxicology

abstract published in 2013

Chamber evaluation of a personal, bioaerosol cyclone sampler

journal article published in 2008

Characterization of chemical contaminants generated by a desktop fused deposition modeling 3-dimensional printer

journal article published in 2017

Characterization of welding aerosols generated by resistance spot welding

abstract published in 2011

CoO and La2O3 nanoparticle-induced pulmonary response in mice after whole-body inhalation exposure

abstract published in 2016

CoO and La2O3 nanoparticle-induced pulmonary response in mice after whole-body inhalation exposure

abstract published in February 2016

Comparison of inhaled dose vs. postexposure time period in silica-induced pulmonary toxicity in the rats

abstract published in 2015

Comparison of quantitative airborne fungi measurements by active and passive sampling methods

journal article published in 2011

Comparison of stainless and mild steel welding fumes in generation of reactive oxygen species

scientific article published on November 3, 2010

Comparison of three methods to convert Chinese mining dust exposure into respirable fraction

abstract published in 1998

Computer controlled multi-walled carbon nanotube inhalation exposure system

journal article published in 2009

Computer-automated silica aerosol generator and animal inhalation exposure system

journal article published in 2013

Design and characterization of a nanoparticle aerosol generator

abstract published in 2012

Design and use of a settling chamber for sampler evaluation under calm-air conditions

journal article published in 2003

Design, construction, and characterization of a novel robotic welding fume generator and inhalation exposure system for laboratory animals

journal article published in 2006

Determination of unique microbial volatile organic compounds produced by five Aspergillus species commonly found in problem buildings

journal article published in 2002

Development and characterization of a resistance spot welding aerosol generator and inhalation exposure system

journal article published in 2014

Development of a cyclone-based aerosol sampler with recirculating liquid film: theory and experiment

journal article published in 2006

Development of a fungus-specific PCR assay for detecting low-level fungi in an indoor environment

journal article published in 2000

Development of a personal sampler for collecting fungal spores

journal article published in 2004

Development of a small inhalation system for rodent exposure to fine and ultrafine titanium dioxide aerosols

abstract published in 2006

Development of an inhalation exposure system for resistance spot welding using an anti-spatter spray

abstract published in 2015

Differential pulmonary effects of CoO and La2O3 metal oxide nanoparticle responses during aerosolized inhalation in mice

journal article published in 2016

Direct interaction between multiwalled carbon nanotubes and the coronary microcirculation

abstract published in 2013

Direct-on-filter analysis of crystalline silica using photoacoustic fourier transform-infared spectroscopy

journal article published in 2002

Dispersion of single-walled carbon nanotubes by a natural lung surfactant for pulmonary in vitro and in vivo toxicity studies

journal article published in 2010

Dispersion status of single walled carbon nanotubes is a key determinant of their biological activities

abstract published in 2010

Distribution of airborne influenza virus and respiratory syncytial virus in an urgent care medical clinic

journal article published in 2010

Dopaminergic neurotoxicity following pulmonary exposure to manganese-containing welding fumes

journal article published in 2010

Dose response of multi-walled carbon nanotube-induced lung tumors

abstract published in 2017

Effect of diet-induced obesity on silica-induced pulmonary toxicity in rats

abstract published in 2017

Effect of inhalation of gas metal ARC stainless steel welding fume on mouse lung inflammation and tumorigenesis

abstract published in 2010

Effect of metal composition and the use of adhesive and anti-spatter chemicals on lung responses in rats after inhalation during spot welding

abstract published in 2015

Effect of short-term stainless steel welding fume inhalation exposure on lung inflammation, injury, and defense responses in rats

journal article published in 2007

Effects of Titanium Dioxide Nanoparticle Exposure on Neuroimmune Responses in Rat Airways

scientific article published on January 1, 2010

Effects of inhalation of gas metal arc-stainless steel welding fume on systemic inflammation and atherosclerosis

abstract published in 2010

Effects of multiwalled carbon nanotube coincubation on vascular reactivity and nitric oxide (NO) availablility

abstract published in 2012

Effects on pulmonary host defense following acute exposure to diesel emission particulate and crystalline silica in combination

abstract published in 2017

Emission of particulate matter from a desktop three-dimensional (3D) printer

journal article published in 2016

Estimating historical respirable crystalline silica exposures for Chinese pottery workers and iron/copper, tin, and tungsten miners

scientific article published on November 1, 2001

Evaluation of PCR interference from dust samples for monitoring indoor environments

abstract published in 2002

Evaluation of interference to conventional and real-time PCR for detection and quantification of fungi in dust

journal article published in 2005

Evaluation of physical sampling efficiency for cyclone-based personal bioaerosol samplers in moving air environments

scientific article published on July 26, 2012

Evaluation of sampling methods for toxicological testing of indoor air particulate matter

journal article published in 2016

Evolution of Welding-Fume Aerosols with Time and Distance from the Source: A study was conducted on the spatiotemporal variability in welding-fume concentrations for the characterization of first- and second-hand exposure to welding fumes

journal article published in 2016

Exposure to silica and silicosis among tin miners in China: exposure response analyses and risk assessment

journal article published in 2001

Exposure to titanium dioxide (TiO2) nanoparticles increases airway reactivity and neurogenic inflammation in rodent lungs

abstract published in 2010

Exposure to titanium dioxide (TiO2) nanoparticles up-regulates neurotrophin expression in rodent airways

abstract published in 2009

Exposures and cross-shift lung function declines in wildland firefighters

journal article published in 2014

Field evaluation of a personal, bioaerosol cyclone sampler

journal article published in 2008

Field evaluation of personal sampling methods for multiple bioaerosols

journal article published in 2015

Hexavalent chromium content in stainless steel welding fumes is dependent on the welding process and shield gas type

journal article published in 2009

Impairment of coronary arteriolar endothelium-dependent dilation after multi-walled carbon nanotube inhalation: a time-course study

journal article published in 2012

Inhalation exposure of gas-metal arc stainless steel welding fume increased atherosclerotic lesions in apolipoprotein E knockout mice

journal article published in 2011

Inhalation of a spot welding aerosol using an adhesive increased airway resistance but not lung inflammation

abstract published in 2013

Inhalation of stainless steel welding fume results in dissimilar inflammatory responses in the lungs of A/J and C57BL/6J mice

abstract published in 2008

Inhalation of ultrafine titanium dioxide augments particle-dependent microvascular dysfunction

abstract published in 2007

Inhalation vs. aspiration of single-walled carbon nanotubes in C57BL/6 mice: inflammation, fibrosis, oxidative stress, and mutagenesis

journal article published in 2008

Innovations in methodologies for inhalation exposure and interpretations of in vivo toxicity

abstract published in 2014

Instrument calibration

chapter published in 2001

Interferon signaling, systemic inflammation, and atherosclerosis following welding fume inhalation exposure: from the lung to the blood to the vasculature

abstract published in 2011

Intratracheal coexposure to diesel exhaust particulate and crystalline silica in rats potentiates the inflammatory effects of silica in the lungs

abstract published in 2014

LTAS.NET: a NIOSH Life Table Analysis System for the windows environment

abstract published in 2005

Laboratory evaluation of a field-portable sealed source x-ray fluorescence spectrometer for determination of metals in air filter samples

journal article published in 2009

Lack of lung tumor promotion after inhalation of a copper-nickel welding fume in A/J mice

abstract published in 2019

Lung bioactivity of vapor grown carbon nanofibers

journal article published in 2017

Lung toxicity and allergy responses in mice exposed to nanoparticle silver

abstract published in 2015

Measurement of airborne influenza virus in a hospital emergency department

journal article published in 2009

Measurement of airborne nanoparticle surface area using a filter-based gas adsorption method for inhalation toxicology experiments

journal article published in 2011

Measurements of airborne influenza in a healthcare facility

abstract published in 2008

Measurements of influenza virus RNA in cough-generated aerosols

abstract published in 2010

Measuring surface area of airborne titanium dioxide powder agglomerates: relationships between gas adsorption, diffusion and mobility-based methods

journal article published in 2011

Mechanistic links between the lung and the systemic microcirculation after nanoparticle exposure

abstract published in 2009

Metal arc welding hazard reduction by selection of the best combination of shield gas and metal transfer mode

abstract published in 2011

Mild steel welding fume causes manganese accumulation and subtle neuroinflammatory changes but not overt neuronal damage in discrete brain regions of rats after short-term inhalation exposure

journal article published in 2009

Modifying welding process parameters can reduce the neurotoxic potential of manganese-containing welding fumes

journal article published in 2015

Molecular insights into the progression of crystalline silica-induced pulmonary toxicity in rats

journal article published in 2013

Molecular mechanisms of pulmonary response progression in crystalline silica exposed rats

journal article published in 2017

Molecular responses to MWCNT pulmonary exposure at relevant workplace exposure levels

abstract published in 2014

Mouse pulmonary dose- and time course-responses induced by exposure to nitrogen-doped multi-walled carbon nanotubes

abstract published in 2018

Mouse pulmonary dose- and time course-responses induced by exposure to nitrogen-doped multi-walled carbon nanotubes

journal article published in 2020

Multi-walled carbon nanotubes: sampling criteria and aerosol characterization

journal article published in 2012

Multiwalled carbon nanotube-induced lung tumors

abstract published in 2013

Nanoparticle inhalation alters systemic arteriolar vasoreactivity through sympathetic and cyclooxygenase-mediated pathways

journal article published in 2012

Nanoparticle inhalation augments particle-dependent systemic microvascular dysfunction

journal article published in 2008

Nanoparticle inhalation impairs coronary microvascular reactivity via a local reactive oxygen species-dependent mechanism

journal article published in 2010

Nanoparticle inhalation impairs endothelium-dependent vasodilation in subepicardial arterioles

journal article published in 2009

Nanoparticle inhalation impairs endothelium-dependent vasoreactivity in coronary arterioles

abstract published in 2008

Nanoparticle inhalation increases microvascular oxidative stress and compromises nitric oxide bioavailability

abstract published in 2009

Nanoparticle inhalation modulates arteriolar sympathetic constriction: role of nitric oxide, prostanoids, and alpha-adrenergic receptors

abstract published in 2010

Nanoparticle-containing, spray can aerosol: characterization, exposure assessment, and inhalation chamber design

abstract published in 2010

Nanoparticles alter cyclooxygenase activity in microvascular dysfunction

abstract published in 2011

Nanoparticles-containing spray can aerosol: characterization, exposure assessment, and generator design

scientific article published on October 12, 2010

Nanotechnology: toxicologic pathology

journal article published in 2013

Neuroinflammation and blood-brain barrier changes following exposure to engineered nanomaterials

abstract published in 2009

Particle size-dependent radical generation from wildland fire smoke

journal article published in 2007

Particle-associated systemic microvascular dysfunction

abstract published in 2009

Particulate aerosolization during the drilling of amalgam restoration and teeth

abstract published in 2000

Particulate matter inhalation impairs coronary microvascular reactivity

conference proceedings item published in 2008

Particulate matter inhalation impairs coronary microvascular reactivity

abstract published in 2008

Performance evaluation of the sampling head and annular kinetic impactor in the Savannah River Site alpha continuous air monitor

journal article published in 1999

Performance of a direct reading instrument in characterizing nanoparticles

abstract published in 2015

Performance of a scanning mobility particle sizer in measuring diverse types of airborne nanoparticles: multi-walled carbon nanotubes, welding fumes, and titanium dioxide spray

journal article published in 2016

Peripheral blood gene expression profiling reveals silica-induced pulmonary toxicity

abstract published in 2011

Persistence of deposited metals in the lungs after stainless steel and mild steel welding fume inhalation in rats

journal article published in 2011

Photoacoustic FTIR spectroscopy for crystalline sillca analysis

abstract published in 1998

Physical characterization of multiwalled carbon nanotubes for inhalation studies

abstract published in 2013

Portable X-ray fluorescence spectrometry for measuring multiple airborne metals: a NIOSH screening method under development

abstract published in 2002

Potential prevention strategies to reduce the risk of neurotoxicity associated with manganese-containing welding fumes

abstract published in 2014

Profiling mild steel welding processes to reduce fume emissions and costs in the workplace

journal article published in 2014

Profiling stainless steel welding processes to reduce fume emissions, hexavalent chromium emissions and operating costs in the workplace

journal article published in 2016

Promotion of lung adenocarcinoma following inhalation exposure to multi-walled carbon nanotubes

journal article published in 2014

Pulmonary and cardiovascular responses of rats to inhalation of a commercial antimicrobial spray containing titanium dioxide nanoparticles

journal article published in 2012

Pulmonary effects and tissue distribution of metals after inhalation of mild steel welding fume

conference abstract published in 2008

Pulmonary effects of single-walled carbon nanotubes: inhalation vs aspiration

abstract published in 2009

Pulmonary inflammation, epithelial hyperplasia, and lymph node translocation after multi-walled carbon nanotube inhalation

abstract published in 2011

Pulmonary inhalation of ultrafine TiO2 and cardiovascular effects: a neuronregulated pathway

abstract published in 2012

Pulmonary nanoparticle exposure disrupts systemic microvascular nitric oxide signaling

journal article published in 2009

Pulmonary responses after inhalation of resistance spot welding fume using an adhesive

abstract published in 2012

Pulmonary responses after the inhalation of fumes from resistance spot welding of galvanized zinc-coated steel

abstract published in 2014

Pulmonary toxicity and global gene expression changes in response to sub-chronic inhalation exposure to crystalline silica in rats

journal article published in 2017

Pulmonary toxicity and global gene expression changes in response to subchronic inhalation exposure to crystalline silica in rats

abstract published in 2014

Pulmonary toxicity and global gene expression profile in response to crystalline silica exposure in rats

abstract published in 2013

Pulmonary toxicity following acute coexposures to diesel particulate matter and alpha-quartz crystalline silica in the Sprague-Dawley rat

journal article published in 2017

Pulmonary toxicity following intratracheal instillation of dispersed silver nanoparticles in rats

abstract published in 2011

Pulmonary toxicity following repeated intratracheal instillation of dispersed silver nanoparticles in rats

abstract published in 2012

Pulmonary toxicity in response to inhalation exposure to nanocrystalline cellulose in the rat

abstract published in 2017

Pulmonary toxicity of inhaled multiwalled carbon nanotubes

abstract published in 2009

Rapid detection and quantitation of fungal spores from dust samples using real-time PCR

conference proceedings item published in 2005

Real-time measurement of fluorescence spectra from single airborne biological particles

journal article published in 1999

Relationship between in vivo carcinogenicity and human risk to carbon nanotubes

abstract published in 2014

Repeated co-exposure to diesel exhaust particulate and crystalline silica in rats

abstract published in 2016

Selecting processes to minimize hexavalent chromium from stainless steel welding

journal article published in 2012

Short-term inhalation exposure to mild steel welding fume had no effect on lung inflammation and injury but did alter defense responses to bacteria in rats

journal article published in 2009

Short-term inhalation of stainless steel welding fume causes sustained lung toxicity but no tumorigenesis in lung tumor susceptible A/J mice

journal article published in 2011

Silica exposure and silicosis among tin miners in China: exposure response analyses and risk assessment

abstract published in 1998

Size distribution and estimated respiratory deposition of total chromium, hexavalent chromium, manganese and nickel in gas metal arc welding fume aerosols

abstract published in 2015

Size distribution and estimated respiratory deposition of total chromium, hexavalent chromium, manganese, and nickel in gas metal arc welding fume aerosols

journal article published in 2014

Temporal evaluation of multicompartment molecular signaling following an inhalation exposure to metal-rich particulate matter

abstract published in 2015

The level of submicron fungal fragments in homes with asthmatic children

journal article published in 2014

Thinking outside the lung: alternate routes of nanoparticle exposure

abstract published in 2012

Time course of pulmonary responses to inhaled multiwalled carbon nanotubes

abstract published in 2013

Time-course of impaired coronary arteriolar endothelium-dependent dilation after multi-walled carbon nanotube inhalation

abstract published in 2011

Toxicity and allergy responses in the lung following pulmonary exposure to nanoparticle silver in mice

abstract published in 2014

Toxicity of airborne dust as an indicator of moisture problems in school buildings

journal article published in 2017

Toxicity of lunar dust assessed in inhalation-exposed rats

journal article published in 2013

Toxicological Evaluation of Lung Responses After Intratracheal Exposure to Non-Dispersed Titanium Dioxide Nanorods

scientific article published on January 1, 2011

Toxicological effects of inhaled multi-walled carbon nanotubes on reactivity of isolated rat trachea

abstract published in 2017

Transcriptomics analysis of lungs and peripheral blood of silica-exposed rats

journal article published in 2012

Transcriptomics analysis of lungs and peripheral blood of silica-exposed rats

abstract published in 2012

Two approaches to convert historical mining dust exposures into respirable fraction based on microscope sizing measurements

journal article published in 1999

Type I interferon and pattern recognition receptor signaling following particulate matter inhalation

journal article published in 2012

Ultrafine particulate matter inhalation attenuates microvascular endothelial nitric oxide production

abstract published in 2008

Ultrafine particulate matter inhalation induces remote microvascular dysfunction

conference abstract published in 2006

Using PCR to detect indoor fungi

conference proceedings journal article published in 2002

Welding fumes from stainless steel gas metal arc processes contain multiple manganese chemical species

scientific article published on May 1, 2010

Whole-Body Nanoparticle Aerosol Inhalation Exposures

scientific article published on May 7, 2013

mRNAs and miRNAs in whole blood associated with MWCNT-induced lung hyperplasia, fibrosis, and bronchiolo-alveolar adenoma and adenocarcinoma following inhalation exposure in mice

abstract published in 2015

mRNAs and miRNAs in whole blood associated with lung hyperplasia, fibrosis, and bronchiolo-alveolar adenoma and adenocarcinoma after multi-walled carbon nanotube inhalation exposure in mice

journal article published in 2016