Search filters

List of works by William A. Heitbrink

A comparison of conventional and high volume-low pressure spray- painting guns

journal article published in 1996

A control strategy matrix for the autobody repair industry: spray painting autobody parts in a down draft hood

abstract published in 1998

A numerical and experimental investigation of crystalline silica exposure control during tuck pointing

journal article published in 2006

A numerical and experimental investigation of crystalline silica exposure control during tuck-pointing ⬇️

abstract published in 2002

A pilot study of mist generation at a machining center

conference proceedings item published in 1998

Advantages of real-time data acquisition for exposure assessment

journal article published in 1988

Aerosol generation by blower motors as a bias in assessing aerosol penetration into cabin filtration systems

journal article published in 2005

An approach to evaluating and correcting aerodynamic particle sizer measurements for phantom particle count creation

journal article published in 1992

An approach to performing aerosol measurements

chapter published in 2001

An environmental tractor cab system integrity test ⬇️

abstract published in 2001

An evaluation of control technology for bag opening, emptying and disposal - the self contained filter/bag dump station, The Young Industries, Incorporated, Muncy, Pennsylvania

field study published in 1983

An investigation of dust generation by free falling powders

journal article published in 1992

Analyzing workplace exposures using direct reading instruments and video exposure monitoring techniques ⬇️

NIOSH publication published in 1992

Application of industrial hygiene air sampling data to the evaluation of controls for air contaminants

journal article published in 1984

Case study: mist control following installation of air cleaners on machining centers

conference proceedings item published in 1998

Characterization and mapping of very fine particles in an engine machining and assembly facility

journal article published in 2007

Coincidence in time-of-flight aerosol spectrometers: phantom particle creation

journal article published in 1991

Control del polvo peligroso que se genera durante los procesos de reparación de mortero ⬇️

NIOSH workplace solutions published in 2008

Control measures for silica exposures for tuckpointing

final grant report published in 2005

Control of air contaminants at mixers and mills used in tire manufacturing

journal article published in 1986

Control of air contaminants in tire manufacturing ⬇️

NIOSH publication published in 1984

Control of hazardous dust during tuckpointing ⬇️

NIOSH workplace solutions published in 2008

Control of health and safety hazards in commercial drycleaners: chemical exposures, fire hazards, and ergonomic risk factors ⬇️

NIOSH publication published in 1997

Control of paint overspray in autobody repair shops

journal article published in 1995

Control technology and exposure assessment for occupational exposure to crystalline silica: stone monument manufacturing - Hirons Memorial Works, Inc., Mount Orab, Ohio ⬇️

field study published in 2003

Control technology assessment at Goodyear Tire and Rubber Company, Gadsden, Alabama

publication published in 1981

Control technology for autobody repair and painting shops at Kay Parks/Dan Meyer Autorebuild, Tacoma, Washington ⬇️

field study published in 1992

Control technology for crystalline silica exposures in construction: wet abrasive blasting

journal article published in 2004

Control technology for falling solids at Rohm and Haas, Louisville, Kentucky ⬇️

field study published in 1987

Correlation of tests for material dustiness with worker exposure from the bagging of powders

journal article published in 1989

Correlation of tests for material dustiness with worker exposure from the bagging of powders ⬇️

conference proceedings item published in 1990

Current NIOSH dust control research for noncoal surface mines

conference proceedings item published in 2001

Diffusion effects under low flow conditions

journal article published in 1983

Dust underfoot: enclosed cab-floor heaters can significantly increase operator's respirable dust exposure ⬇️

journal article published in 2001

Dustiness Testers as a Means of Evaluating the Dust Exposure Potential of Powders

conference proceedings item published in 1989

Effect of carbon nanotubes upon emissions from cutting and sanding carbon fiber-epoxy composites

journal article published in 2015

Engineering control of airborne contaminants at a microwave popcorn packaging plant ⬇️

abstract published in 2002

Environmental agricultural tractor cab filter efficiency and field evaluation

journal article published in 2003

Ergonomic applications and control of chemical aerosols

conference proceedings item published in 1988

Evaluation of a tractor cab using real-time aerosol counting instrumentation

journal article published in 2002

Evaluation of a tractor cab using real-time aerosol counting instrumentation

abstract published in 1997

Evaluation of leakage from a metal machining center using tracer gas methods - a case study

conference proceedings item published in 1998

Evaluation of leakage from a metal machining center using tracer gas methods: a case study

journal article published in 1999

Evaluation of mist exposure control following installation of air cleaners on machining centers

abstract published in 1997

Evaluation of ventilated sanders in the autobody repair industry

journal article published in 1994

Executive summary report for particulates Project EPA IAG DW75932460- 01-0

field study published in 1990

Exposure controls for nanomaterials at three manufacturing sites

journal article published in 2015

Exposure estimation procedure for powder handling operations based on dustiness testing

other published in 1989

Factors affecting aerosol measurement quality

chapter published in 1993

Factors affecting the Heubach and MRI dustiness tests

journal article published in 1990

Field assessment of retrofitting surface coal mine equipment cabs with air filtration systems

conference proceedings item published in 2000

Field evaluation of an engineering control for respirable crystalline silica exposures during mortar removal

journal article published in 2007

Field tests of a water induction nozzle as a dust control for abrasive blasting ⬇️

publication published in 2007

Hazard controls: control of paint overspray in autobody repair shops

journal article published in 2001

Health hazard evaluation report: HETA-84-508-1626, Steinmetz & Sons, Moscow, Pennsylvania ⬇️

field study published in 1985

Health hazard evaluation report: HETA-90-088-2110, Yellow Freight System, Inc., Columbus, Ohio, Maybrook, New York ⬇️

field study published in 1990

In-depth study report: control technology for autobody repair shops: small parts painting in a downdraft booth at BASF Corporation, Whitehouse, Ohio ⬇️

field study published in 1999

In-depth study report: control technology for crystalline silica exposures in construction: exposures and preliminary control evaluation at a Restoration Preservation Masonry construction site ⬇️

field study published in 2000

In-depth study report: control technology for crystalline silica exposures in construction: field evaluations of control measures for tuck-pointing, at the Farell Building, Huntington, West Virginia ⬇️

field study published in 2001

In-depth study report: control technology for crystalline silica exposures in construction: wet abrasive blasting at the Nokia Building construction site, Irving, Texas ⬇️

field study published in 1999

In-depth survey of dust control technology for cutting concrete block and tuckpointing brick at The International Masonry Institute, Bordentown Training Center, Bordentown, New Jersey ⬇️

field study published in 2007

In-depth survey report, concentration of metalworking mists before and after installation of a commercial air cleaner, at Sauer-Sundstrand Company, Ames, Iowa ⬇️

field study published in 1997

In-depth survey report, weighing and batching at BF Goodrich Company, Akron, Ohio ⬇️

field study published in 1985

In-depth survey report: assessment of nanoparticle emissions from a chemical laboratory using carbon nanotubes - revised ⬇️

field study published in 2013

In-depth survey report: case study: modifying processes to control exposure to engineered nanographene particles ⬇️

field study published in 2013

In-depth survey report: case study: particle emissions from the processes of machining nanocomposites ⬇️

field study published in 2013

In-depth survey report: characterization of metalworking mists during the evaluation of a commercial air cleaner at Sauer-Sundstrand Company, LaSalle, Illinois ⬇️

field study published in 1997

In-depth survey report: characterization of metalworking mists during the evaluation of a commercial air cleaner at Sauer-Sundstrand, Ames, Iowa ⬇️

field study published in 1996

In-depth survey report: control technology assessment of solid material handling. Phase I - bag opening, emptying, and disposal at Rohm and Haas, Bristol, Pennsylvania ⬇️

field study published in 1985

In-depth survey report: control technology for agricultural environmental enclosures at John Deere Manufacturing Co., Inc., Waterloo, Iowa ⬇️

field study published in 1997

In-depth survey report: control technology for agricultural environmental enclosures at Nelson Manufacturing Company, Inc., Yuba City, California ⬇️

field study published in 1997

In-depth survey report: control technology for autobody repair and painting shops at Blue Ash Autobody Shop, Blue Ash, Ohio ⬇️

field study published in 1993

In-depth survey report: control technology for autobody repair and painting shops at Cincinnati Collision Autobody Shop, Blue Ash, Ohio ⬇️

field study published in 1993

In-depth survey report: control technology for autobody repair and painting shops at Jeff Wyler Autobody Shop, Batavia, Ohio ⬇️

field study published in 1993

In-depth survey report: control technology for autobody repair and painting shops at Team Chevrolet, Colorado Springs, Colorado ⬇️

field study published in 1993

In-depth survey report: control technology for autobody repair and painting shops at Valley Paint and Body Shop, Amelia, Ohio ⬇️

field study published in 1993

In-depth survey report: control technology for crystalline silica exposures in construction-effect of exhaust flow rate upon-res ⬇️

field study published in 2001

In-depth survey report: control technology for crystalline silica exposures in construction: exposures and preliminary control evaluation at various sites for Bricklayers Local #9, Pittsburgh, Pennsylvania ⬇️

field study published in 2000

In-depth survey report: control technology for environmental enclosures - an evaluation of in-use enclosures at John Deere Product Engineering Center, Waterloo, Iowa ⬇️

field study published in 2001

In-depth survey report: control technology for environmental enclosures - an evaluation of in-use enclosures at Nelson Manufacturing Company, Yuba City, California ⬇️

field study published in 2000

In-depth survey report: control technology for environmental enclosures - an evaluation of in-use enclosures at Sun Pacific, Bakersfield, California ⬇️

field study published in 2000

In-depth survey report: control technology for environmental enclosures - the effect of wind speed upon aerosol penetration into an enclosure at Clean Air Filter, Defiance, Iowa ⬇️

field study published in 1999

In-depth survey report: control technology for environmental enclosures: an evaluation of in-use enclosures at San Joaquin Helicopter Company, Delano, California ⬇️

field study published in 2000

In-depth survey report: control technology for falling solids at Cincinnati Paint and Varnish, Cincinnati, Ohio ⬇️

field study published in 1988

In-depth survey report: control technology for manual dye weigh-out operations at Multi Color Industries Inc., Brooklyn, New York (superseded)

superseded field study published in 1995

In-depth survey report: control technology for manual dye weigh-out operations at Multi Color Industries, Inc., Brooklyn, New York ⬇️

field study published in 1995

In-depth survey report: control technology for manual dye weigh-out operations at Uni-Trade Company, Inc., Newark, New Jersey ⬇️

field study published in 1993

In-depth survey report: control technology for manual dye weigh-out operations at the Glidden Company, Huron, Ohio ⬇️

field study published in 1993

In-depth survey report: control technology for manual transfer of chemical powders at The B. F. Goodrich Company, Marietta, Ohio ⬇️

field study published in 1985

In-depth survey report: control technology for solids material handling at General Motors Corporation, Inland Division, Vandalia, Ohio ⬇️

field study published in 1984

In-depth survey report: engineering controls for nano-scale graphene platelets during manufacturing and handling processes ⬇️

field study published in 2011

In-depth survey report: evaluation of enclosed reactor for the production of aligned carbon nanotubes ⬇️

field study published in 2012

In-depth survey report: evaluation of enclosing hood and downflow room for nanocomposite manufacturing ⬇️

field study published in 2012

In-depth survey report: evaluation of spray gun technology for occupational exposure to auto paint shop hazards at DeVilbiss Automotive Refinishing Products, Maumee, Ohio ⬇️

field study published in 1994

In-depth survey report: solids materials handling project at 3M Company, Grove City, Ohio ⬇️

field study published in 1984

Indepth survey report: Macawber Engineering, Inc., Maryville, Tennessee ⬇️

field study published in 1984

Indepth survey report: control technology for Richard Klinger Incorporated, Sidney, Ohio ⬇️

field study published in 1984

Laboratory evaluation of ventilated shrouds for mortar grinding ⬇️

abstract published in 2001

Mist control at a machining center, part 1: mist characterization

journal article published in 2000

Mist control at a machining center, part 2: mist control following installation of air cleaners

journal article published in 2000

Mist generation at a machining center

journal article published in 2000

NIOSH Hazard ID, HID 9 - respirable crystalline silica exposures during tuck pointing (superseded)

superseded NIOSH hazard ID published in 1999

NIOSH control technology assessment at Armstrong Rubber Company, Hanford, California

field study published in 1981

NIOSH control technology assessment at Firestone Tire and Rubber Company, Wilson, North Carolina

field study published in 1981

NIOSH control technology assessment at General Tire and Rubber Company, Charlotte, North Carolina

field study published in 1981

NIOSH control technology assessment at General Tire and Rubber Company, Waco, Texas

publication published in 1981

NIOSH control technology assessment at Goodyear Tire and Rubber Company, Union City, Tennessee

publication published in 1981

NIOSH control technology assessment at Uniroyal Tire Company, Ardmore, Oklahoma

publication published in 1981

NIOSH identificación del peligro, HID 9 - exposición a la sílice cristalina respirable durante las operaciones de reparación de mortero (reemplazada)

NIOSH hazard ID published in 1999

NIOSH/industry collaborative efforts show improved mining equipment cab dust protection

conference proceedings item published in 2003

NIOSH/industry collaborative efforts show improved mining equipment cab dust protection ⬇️

journal article published in 2003

Particle emissions from laboratory activities involving carbon nanotubes

journal article published in 2017

Preliminary survey report: control technology for manual transfer of chemical powders at SCM Glidden Coatings and Resins, Huron, Ohio

field study published in 1985

Protecting tuckpointing workers from silica dust: draft recommendations for a ventilated grinder ⬇️

publication published in 2005

Real-time exposure assessment and job analysis techniques to solve hazardous workplace exposures

chapter published in 1996

Real-time, integrated, and ergonomic analysis of dust exposure during manual materials handling

journal article published in 1987

Recommendations for the study of control measures for overspray generated during bed liner application ⬇️

field study published in 2003

Reducing enclosed cab drill operator's respirable dust exposure at a surface coal operation using a retrofitted filtration and pressurization system ⬇️

journal article published in 2003

Reducing enclosed cab drill operator's respirable dust exposure at surface coal operation with a retrofitted filtration and pressurization system

conference proceedings item published in 2002

Reducing enclosed cab drill operator's respirable dust exposure with effective filtration and pressurization techniques

journal article published in 2005

Reducing enclosed cab drill operator's respirable dust exposure with effective filtration and pressurization techniques ⬇️

abstract published in 2003

Reducing silica exposure to miners at surface operations in the United States ⬇️

conference abstract published in 2002

Relationships among particle number, surface area, and respirable mass concentrations in automotive engine manufacturing

journal article published in 2009

Request for assistance in preventing lead poisoning in construction workers (revised) ⬇️

NIOSH alert published in 1992

Request for assistance in preventing lead poisoning in construction workers (superseded)

superseded NIOSH alert published in 1991

Respirable crystalline silica exposures during tuck pointing

journal article published in 2000

Review of ambient aerosol test procedures in ASAE standard S525

journal article published in 1998

Static pressure requirements for ventilated enclosures

conference proceedings item published in 2000

Study report: evaluation of dustiness test methods and recommendations for improved dust control at Heubach Inc., Newark, New Jersey ⬇️

field study published in 1989

Survey report: control technology for autobody repair and painting shops at Church Brother's Collision Repair, Greenwood, Indiana ⬇️

field study published in 1992

Survey report: control technology for manual powder weigh-out operations at Merck and Company, Wilson, North Carolina ⬇️

field study published in 1994

Survey report: potential options for the control of border agents exposure to vehicle emissions at United States Port of Entry, San Ysidro, California ⬇️

field study published in 1999

Test for the integrity of environmental tractor cab filtration systems

journal article published in 2005

The application of dustiness tests to the prediction of worker dust exposure

journal article published in 1990

The effect of debris accumulation on and filter resistance to airflow for four commercially available vacuum cleaners

journal article published in 2009

The effect of debris accumulation upon air flow and filter resistance to air flow for four commercially available vacuum cleaners ⬇️

publication published in 2008

The effect of wind speed upon aerosol penetration into an enclosure ⬇️

abstract published in 2000

The mapping of fine and ultrafine particle concentrations in an engine machining and assembly facility

journal article published in 2006

The use of a helium bubble generator to evaluate the role of entrained airflow in dust generation

other published in 1989

The use of ambient aerosol for testing agricultural cabs for protection against pesticide aerosol

abstract published in 1998

Ultrafine and respirable particles in an automotive grey iron foundry

journal article published in 2008

Use of ambient aerosol for testing agricultural cabs for protection against pesticide aerosol

journal article published in 1999

Video exposure monitoring - a means of studying sources of occupational air contaminant exposure, part 2 - data interpretation

journal article published in 1993

Video exposure monitoring - a means of studying sources of occupational air contaminant exposure, part I - video exposure monitoring techniques

journal article published in 1993

Walk-through survey report, control technology for Celotex Corporation, Perth Amboy, New Jersey

field study published in 1983

Walk-through survey report, control technology for General Motors at General Motors - Inland Division, Vandalia, Ohio

field study published in 1983

Walk-through survey report, control technology for solid materials handling, Bethlehem Steel Corp., Steelton Plant, Steelton, Pennsylvania

field study published in 1983

Walk-through survey report: control technology for bag opening, emptying, and disposal at Lakewood Chemical Company, East Palestine, Ohio ⬇️

field study published in 1984

Walk-through survey report: control technology for solid materials handling at GNB Batteries, St. Paul, Minnesota

field study published in 1984

Walk-through survey report: potential options for the control of border agents exposure to vehicle emissions at United States Port of Entry, Calexico, California ⬇️

field study published in 1999

Work practices for rubber compounding and mixing areas

publication

Paulina is supported by:

About Paulina

Help