List of works - Erick Ogam

Acoustical modeling and Bayesian inference for rigid porous media in the low-mid frequency regime

scientific article published on 01 December 2018

Analysis of bone conducted sound over the cranial vault.

scientific article published on 11 September 2015

Analysis of the Acoustic Transcranial Bone Conduction

scientific article published in 2022

Analytical method for the ultrasonic characterization of homogeneous rigid porous materials from transmitted and reflected coefficients.

scientific article published in February 2010

Application of the Biot model to ultrasound in bone: inverse problem

scientific article published in July 2008

Bayesian inference for the ultrasonic characterization of rigid porous materials using reflected waves by the first interface

scientific article published on 01 July 2018

Characterization of compressed earth blocks using low frequency guided acoustic waves.

scientific article published on May 2016

Fabrication of capacitive acoustic resonators combining 3D printing and 2D inkjet printing techniques.

scientific article

Generalized equation for transient-wave propagation in continuous inhomogeneous rigid-frame porous materials at low frequencies

scientific article published on December 2013

Identification of the mechanical moduli of flexible thermoplastic thin films using reflected ultrasonic waves: Inverse problem.

scientific article published on 23 May 2017

Inkjet-Printed Membrane for a Capacitive Acoustic Sensor: Development and Characterization Using Laser Vibrometer.

scientific article

Measuring static thermal permeability and inertial factor of rigid porous materials (L) ⬇️

scientific article published on November 1, 2011

Measuring static viscous permeability of porous absorbing materials

scientific article published on 01 June 2014

Microstructural and Mechanical Properties of Binary Ti-Rich Fe⁻Ti, Al-Rich Fe⁻Al, and Ti⁻Al Alloys

scientific article published on 31 January 2019

Scattering of acoustic waves by macroscopically inhomogeneous poroelastic tubes ⬇️

scientific article published on July 1, 2012

Synthesis and Mechanical Characterization of Binary and Ternary Intermetallic Alloys Based on Fe-Ti-Al by Resonant Ultrasound Vibrational Methods.

scientific article

The direct and inverse problems of an air-saturated porous cylinder submitted to acoustic radiation ⬇️

scientific article published on September 1, 2010

Time-frequency analysis to detect bone fracture in impact biomechanics. Application to the thorax.

scientific article published on 18 June 2009

Transient Propagation of Spherical Waves in Porous Material: Application of Fractional Calculus

scientific article published in 2022

Transient ultrasound propagation in porous media using Biot theory and fractional calculus: application to human cancellous bone.

scientific article published in April 2013

Ultrasonic characterization of human cancellous bone using the Biot theory: inverse problem

scientific article published on 01 October 2006

List of works by Erick Ogam

Acoustical modeling and Bayesian inference for rigid porous media in the low-mid frequency regime

Analysis of bone conducted sound over the cranial vault.

Analysis of the Acoustic Transcranial Bone Conduction

Analytical method for the ultrasonic characterization of homogeneous rigid porous materials from transmitted and reflected coefficients.

Application of the Biot model to ultrasound in bone: inverse problem

Bayesian inference for the ultrasonic characterization of rigid porous materials using reflected waves by the first interface

Characterization of compressed earth blocks using low frequency guided acoustic waves.

Fabrication of capacitive acoustic resonators combining 3D printing and 2D inkjet printing techniques.

Generalized equation for transient-wave propagation in continuous inhomogeneous rigid-frame porous materials at low frequencies

Identification of the mechanical moduli of flexible thermoplastic thin films using reflected ultrasonic waves: Inverse problem.

Inkjet-Printed Membrane for a Capacitive Acoustic Sensor: Development and Characterization Using Laser Vibrometer.

Measuring static thermal permeability and inertial factor of rigid porous materials (L) ⬇️

Measuring static viscous permeability of porous absorbing materials

Microstructural and Mechanical Properties of Binary Ti-Rich Fe⁻Ti, Al-Rich Fe⁻Al, and Ti⁻Al Alloys

Scattering of acoustic waves by macroscopically inhomogeneous poroelastic tubes ⬇️

Synthesis and Mechanical Characterization of Binary and Ternary Intermetallic Alloys Based on Fe-Ti-Al by Resonant Ultrasound Vibrational Methods.

The direct and inverse problems of an air-saturated porous cylinder submitted to acoustic radiation ⬇️

Time-frequency analysis to detect bone fracture in impact biomechanics. Application to the thorax.

Transient Propagation of Spherical Waves in Porous Material: Application of Fractional Calculus

Transient ultrasound propagation in porous media using Biot theory and fractional calculus: application to human cancellous bone.

Ultrasonic characterization of human cancellous bone using the Biot theory: inverse problem