A New Analytical Method for Calculating Subsidence Resulting by Fluid Withdrawal from Disk-Shaped Confined Aquifers

A hydro-mechanical semi-analytical framework for hollow cylinder sanding tests

A hydrodynamic model for analyzing the closure stresses in the wellbore strengthening problem

A novel methodology for synthesizing the wetting capillary pressure curve of rocks through sorptivity data

A working model for estimating CO2-induced uplift of cap rocks under different flow regimes in CO2 sequestration

Approximate Solutions for Horizontal Unconfined Aquifers in the Buildup Phase

scientific article published on 2 April 2024

Colloidal properties of polymer amended Cyprus bentonite for water-based drilling fluid applications

scientific article published in February 2024

Constraining the in-situ stresses in a tectonically active offshore basin in Eastern Mediterranean

Dynamic thermal aging of water-based drilling fluids with different types of low-rank coals as environmental friendly shear thinning additives

Erratum to “On the conical indentation response of elastic auxetic materials: Effects of Poisson's ratio, contact friction and cone angle” [Int. J. Solids Struct. 81 (2016) 33–42]

correction of a scholarly article

Evaluation of a Thermal Consolidation Process for the Production of Enhanced Technical Fabrics

Finite element modeling of nanoindentation on C–S–H: Effect of pile-up and contact friction

Flow Regime Analysis of the Pressure Build-Up during CO2 Injection in Saturated Porous Rock Formations

Hydro-mechanical erosion models for sand production

article

Modeling of Hydraulic Fracturing in a Poroelastic Cohesive Formation

Numerical modeling of fluid-driven fractures in cohesive poroelastoplastic continuum

On certain singular integral equations arising in the analysis of wellbore recharge in anisotropic formations

On the conical indentation response of elastic auxetic materials: Effects of Poisson's ratio, contact friction and cone angle

scholarly article

On the stress dependency of sand production coefficient in hydro-dynamical sanding criteria

scientific article published in 2023

The influence of pumping parameters in fluid-driven fractures in weak porous formations

The influence of the cohesive process zone in hydraulic fracturing modelling