List of works - Liane Häußler

Alkoxide-Initiated Regioselective Coupling of Carbon Disulfide and Terminal Epoxides for the Synthesis of Strongly Alternating Copolymers

Alternating block copolymers based on polyamide-12 and polycaprolactone

Biobased Aliphatic Polyesters with DOPO Substituents for Enhanced Flame Retardancy

Blends of different linear polyamides with hyperbranched aromatic AB2 and A2+ B3 polyesters

Bulk and Surface Properties of Maleimide Copolymers: Effect of Fluorinated Side Chains

Characterization of Electron Beam Irradiated Polypropylene: Influence of Irradiation Temperature on Molecular and Rheological Properties

scientific article from 2006

Comparison of tensile, thermal, and thermo-mechanical properties of polyester filaments having different cross-sectional shape

scientific article from 2009

Comparison of the Molecular Properties and Morphology of Polypropylenes Irradiated under Different Atmospheres and after Annealing

scientific article from 2006

Controlled homo- and copolymerization of propene and 1-undecene catalyzed by post-metallocenes

Determination of the glass transition temperature in thin polymeric films used for microelectronic packaging by temperature-dependent spectroscopic ellipsometry

scientific article from 2017

Effect of the degree of branching on the glass transition temperature of polyesters

scientific article from 2012

End-functionalized polystyrene by ATRP: A facile approach to primary amino and carboxylic acid terminal groups

Enhanced thermal stability of polychloroprene rubber composites with ionic liquid modified MWCNTs

Extremely High Molar Mass Hyperbranched Poly(arylene ether)s from a New Semifluorinated AB2Monomer by an Unusual AB2+ A2Polymerization Approach

Hollow Poly(3-hydroxybutyrate) Fibers Produced by Melt Spinning

scientific article from 2010

In-situ imidization analysis in microscale thin films of an ester-type photosensitive polyimide for microelectronic packaging applications

Influence of Semiconductor Thickness and Molecular Weight on the Charge Transport of a Naphthalenediimide-Based Copolymer in Thin-Film Transistors

scientific article published on 17 March 2015

Influence of multiwall carbon nanotubes on the mechanical properties and unusual crystallization behavior in melt-mixed co-continuous blends of polyamide6 and acrylonitrile butadiene styrene

scholarly article in Polymer Engineering and Science, vol. 49 no. 8, August 2009

Influence of small scale melt mixing conditions on electrical resistivity of carbon nanotube-polyamide composites

scientific article from 2009

Influence of talc with different particle sizes in melt-mixed LLDPE/MWCNT composites

Influence of twin-screw extrusion conditions on the dispersion of multi-walled carbon nanotubes in a poly(lactic acid) matrix

scientific article from 2008

Intercalation of Mg–Al layered double hydroxide by anionic surfactants: Preparation and characterization

scientific article from 2008

Investigation of liquid sensing mechanism of poly(lactic acid)/multi-walled carbon nanotube composite films

scholarly article by Kazufumi Kobashi et al published 3 February 2009 in Smart Materials and Structures

Ionic Complexes of Bis(hydroxyarylidene)alkanones with Strong Polymeric Bases as a New Class of Third-Order Nonlinear Optical Chromophores

scientific article from 2001

Ionic Interactions in Blends of Polyamidines and Proton Donor Terminated Poly(alkylene ether)s

scientific article from 2005

Liquid sensing properties of fibres prepared by melt spinning from poly(lactic acid) containing multi-walled carbon nanotubes

scientific article (publication date: February 2010)

Long-chain branching of polypropylene by electron-beam irradiation in the molten state

scientific article from 2006

Melt spinning of bacterial aliphatic polyester using reactive extrusion for improvement of crystallization

scientific article published on 01 June 2007

Melt spinning of poly(3-hydroxybutyrate) fibers for tissue engineering using alpha-cyclodextrin/polymer inclusion complexes as the nucleation agent

scientific article published in September 2006

Melt spinning of poly(3-hydroxybutyrate) for tissue engineering using electron-beam-irradiated poly(3-hydroxybutyrate) as nucleation agent

scientific article published in May 2008

Methacrylate Copolymers with Liquid Crystalline Side Chains for Organic Gate Dielectric Applications

scientific article

Modification with alkyl chains and the influence on thermal and mechanical properties of aromatic hyperbranched polyesters

scientific article from 2000

Molecular dynamics in fluorinated side-chain maleimide copolymers as studied by broadband dielectric spectroscopy

article

Multiblock copolymers of L-lactide and trimethylene carbonate

scientific article published in January 2005

Multifunctional Coupling Agents: 3. Segmented Block Copolymers Based on Carboxy-Terminated Poly(propylene oxide) and Amino-Terminated Polyamide 12

Multiwalled Carbon Nanotubes Produced by a Continuous CVD Method and Their Use in Melt Mixed Composites with Polycarbonate

New Fluorinated Poly(imide siloxane) Random and Block Copolymers with Variation of Siloxane Loading

New Semifluorinated Siloxane-Grafted Copolyimides: Synthesis and Comparison with Their Linear Analogs

Novel graft copolymers with aliphatic polyether and polyester main chains

article published in 2015

One-Pot Synthesis of All-Conjugated Block-Like Bisthiophene–Naphthalenediimide/Fluorene Copolymer

One-step synthesis of organic LDH and its comparison with regeneration and anion exchange method

scientific article from 2009

Phase separation and surface properties of poly(propyl methacrylate-b-methyl methacrylate) diblock copolymers

scientific article from 2019

Phosphorus-Containing Polymer Flame Retardants for Aliphatic Polyesters

scientific article from 2018

Preparation and properties of nanocomposites based on PS-b-(PS/PB)-b-PS triblock copolymer by controlling the size of silica nanoparticles with electron beam irradiation

Properties of Segmented Block Copolymers in PEEK/PSU Blends

Reactive Compatibilization of Melt Mixed PA6/SWNT Composites: Mechanical Properties and Morphology

Semifluorinated PMMA Block Copolymers: Synthesis, Nanostructure, and Thin Film Properties

Styrene maleic anhydride copolymer mediated dispersion of single wall carbon nanotubes in polyamide 12: Crystallization behavior and morphology

Synthesis and Characterization of Comb-Like Copolymers Based on Poly(e-caprolactone) and Poly(a-olefin)

scientific article from 2014

Synthesis and Characterization of Hyperbranched Poly(arylene ether)s from a New Activated Trifluoro B3 Monomer Adopting an A2 + B3 Approach

Synthesis and Characterization of Poly(ether amide) Dendrimers Containing Different Core Molecules

Synthesis and Phase Separation Behaviour of High Performance Multiblock Copolymers

scientific article from 2016

Synthesis and characterization of fluorinated poly(imide siloxane) block copolymers

Synthesis and characterization of new pH- and thermo-responsive hydrogels based on N-isopropylacrylamide and 2-oxazolines

Synthesis of Boc protected block copolymers based on para-hydroxystyrene via NMRP

Synthesis of Partially Protected Block Copolymers Based on 4-Hydroxystyrene Using NMRP and a Sequence of Polymer Analogous Reactions

Synthesis of nanocomposites by in situ metallocene-catalyzed polymerization of propene

article published in 2015

Synthesis of polymeric ionic liquids with unidirectional chain topology by AB step growth polymerization

article by M. Suckow et al published February 2017 in Polymer

Tailoring of polymer properties in segmented block copolymers

scientific article from 2001

Temperature-dependent FTIR spectroscopic and thermoanalytic studies of hydrogen bonding of hydroxyl (phenolic group) terminated hyperbranched aromatic polyesters

List of works by Liane Häußler

Alkoxide-Initiated Regioselective Coupling of Carbon Disulfide and Terminal Epoxides for the Synthesis of Strongly Alternating Copolymers

Alternating block copolymers based on polyamide-12 and polycaprolactone

Biobased Aliphatic Polyesters with DOPO Substituents for Enhanced Flame Retardancy

Blends of different linear polyamides with hyperbranched aromatic AB2 and A2+ B3 polyesters

Bulk and Surface Properties of Maleimide Copolymers: Effect of Fluorinated Side Chains

Characterization of Electron Beam Irradiated Polypropylene: Influence of Irradiation Temperature on Molecular and Rheological Properties

Comparison of tensile, thermal, and thermo-mechanical properties of polyester filaments having different cross-sectional shape

Comparison of the Molecular Properties and Morphology of Polypropylenes Irradiated under Different Atmospheres and after Annealing

Controlled homo- and copolymerization of propene and 1-undecene catalyzed by post-metallocenes

Determination of the glass transition temperature in thin polymeric films used for microelectronic packaging by temperature-dependent spectroscopic ellipsometry

Effect of the degree of branching on the glass transition temperature of polyesters

End-functionalized polystyrene by ATRP: A facile approach to primary amino and carboxylic acid terminal groups

Enhanced thermal stability of polychloroprene rubber composites with ionic liquid modified MWCNTs

Extremely High Molar Mass Hyperbranched Poly(arylene ether)s from a New Semifluorinated AB2Monomer by an Unusual AB2+ A2Polymerization Approach

Hollow Poly(3-hydroxybutyrate) Fibers Produced by Melt Spinning

In-situ imidization analysis in microscale thin films of an ester-type photosensitive polyimide for microelectronic packaging applications

Influence of Semiconductor Thickness and Molecular Weight on the Charge Transport of a Naphthalenediimide-Based Copolymer in Thin-Film Transistors

Influence of multiwall carbon nanotubes on the mechanical properties and unusual crystallization behavior in melt-mixed co-continuous blends of polyamide6 and acrylonitrile butadiene styrene

Influence of small scale melt mixing conditions on electrical resistivity of carbon nanotube-polyamide composites

Influence of talc with different particle sizes in melt-mixed LLDPE/MWCNT composites

Influence of twin-screw extrusion conditions on the dispersion of multi-walled carbon nanotubes in a poly(lactic acid) matrix

Intercalation of Mg–Al layered double hydroxide by anionic surfactants: Preparation and characterization

Investigation of liquid sensing mechanism of poly(lactic acid)/multi-walled carbon nanotube composite films

Ionic Complexes of Bis(hydroxyarylidene)alkanones with Strong Polymeric Bases as a New Class of Third-Order Nonlinear Optical Chromophores

Ionic Interactions in Blends of Polyamidines and Proton Donor Terminated Poly(alkylene ether)s

Liquid sensing properties of fibres prepared by melt spinning from poly(lactic acid) containing multi-walled carbon nanotubes

Long-chain branching of polypropylene by electron-beam irradiation in the molten state

Melt spinning of bacterial aliphatic polyester using reactive extrusion for improvement of crystallization

Melt spinning of poly(3-hydroxybutyrate) fibers for tissue engineering using alpha-cyclodextrin/polymer inclusion complexes as the nucleation agent

Melt spinning of poly(3-hydroxybutyrate) for tissue engineering using electron-beam-irradiated poly(3-hydroxybutyrate) as nucleation agent

Methacrylate Copolymers with Liquid Crystalline Side Chains for Organic Gate Dielectric Applications

Modification with alkyl chains and the influence on thermal and mechanical properties of aromatic hyperbranched polyesters

Molecular dynamics in fluorinated side-chain maleimide copolymers as studied by broadband dielectric spectroscopy

Multiblock copolymers of L-lactide and trimethylene carbonate

Multifunctional Coupling Agents: 3. Segmented Block Copolymers Based on Carboxy-Terminated Poly(propylene oxide) and Amino-Terminated Polyamide 12

Multiwalled Carbon Nanotubes Produced by a Continuous CVD Method and Their Use in Melt Mixed Composites with Polycarbonate

New Fluorinated Poly(imide siloxane) Random and Block Copolymers with Variation of Siloxane Loading

New Semifluorinated Siloxane-Grafted Copolyimides: Synthesis and Comparison with Their Linear Analogs

Novel graft copolymers with aliphatic polyether and polyester main chains

One-Pot Synthesis of All-Conjugated Block-Like Bisthiophene–Naphthalenediimide/Fluorene Copolymer

One-step synthesis of organic LDH and its comparison with regeneration and anion exchange method

Phase separation and surface properties of poly(propyl methacrylate-b-methyl methacrylate) diblock copolymers

Phosphorus-Containing Polymer Flame Retardants for Aliphatic Polyesters

Preparation and properties of nanocomposites based on PS-b-(PS/PB)-b-PS triblock copolymer by controlling the size of silica nanoparticles with electron beam irradiation

Properties of Segmented Block Copolymers in PEEK/PSU Blends

Reactive Compatibilization of Melt Mixed PA6/SWNT Composites: Mechanical Properties and Morphology

Semifluorinated PMMA Block Copolymers: Synthesis, Nanostructure, and Thin Film Properties

Styrene maleic anhydride copolymer mediated dispersion of single wall carbon nanotubes in polyamide 12: Crystallization behavior and morphology

Synthesis and Characterization of Comb-Like Copolymers Based on Poly(e-caprolactone) and Poly(a-olefin)

Synthesis and Characterization of Hyperbranched Poly(arylene ether)s from a New Activated Trifluoro B3 Monomer Adopting an A2 + B3 Approach

Synthesis and Characterization of Poly(ether amide) Dendrimers Containing Different Core Molecules

Synthesis and Phase Separation Behaviour of High Performance Multiblock Copolymers

Synthesis and characterization of fluorinated poly(imide siloxane) block copolymers

Synthesis and characterization of new pH- and thermo-responsive hydrogels based on N-isopropylacrylamide and 2-oxazolines

Synthesis of Boc protected block copolymers based on para-hydroxystyrene via NMRP

Synthesis of Partially Protected Block Copolymers Based on 4-Hydroxystyrene Using NMRP and a Sequence of Polymer Analogous Reactions

Synthesis of nanocomposites by in situ metallocene-catalyzed polymerization of propene

Synthesis of polymeric ionic liquids with unidirectional chain topology by AB step growth polymerization

Tailoring of polymer properties in segmented block copolymers

Temperature-dependent FTIR spectroscopic and thermoanalytic studies of hydrogen bonding of hydroxyl (phenolic group) terminated hyperbranched aromatic polyesters

Thermal degradation behaviors of a novel nanocomposite based on polypropylene and Co–Al layered double hydroxide

Thermal properties and crystalline structure of poly(10-undecene-1-ol)

Ultralow percolation threshold in polyamide 6.6/MWCNT composites