Search filters

List of works by Kathy Simmons

A Computational Fluid Dynamics Simulation of Oil–Air Flow Between the Cage and Inner Race of an Aero-engine Bearing

A Computational Investigation Into the Effects of Inlet Swirl on a Shrouded Spiral Bevel Gear

A Numerical Model for Oil Film Flow in an Aeroengine Bearing Chamber and Comparison to Experimental Data

scientific article published in March 2004

A numerical study of wave structures developed on the free surface of a film flowing on inclined planes and subjected to surface shear

scientific article published in 2006

A parametric study of filtration through a ceramic candle filter

scientific article published in February 2005

A study of droplet impact on static films using the BB-LIF technique

CFD Investigation Into Oil/Air Behaviour Near a Shrouded Spiral Bevel Gear

scientific article published on 16 June 2014

CFD and PIV Investigation of Flow past a Single Hot Gas Filter

scientific article published in March 2006

Comparison of Computational Fluid Dynamics and Particle Image Velocimetry Data for the Airflow in an Aeroengine Bearing Chamber

scientific article published in March 2004

Computational Investigation of Flows and Pressure Fields Associated With Spur Gear Meshing

Computational Investigation of Torque on Coaxial Rotating Cones

scientific article published in June 2008

Computational Investigation of the Airflow Through a Shrouded Bevel Gear

scientific article published in January 2005

Computational Study of a Customised Shallow-Sump Aero-Engine Bearing Chamber With Inserts to Improve Oil Residence Volume

scientific article published on 26 June 2017

Effect of Pressure and Oil Mist on Windage Power Loss of a Shrouded Spiral Bevel Gear

scientific article published on 29 June 2012

Effect of Pressure and Oil Mist on Windage Power Loss of a Shrouded Spiral Bevel Gear

scientific article published in January 2011

Effect of Turbulence Damping in VOF Simulation of an Aero-Engine Bearing Chamber

Effect of Variations in Shroud Geometry on Single Phase Flow Over a Shrouded Single Spiral Gear

scientific article published in January 2008

Evaluation of the SST-SAS Model for Prediction of Separated Flow Inside Turbine Internal Cooling Passages

scientific article published on 13 June 2016

Experimental Investigation Into Crater Morphology for Droplets Impinging on a Moving Film

scientific article published on 26 June 2017

Experimental Investigation Into Droplet Impingement Upon Moving Films Using High Speed Video and Thermal Imaging

scientific article published on 13 November 2015

Experimental Investigation Into Windage Power Loss From a Shrouded Spiral Bevel Gear

scientific article published in January 2007

Experimental Investigation Into the Performance of Shallow Aeroengine Off-Takes

scientific article published on 16 June 2014

Factors Affecting Oil Removal From an Aeroengine Bearing Chamber

scientific article published on 10 October 2010

Film Flow Around Bearing Chamber Support Structures

scientific article published in January 2005

Innovative Shallow Sump Customizations for Aero-Engine Bearing Chambers

scientific article published on 13 June 2016

Liquid and Gas Flow Behaviour in Highly Rotating Environment

scientific article published in January 2011

Mechanisms for Residence Volume Reduction in Shallow Sump

scientific article published on 17 October 2017

Modelling windage power loss from an enclosed spur gear

scientific article published in May 2007

Numerical Modeling of In-Flight Characteristics of Inconel 625 Particles During High-Velocity Oxy-Fuel Thermal Spraying

Numerical Study of the Two-Phase Air/Oil Flow Within an Aero-Engine Bearing Chamber Model Using a Coupled Lagrangian Droplet Tracking Method

scientific article published in January 2002

Oil Scoop Simulation and Analysis Using CFD and SPH

Oil-Air Flow Between the Cage and Inner Race of an Aeroengine Bearing

Particulate deposition on candle filters

scientific article published in February 2001

Performance Comparison for Aeroengine-Type Sump Geometries

scientific article published on 15 November 2013

Prediction of air/oil exit flows in a commercial aero-engine bearing chamber

scientific article published in March 2006

Study of Gas/Liquid Behavior Within an Aeroengine Bearing Chamber

scientific article published on 18 April 2013

Study of Gas/Liquid Behaviour Within an Aeroengine Bearing Chamber

scientific article published on 11 June 2012

Study of aero-engine oil-air separators

scientific article published on 14 October 2006

The Application of CFD to Model Windage Power Loss From a Spiral Bevel Gear

scientific article published in January 2007

The Effect of Initial Injection Conditions on the Oil Droplet Motion in a Simplified Bearing Chamber

scientific article published on 13 December 2007

Transient Two-Phase Effects in an Aeroengine Bearing Chamber Scavenge Test Rig

scientific article published on 14 November 2014

Two Phase CFD Modelling of a Spiral Bevel Gear Using Particle Injections and a Wall Film Model

Two Phase Computational Study of Flow Behaviour in a Region Within an Aeroengine Gearbox

article published in 2014

Two-Phase Computational Modelling of a Spiral Bevel Gear Using a Eulerian Multiphase Model

Using CFD to Improve Aero-Engine Air/Oil Separator Design

scientific article published in January 2002

Velocity Measurements in the Vicinity of the Exit and Inlet of a Spiral Bevel Gear Shroud

scientific article published on 15 June 2015

Windage Power Losses From Spiral Bevel Gears With Varying Oil Flows and Shroud Configurations

scientific article published on 13 July 2009

Windage Power Losses From Spiral Bevel Gears With Varying Oil Flows and Shroud Configurations

scientific article published in January 2008