Search filters

List of works by Markus Bambach

A Cohesive Zone Model for Simulation of the Bonding and Debonding in Metallic Composite Structures - Experimental Validations

scientific article published on 26 September 2014

A Fast Approach for Optimization of Hot Stamping Based on Machine Learning of Phase Transformation Kinetics

scientific article published in 2020

A New Compression-Torsion-Tribometer with Scalable Contact Pressure for Characterization of Tool Wear during Plastic Deformation

A New Process Design for Performing Hole-flanging Operations by Incremental Sheet Forming

scientific article published in 2014

A Simple Approach to Stiffness Enhancement of a Printable Shape by Hamilton-Jacobi Skeletonization

scientific article published in 2020

A Study On The Mechanical Properties Of Hybrid Parts Manufactured By Forging And Wire Arc Additive Manufacturing

scientific article published in 2020

A compression-torsion-wear-test achieving contact pressures of up to eight times the initial flow stress of soft aluminium

scientific article published in 2015

A finite element framework for the evolution of bond strength in joining-by-forming processes

scientific article published in October 2014

A modular tooling set-up for incremental sheet forming (ISF) with subsequent stress-relief annealing under partial constraints

scientific article published in 2017

A new high strength Al–Mg–Sc alloy for laser powder bed fusion with calcium addition to effectively prevent magnesium evaporation

scientific article published in February 2022

A new method to determine isothermal flow curves for integrated process and microstructural simulation in metal forming

scientific article published on 2 October 2013

A new model for dynamic recrystallization under hot working conditions based on critical dislocation gradients

scientific article published in 2017

A soft sensor for property control in multi-stage hot forming based on a level set formulation of grain size evolution and machine learning

scientific article published in May 2021

A study on hot-working as alternative post-processing method for titanium aluminides built by laser powder bed fusion and electron beam melting

scientific article published in May 2021

A study on power-controlled wire-arc additive manufacturing using a data-driven surrogate model

scientific article published on 22 June 2021

A weld bead footprint locus model for predicting the overlap of weld beads in wire arc additive manufacturing

scientific article published in November 2024

Accelerated hot deformation and heat treatment of the TiAl alloy TNM-B1 for enhanced hot workability and controlled damage

scientific article published in May 2021

Accounting for shear deformation in fast models for plate rolling

scientific article published on 25 September 2013

Alloy design and adaptation for additive manufacture

scientific article published in January 2022

An enhanced TRIP material model for high martensite content evolution during deep drawing

scholarly article

Analysis and compensation of shrinkage and distortion in wire-arc additive manufacturing of thin-walled curved hollow sections

scientific article published in November 2021

Analysis into Differences between the Buckling in Single-Point and Two-Point Incremental Sheet Forming of Components for Self-Supporting Sheet Metal Structures<sup></sup>

scientific article published on 26 September 2014

Analytical and Numerical Temperature Prediction in Direct Metal Deposition of Ti6Al4V

scientific article published on 10 July 2017

Application of 3D (color) printing for the visualization and optimization of complex metal forming processes

scientific article published in 2017

Applying Machine Learning to the Phenomenological Flow Stress Modeling of TNM-B1

scholarly article

Assessing and ensuring parameter identifiability for a physically-based strain hardening model for twinning-induced plasticity

scientific article published in May 2015

Avoiding crack nucleation and propagation during upset bulging of tubes

scientific article published on 7 April 2016

Batch Processing in Preassembled Die Sets—A New Process Design for Isothermal Forging of Titanium Aluminides

scientific article published in January 2018

Beyond parabolic weld bead models: AI-based 3D reconstruction of weld beads under transient conditions in wire-arc additive manufacturing

scientific article published in April 2022

Case Studies on Local Reinforcement of Sheet Metal Components by Laser Additive Manufacturing

scientific article published on 25 March 2017

Characteristics of testing conditions for constitutive models in metal plasticity

scientific article published on 23 April 2014

Characterization of residual stresses in austenitic disc springs induced by martensite formation during incremental forming using micromagnetic methods

scientific article published on 4 April 2017

Comparison of Linear Regression and Neural Networks as Surrogates for Sensor Modeling on a Deep Drawn Part

scientific article published in 2021

Comparison of Microstructure and Mechanical Properties of Scalmalloy® Produced by Selective Laser Melting and Laser Metal Deposition.

scientific article published on 23 December 2017

Comparison of Semi-empirical and Dislocation Density based Material Equations for Fast Modeling of Multistage Hot Working of Steel

scientific article published in 2014

Comparison of laser metal deposition of Inconel 718 from powder, hot and cold wire

scholarly article

Comparison of manufacturing of lightweight corrugated sheet sandwiches by hydroforming and incremental sheet forming

scientific article published in 2016

Comparison of the Hot Working Behavior of Wrought, Selective Laser Melted and Electron Beam Melted Ti-6Al-4V

scholarly article

Compensation of Geometric, Backlash, and Thermal Drift Errors Using a Universal Industrial Robot Model

scientific article published in October 2024

Complex dynamic restoration processes leading to a high degree of deformability in a dual-phase Al0.5CoCrFeNi high entropy alloy

scientific article published in October 2022

Computational and experimental investigation of thermally auxetic multi-metal lattice structures produced by laser powder bed fusion

scientific article published on 11 September 2024

Continuous Eulerian tool path strategies for wire-arc additive manufacturing of rib-web structures with machine-learning-based adaptive void filling

scientific article published in October 2020

Coupling of Crystal Plasticity Finite Element and Phase Field Methods for the Prediction of SRX Kinetics after Hot Working

scientific article published on 28 January 2014

Creating load-adapted mechanical joints between tubes and sheets by controlling the material flow under plastically unstable tube upsetting

scientific article published in 2017

DECOMPOSITION ALGORITHM FOR TOOL PATH PLANNING FOR WIRE-ARC ADDITIVE MANUFACTURING

scientific article published on 22 February 2018

Deformation error compensation of industrial robots in single point incremental forming by means of data-driven stiffness model

scientific article published on 2 September 2021

Development of Tool Paths for Multi-axis Single Stage Incremental Hole-flanging

scientific article published in 2020

Development of a Model for Dynamic Recrystallization Consistent with the Second Derivative Criterion

scientific article

Development of a Pneumatic Bulge Test for High Temperatures and Controlled Strain Rates

scientific article published on 12 September 2014

Development of a Testing Procedure to Determine the Bond Strength in Joining-by-Forming Processes

scientific article published on 30 June 2014

Development of a dynamic recrystallization model for a β-solidifying titanium aluminide alloy using Kocks-Mecking plots

scientific article published in 2016

Development of a heat treatment strategy for the γ-TiAl based alloy TNM-B1 to increase the hot workability

scientific article published on 30 October 2019

Development of a processing route for Ti-6Al-4V forgings based on preforms made by selective laser melting

scholarly article

Development of efficient production routes based on strip casting for advanced high strength steels for crash-relevant parts

scientific article published in 2014

Development of tooling concepts to increase geometrical accuracy in high speed incremental hole flanging

scientific article published on 25 May 2017

Devising Strain Hardening Models Using Kocks–Mecking Plots—A Comparison of Model Development for Titanium Aluminides and Case Hardening Steel

scientific article published on 29 August 2016

Digitisation of metal AM for part microstructure and property control

scientific article published in 2022

Direct FE 2 Based on Single-Integration Point for Modeling Damage Evolution of Materials with Micro-Cracks

scientific article published in June 2024

Directed energy deposition of Inconel 718 powder, cold and hot wire using a six-beam direct diode laser set-up

scientific article published in November 2021

Dominant deformation mechanisms in single point incremental forming (SPIF) and their effect on geometrical accuracy

scientific article published in February 2018

Dynamic recrystallization-dependent damage modeling during hot forming

scientific article published on 12 May 2019

EXTENSION OF A PHASE TRANSFORMATION MODEL FOR PARTIAL HARDENING IN HOT STAMPING

scholarly article

Editorial

scientific article published in August 2021

Editorial to special issue “Property-controlled forming processes”

scientific article published in May 2022

Effect of heat treatment on the workability of hot isostatically pressed TNM-B1

scientific article published in 2019

Effects of CuCr1Zr contamination on the tensile properties and microstructure of stainless steel 316L produced via laser powder bed fusion

scientific article published on 31 May 2024

Effects of build- and scan-directions on magnetic field-assisted finishing of 316L stainless steel disks produced with selective laser melting

scientific article published in November 2020

Engineering the residual stress state of the metastable austenitic stainless steel (MASS) disc springs by incremental sheet forming (ISF)

scientific article published on 5 December 2018

Enhancing the crashworthiness of high-manganese steel by strain-hardening engineering, and tailored folding by local heat-treatment

scientific article published in November 2016

Evaluation of process-induced damage based on dynamic recrystallization during hot caliber rolling ⬇️

scholarly article

Experimental and Numerical Investigation of the Influence of Process Parameters in Incremental Sheet Metal Forming on Residual Stresses

scholarly article

Experimental investigation and finite element modelling of residual stress control in disc springs made of metastable austenitic stainless steel (MASS) using incremental sheet forming (ISF)

scholarly article

Extended Gurson–Tvergaard–Needleman model for damage modeling and control in hot forming

scholarly article

Extended Simulations of the Roll Bonding Process

scholarly article

Extruded joining elements manufactured by friction stir forming: an investigation of the process parameters

scientific article published in February 2020

FEEDBACK CONTROL FOR RANDOM, LINEAR HYPERBOLIC BALANCE LAWS

scientific article published in 2022

Fabrication of thin-walled hat-shaped beams from ultrahigh strength steel by laser-assisted robotic roller forming

scientific article published on 14 October 2023

Fast Development of New Alloys for Metal Forming Using Additive Manufacturing

scientific article published in 2021

Fast simulation of incremental sheet metal forming by adaptive remeshing and subcycling

scientific article published on 23 December 2014

Faster than real-time path-sensitive temperature modeling of wire-arc additive manufacturing by a data-driven finite volume method

scientific article published in 2022

Fatigue properties of Scalmalloy® processed by laser powder bed fusion in as-built, chemically and conventionally machined surface condition

scientific article published in January 2023

Feedback stabilization of forming processes

scientific article published in 2021

Finite Element Implementation of a Bonding Model and Application to Roll Bonding of Aluminum Sheets of Largely Different Yield Strength

scientific article published on 23 May 2014

Finite Element Modelling of Titanium Aluminides

scientific article published in 2017

Flexibility in metal forming

scientific article published in 2018

Flexible Manufacturing of Double-Curved Sheet Metal Panels for the Realization of Self-Supporting Freeform Structures

scientific article published in March 2015

Formability Analysis of Micro-Alloyed Sheet Metals Reinforced by Additive Manufacturing

scientific article published in 2020

High load-bearing multi-material-joints of metal sheets and composites by incremental in-situ forming processes

scientific article published in 2016

Hot Workability of a Spark Plasma Sintered Intermetallic Iron Aluminide Alloy Above and Below the Order-disorder Transition Temperature

scientific article published in 2020

Hot deformation behavior of a spark plasma sintered Fe-25Al-1.5Ta alloy with strengthening Laves phase

scholarly article

Hot workability and microstructure evolution of pre-forms for forgings produced by additive manufacturing

scientific article published in June 2018

Hot workability and microstructure evolution of pre-forms for forgings produced by additive manufacturing

scientific article published in 2017

Hot workability and microstructure evolution of the nickel-based superalloy Inconel 718 produced by laser metal deposition

scientific article published in April 2018

Hot working behavior of selective laser melted and laser metal deposited Inconel 718

scientific article published in 2018

Hybrid manufacturing of components from Ti-6Al-4V by metal forming and wire-arc additive manufacturing

scientific article published in August 2020

Hybrid manufacturing of sheet metals and functionalizing for joining applications via hole flanging

scientific article published on 15 February 2021

ICME for Crashworthiness of TWIP Steels: From Ab Initio to the Crash Performance

scientific article published on 21 November 2014

Impact and damage behaviour of FRP-metal hybrid laminates made by the reinforcement of glass fibers on 22MnB5 metal surface ⬇️

scholarly article

Impact of the Microstructure on the U–O Forming Simulations of a Ferrite–Pearlite Pipeline Tube

scientific article published on 7 March 2014

Improving geometrical accuracy for flanging by incremental sheet metal forming

scientific article published on 13 June 2014

Improving the crash behavior of structural components made of advanced high strength steel by local heat treatment

scientific article published in November 2016

Increasing formability in hole-flanging through the use of punch rotation based on temperature and strain rate dependent forming limit curves

scientific article published on 13 April 2022

Influence of process parameters on the residual stress state and properties in disc springs made by incremental sheet forming (ISF)

scientific article published on 31 May 2021

Influence of the Process Temperature on the Properties of Friction Stir Welded Blanks Made of Mild Steel and Aluminum

scientific article published on 23 May 2014

Integrated Forming and Surface Engineering of Disc Springs by Inducing Residual Stresses by Incremental Sheet Forming

scientific article published on 20 May 2019

Intelligent Iterative Experimental Design to Achieve Maximum Model Quality for Phase Change of 22MnB5

scientific article published in 2022

Introduction of a Method for Systematic Surface Defect Classification on Virtual Car Body Parts

scientific article published on 9 January 2023

Investigation of a Bulge Test at High Temperatures and High Strain Rates Using a Finite-Element Simulation Study

scientific article published on 26 September 2014

Investigation of martensite-transformation and forming properties of additively reinforced 22MnB5 sheet metals

scientific article published in 2019

Investigation of microstructure and hardness of a rib geometry produced by metal forming and wire-arc additive manufacturing

scholarly article

Investigation of the Suitability of Surface Treatments for Dry Cold Extrusion by Process-Oriented Tribological Testing

scientific article published on 10 July 2015

Investigations on hole-flanging by paddle forming and a comparison with single point incremental forming

scientific article published in December 2019

Isothermal forging of titanium aluminides without beta-phase — Using non-equilibrium phases produced by spark plasma sintering for improved hot working behavior

scholarly article

Joining of aluminum sheet and glass fiber reinforced polymer using extruded pins

scientific article published in 2018

Keynote: Lifetime Improvement of Radiant Tubes Using Structured Steel Sheets

scientific article published in 2019

Laser Metal Deposition of Ti-6Al-4V with a Direct Diode Laser Set-up and Coaxial Material Feed

scientific article published in 2020

Laser Preheating for Hot Crack Reduction in Direct Metal Deposition of Inconel 738LC

scientific article published on 2 April 2022

MODELING AND CONVERGENCE ANALYSIS OF DIRECTED ENERGY DEPOSITION SIMULATIONS WITH HYBRID IMPLICIT / EXPLICIT AND IMPLICIT SOLUTIONS

scientific article published on 15 September 2019

Manufacturing of Innovative Self-supporting Sheet-metal Structures Representing Freeform Surfaces

scientific article published in 2014

Material Properties of Features Produced from EN AW 6016 by Wire-Arc Additive Manufacturing

scientific article published in 2020

Mathematical Modeling and Optimization for Powder-Based Additive Manufacturing

scientific article published in 2020

Mechanical properties of sheet metal components with local reinforcement produced by additive manufacturing

scientific article published in 2018

Microalloyed Engineering Steels with Improved Performance – an Overview*

scientific article published on 13 December 2017

Microstructures and Mechanical Properties of Hybrid, Additively Manufactured TiAlV after Thermomechanical Processing

scientific article published on 22 February 2021

Model Predictive Control of the Punch Speed for Damage Reduction in Isothermal Hot Forming

scientific article published on 20 March 2019

Modeling steel rolling processes by fluid-like differential equations

scientific article published in March 2017

Modeling the Residual Stresses Induced in the Metastable Austenitic Stainless Steel Disc Springs manufactured by Incremental Sheet Forming by a Combined Hardening Model with Phase Transformation

scientific article published in 2020

Modelling and simulation of metal additive manufacturing processes with particle methods: A review

scientific article published on 8 November 2023

Multi-Resolution SPH Simulation of a Laser Powder Bed Fusion Additive Manufacturing Process

scientific article published on 26 March 2021

Multi-bead Overlapping Models for Tool Path Generation in Wire-Arc Additive Manufacturing Processes

scientific article published in 2020

Multimaterial powder bed fusion techniques

scientific article published on 15 March 2022

New Hybrid Manufacturing Routes Combining Forging and Additive Manufacturing to Efficiently Produce High Performance Components from Ti-6Al-4V

scientific article published in 2020

New process chains involving additive manufacturing and metal forming – a chance for saving energy?

scientific article published in 2017

Numerical Analysis of Different Fixation Strategies in Direct Energy Deposition Processes

scientific article published in 2020

Numerical analysis of damage during hot forming

scientific article published in 2018

Numerical prediction of process-dependent properties of high-performance Ti6Al4 in LS-DYNA

scientific article published on 5 April 2021

On instabilities of force and grain size predictions in the simulation of multi-pass hot rolling processes

scientific article published in February 2015

On the Numerical Prediction of Process-Dependent Properties of Current High-Performance Materials with Material Model *MAT_254 in LS-DYNA

scientific article published in 2020

On the Potential of Using Selective Laser Melting for the Fast Development of Forging Alloys at the Example of Waspaloy

scientific article published in 2020

On the applicability of recovery-annealed Twinning-Induced Plasticity steels: Potential and limitations

scientific article published in January 2016

On the hot deformation behavior of Ti-6Al-4V made by additive manufacturing

scientific article published in February 2021

Online data assimilation of a hybrid flow stress model by particle filtering

scientific article published in 2021

Optimization of a Closed Die Forging Process to Manufacture a Gear Wheel by the Use of a Response Surface Model

scientific article published on 7 May 2014

PADDLE SHAPE OPTIMIZATION FOR HOLE-FLANGING BY PADDLE FORMING THROUGH THE USE OF A PREDEFINED STRAIN PATH IN FINITE ELEMENT ANALYSIS

scholarly article

Prediction of Mechanical Properties of Ti-6Al-4V Forgings Based on Simulation of Microstructure Evolution

scientific article published in 2020

Process optimization of joining by upset bulging with local heating

scientific article published in 2017

RLTube: Reinforcement learning based deposition path planner for thin-walled bent tubes with optionally varying diameter manufactured by wire-arc additive manufacturing

scholarly article

Re-Meshing in Finite Element Simulations of Hot Working Including a Microstructural Evolution Model

scientific article published on 23 May 2014

Reinforcement of Tooling Using Residual Stresses Generated by Cladding by Arc Welding

scientific article published on 8 June 2022

Residual Stress and Microstructure of a Ti-6Al-4V Wire Arc Additive Manufacturing Hybrid Demonstrator

scientific article published on 26 May 2020

Revealing the Dominant Forming Mechanism of Single Point Incremental Forming (SPIF) by Splitting Plastic Energy Dissipation

scientific article published in 2017

Ring Rolling of Pre-forms Made by Wire-arc Additive Manufacturing

scientific article published in 2020

Robot Controlled Rotary Peen Forming by Laser-Assisted Distance Control

scientific article published on 10 July 2015

Rule-Based Path Identification for Direct Energy Deposition

scientific article published in 2020

Schüttgutklebtechnologie

scientific article published on 27 March 2017

Shot peen forming of fiber metal laminates on the example of GLARE®

scientific article published on 6 June 2013

Simulation of residual stresses and their impact on geometrical accuracy in incremental sheet metal forming

scholarly article

Single point incremental forming: state-of-the-art and prospects

scientific article published on 29 December 2017

Smoothed Particle Hydrodynamics Modeling of the Multi-layer Laser Powder Bed Fusion Process

scientific article published in 2022

Special Issue on Artificial Intelligence in Advanced Manufacturing Processes (AiAMP)

scientific article published in August 2022

Stability of phase transformation models for Ti-6Al-4V under cyclic thermal loading imposed during laser metal deposition

scientific article published in 2018

Stable honeycomb structures and temperature based trajectory optimization for wire-arc additive manufacturing

scientific article published on 14 September 2020

Stiffness management of sheet metal parts using laser metal deposition

scientific article published in 2017

Structural investigations of Fe-Zr-Si-Cu metallic glass with low glass-forming ability produced in laser powder bed fusion technology

scientific article published in November 2021

Study of the effect of heat treatment on fatigue crack growth behaviour of 316L stainless steel produced by selective laser melting

scientific article published on 27 December 2017

Surrogate model–based inverse parameter estimation in deep drawing using automatic knowledge acquisition

scientific article published on 4 August 2021

Targeted residual stress generation in single and two point incremental sheet forming (ISF)

scientific article published on 3 May 2021

Texture evolution in stainless steel processed by selective laser melting and annealing

scholarly article

The Precise Prediction of Rolling Forces in Heavy Plate Rolling Based on Inverse Modeling Techniques

scientific article published on 30 April 2014

Theoretical limits of the increase of radiative heat transfer by increased surface areas of radiant tubes

scientific article published in February 2021

Thermal Error Compensation Models Utilizing the Power Consumption of Machine Tools

scientific article published in 2023

Towards intelligent materials testing with reduced experimental effort for hot forming

scientific article published in 2017

Towards the damage evaluation using Gurson-Tvergaard-Needleman (GTN) model for hot forming processes

scientific article published in 2018

Towards the damage evolution for hot forming processes using Gurson-Tvergaard Needleman model – Coupled to dynamic recrystallization

scientific article published in 2019

Towards virtual deformation dilatometry for the design of hot stamping process

scientific article published in 2017

Ultra-short pulsed laser processing of single crystalline diamonds for tooling applications

scientific article published on 12 October 2023

Using Data Sampling and Inverse Optimization for the Reduction of the Experimental Effort in the Characterization of Hot Working Behaviour for a Case Hardening Steel

scientific article published on 10 July 2015

Using Vault Structure Steels to Improve the Lifetime of Radiant Tubes

scientific article published in 2020

Wire-arc additive manufacturing of pre-forms for forging of a Ti–6Al–4V turbine blade

scientific article published in 2019

Paulina is supported by:

About Paulina

Help