Search filters

List of works by John Neil Waddell

A comparison of fit of CNC-milled titanium and zirconia frameworks to implants.

scientific article

A novel in vitro approach to assess the fit of implant frameworks

scientific article published on 06 October 2010

Additive Technology: Update on Current Materials and Applications in Dentistry

scientific article

Adhesion of porcelain to three-dimensionally printed and soft milled cobalt chromium

scientific article published on 24 June 2019

Adhesive evaluation of three types of resilient denture liners bonded to heat-polymerized, autopolymerized, or CAD-CAM acrylic resin denture bases

scientific article published on 29 June 2018

An Investigation Of The Causes Of Clinical Failure Of Soldered Bar Attachment Systems In Implant Supported Overdentures ⬇️

2012 doctoral thesis by John Neil Waddell at University of Otago

Biomechanical investigation of impact induced rib fractures of a porcine infant surrogate model.

scientific article published on 27 May 2016

Bond Strength between CAD/CAM PMMA Denture Base Resins and Characterisation Composites

Clinical tooth preparations and associated measuring methods: a systematic review.

scientific article

Comparison of the microstructure and phase stability of as-cast, CAD/CAM and powder metallurgy manufactured Co-Cr dental alloys.

scientific article published on 17 November 2015

Continuous measurement of intra-oral pH and temperature: development, validation of an appliance and a pilot study.

scientific article published on 21 March 2015

Convergence angles and margin widths of tooth preparations by New Zealand dental students

scientific article published in March 2016

Coordinate geometry method for capturing and evaluating crown preparation geometry.

scientific article published on 24 March 2014

Cracking of porcelain surfaces arising from abrasive grinding with a dental air turbine.

scientific article

Curing through Ceramics: Influence of Different Light-Curing Units and Curing Modes on Bond Strength

Denture–Mucosa Pressure Distribution and Pressure–Pain Threshold in In Vivo, In Vitro and In Silico Studies: A Literature Review

Development of a skull/brain model for military wound ballistics studies.

scientific article published on 7 September 2014

Effect of autoclave induced low-temperature degradation on the adhesion energy between yttria-stabilized zirconia veneered with porcelain

scientific article published on 02 September 2013

Elastic behavior of brain simulants in comparison to porcine brain at different loading velocities.

scientific article published on 24 October 2017

Estimation of jaw-opening forces in adults.

scientific article published on 28 December 2017

Experimental simulation of non-ballistic wounding by sharp and blunt punches

scientific article published on 14 May 2008

Fabrication of a self-retaining surgical template for surgical placement of dental implants for the partially edentulous patient.

scientific article

Fibre-reinforced and repaired PMMA denture base resin: Effect of placement on the flexural strength and load-bearing capacity

Finite element models and material data for analysis of infant head impacts

scientific article published on 08 December 2018

Gunshot residue preservation in seawater.

scientific article

Influence of a tungsten metal conditioner on the adhesion and residual stress of porcelain bonded to cobalt-chromium alloy.

scientific article published on 14 March 2014

Influence of surface penetration on measured fluid force on a hand model

scientific article published on 18 November 2008

Influence of the bonder on the adhesion of porcelain to machined titanium as determined by the strain energy release rate

scientific article published on 14 August 2006

Influence of water, loading rate and bonder on the adhesion of porcelain to titanium.

scientific article published on 4 January 2006

Intraoral pH and temperature during sleep with and without mouth breathing.

scientific article published on 15 December 2015

Investigation of dental alginate and agar impression materials as a brain simulant for ballistic testing.

scientific article published on 11 April 2016

Investigation of dental materials as skin simulants for forensic skin/skull/brain model impact testing.

scientific article published on 5 October 2015

Investigation of the elastic modulus, tensile and flexural strength of five skull simulant materials for impact testing of a forensic skin/skull/brain model

scientific article published on 20 February 2017

Measuring intraoral pressure: adaptation of a dental appliance allows measurement during function

scientific article published on 13 November 2007

Mechanical properties of the human scalp in tension

scientific article published on 17 May 2018

Physical and metallurgical considerations of failures of soldered bars in bar attachment systems for implant overdentures: a review of the literature.

scientific article published on October 2006

Porcelain bonding to novel Co-Cr alloys: Influence of interfacial reactions on phase stability, plasticity and adhesion

scientific article published on 23 September 2016

Pressed ceramics onto zirconia. Part 2: indentation fracture and influence of cooling rate on residual stresses.

scientific article published on 9 September 2011

Quantification of subconcussive impact forces to the head using a forensic model.

scientific article published on 3 March 2015

Reporting numeric values of complete crowns. Part 1: Clinical preparation parameters.

scientific article published on 7 April 2015

Reporting numeric values of complete crowns. Part 2: Retention and resistance theories

scientific article published on 7 April 2015

Scalp simulation - A novel approach to site-specific biomechanical modeling of the skin

scientific article published on 18 September 2017

Simulating backspatter of blood from cranial gunshot wounds using pig models.

scientific article published on 9 July 2015

Spark anodization of titanium-zirconium alloy: surface characterization and bioactivity assessment

scientific article published on 11 August 2015

Surface Characteristics and Biofilm Development on Selected Dental Ceramic Materials

scientific article published on 8 May 2017

The deer femur - a morphological and biomechanical animal model of the human femur

scientific article published on 1 January 2014

The influence of opaque application methods on the bond strength and final shade of PFM restorations.

scientific article published in January 2010

The influence of undercut depths on the accuracy of casts poured from irreversible hydrocolloid impression materials

scientific article published on 14 January 2020

Tongue pressure patterns during water swallowing.

scientific article published on 30 June 2009

Use of agar/glycerol and agar/glycerol/water as a translucent brain simulant for ballistic testing

scientific article published on 28 September 2016

Using a motion-capture system to record dynamic articulation for application in CAD/CAM software.

scientific article published on 14 September 2009

Paulina is supported by:

About Paulina

Help