(Cryo)-TEM Assessment of Droplet Nucleation Efficiency in Hybrid Acrylic/CeO2 Semibatch Miniemulsion Polymerization

(Mini)emulsion Polymerization: Effect of the Segregation Degree on Polymer Architecture

A new strategy to improve alkyd/acrylic compatibilization in waterborne hybrid dispersions

Accelerated ageing of hybrid acrylic waterborne coatings containing metal oxide nanoparticles: Effect on the microstructure

Activity and stability of single and perovskite-type manganese and cobalt oxides in the catalytic combustion of acetone

Beneficial in-situ incorporation of nanoclay to waterborne PVAc/PVOH dispersion adhesives for wood applications

Catalytic combustion of volatile organic compounds on Au/CeO2/Al2O3 and Au/Al2O3 catalysts

Catalytic combustion of volatile organic compounds on gold/titanium oxynitride catalysts

Chapter 10. Polymer–Clay Nanocomposites by Miniemulsion Polymerization

Co-encapsulation of CdSe/ZnS and CeO2 nanoparticles in waterborne polymer dispersions: enhancement of fluorescence emission under sunlight

scientific article published on 23 October 2017

Confinement driven crystallization of ABA crystalline-soft-crystalline block copolymers synthesized via RAFT mediated miniemulsion polymerization

Continuous miniemulsification for the industrialization of miniemulsion polymerization

Corrigendum to ‘Particle nucleation and growth in seeded semibatch miniemulsion polymerization of hybrid CeO2/acrylic latexes’ [Polymer 55/3 (2014) 752–761]

scholarly article published in Polymer

Cross-linked network development in compatibilized alkyd/acrylic hybrid latex films for the creation of hard coatings

scientific article published on September 2010

Crosslinked reduced graphene oxide/polymer composites via in situ synthesis by semicontinuous emulsion polymerization

scholarly article in RSC Advances, vol. 5 no. 21, 2015

Design of Waterborne Asymmetric Block Copolymers as Thermoresponsive Materials

scientific article published on 30 May 2020

Determination of the Coalescence Temperature of Latexes by Environmental Scanning Electron Microscopy

scientific article published on 27 July 2012

Dielectric relaxations of Acrylic-Polyurethane hybrid materials

Effect of alkali-soluble resin emulsifiers on coalescence and interdiffusion between latex polymer particles

Effect of controlled length acrylic acid-based electrosteric stabilizers on latex film properties

article published in 2014

Effect of the Incorporation of Modified Silicas on the Final Properties of Wood Adhesives

Encapsulation of clay within polymer particles in a high-solids content aqueous dispersion

scientific article published on 24 July 2013

Encapsulation with Miniemulsion Polymerization

Evolution of particle morphology during the synthesis of hybrid acrylic/CeO2nanocomposites by miniemulsion polymerization

Film forming hybrid acrylic/ZnO latexes with excellent UV absorption capacity

From Polymer Latexes to Multifunctional Liquid Marbles

scientific article published on 11 February 2015

From miniemulsion to nanoemulsion polymerization of superhydrophobic monomers through low energy phase inversion temperature

scholarly article in Journal of Industrial and Engineering Chemistry, vol. 58, February 2018

High Solids Content Waterborne Acrylic/Montmorillonite Nanocomposites by Miniemulsion Polymerization

High-Performance Adhesives Resulting from Spontaneous Formation of Nanogels within Miniemulsion Particles

scientific article published on 07 February 2014

High-Solids Content Waterborne Polymer-Clay Nanocomposites

High-Solids-Content Hybrid Acrylic/CeO2Latexes with Encapsulated Morphology Assessed by 3D-TEM

Hybrid acrylic/CeO2 nanocomposites using hydrophilic, spherical and high aspect ratio CeO2 nanoparticles

Incorporation of a Coumarate Based Corrosion Inhibitor in Waterborne Polymeric Binders for Corrosion Protection Applications

Influence of the surface adsorption–desorption processes on the ignition curves of volatile organic compounds (VOCs) complete oxidation over supported catalysts

Isolation of the effect of the hairy layer length on the mechanical properties of waterborne coatings

Kinetic and microstructural study of the continuous emulsion polymerization of an all-acrylics formulation in the loop reactor

Kinetics of the emulsion copolymerization of MMA/BA in the presence of sodium montmorillonite

Knowledge-Based Production of Waterborne Hybrid Polymer Materials

article

Macroinitiator and Macromonomer Modified Montmorillonite for the Synthesis of Acrylic/MMT Nanocomposite Latexes

Magnetic Poly(Ionic Liquid) Microcapsules for Oil Capture and Recovery

Mechanical and Morphological Properties of Waterborne ABA Hard-Soft-Hard Block Copolymers Synthesized by Means of RAFT Miniemulsion Polymerization

scientific article published on 30 July 2019

Mechanistic investigation of the simultaneous addition and free-radical polymerization in batch miniemulsion droplets: Monte Carlo simulation versus experimental data in polyurethane/acrylic systems

Miniemulsification in high-pressure homogenizers

Miniemulsification of Monomer-Resin Hybrid Systems

Modeling the equilibrium morphology of nanodroplets in the presence of nanofillers

scientific article published on 21 September 2010

Molecular characterization of alkyd/acrylic latexes prepared by miniemulsion polymerization

Morphology and properties of waterborne adhesives made from hybrid polyacrylic/montmorillonite clay colloidal dispersions showing improved tack and shear resistance

Morphology of Polymer/Clay Latex Particles Synthesized by Miniemulsion Polymerization: Modeling and Experimental Results

New agitated and thermostatized cell forin situmonitoring of fast reactions by synchrotron SAXS

scientific article published on 25 September 2009

Particle nucleation and growth in seeded semibatch miniemulsion polymerization of hybrid CeO2/acrylic latexes

Polymerization kinetics and microstructure of waterborne acrylic/alkyd nanocomposites synthesized by miniemulsion

Post-polymerization of waterborne alkyd/acrylics. Effect on polymer architecture and particle morphology

Preparation and characterization of niobium oxide for the catalytic aldol condensation of acetone

scholarly article by Maria Paulis et al published April 1999 in Applied Catalysis A: General

Preparation of poly(ionic liquid) nanoparticles and their novel application as flocculants for water purification

Process-Guided Product Design of Hybrid Polymer Materials

Production of Widely Different Dispersed Polymers in a Continuous Taylor-Couette Reactor

Radical initiator modified cerium oxide nanoparticles for polymer encapsulation via grafting from the surface

scholarly article in RSC Advances, vol. 4 no. 106, 2014

Routes towards the Synthesis of Waterborne Acrylic/Clay Nanocomposites

Simple route to prepare stable liquid marbles using poly(ionic liquid)s

Surfactant-Free Miniemulsion Polymerization of n-BA/S Stabilized by NaMMT: Films with Improved Water Resistance

scientific article published on 05 February 2013

Synthesis of poly-(BA-co-MMA) latexes filled with SiO2 for coating in construction applications

Synthesis of waterborne acrylic/clay nanocomposites by controlled surface initiation from macroinitiator modified montmorillonite

The effect of the crosslinking agent on the performance of propranolol imprinted polymers

Toward the minimization of fluorescence loss in hybrid cross-linked core-shell PS/QD/PMMA nanoparticles: Effect of the shell thickness

Towards the production of high performance lauryl methacrylate based polymers through emulsion polymerization

article

Towards the synthesis of high solids content waterborne poly(methyl methacrylate-co-butyl acrylate)/montmorillonite nanocomposites

Transformation of waterborne hybrid polymer particles into films: Morphology development and modeling

article

UV screening clear coats based on encapsulated CeO2 hybrid latexes

article published in 2013

Use of a Routh-Russel deformation map to achieve film formation of a latex with a high glass transition temperature

scientific article