A Commercial Clay-Based Material as a Carrier for Targeted Lysozyme Delivery in Animal Feed

scientific article published on 17 November 2023

Accounting for transportation impacts in the environmental assessment of waste management plans

Adsorption of nitrobenzene and orthochlorophenol on dimethyl ditallowyl montmorillonite: A microstructural and thermodynamic study

Analysis and Compensation of PEM Fuel Cell Instabilities in Low-Frequency EIS Measurements

Analysis of the electrical behaviour of conductor/insulator composites using effective medium theories

Biogas-fed solid oxide fuel cell (SOFC) coupled to tri-reforming process: Modelling and simulation

Carbonate coprecipitation synthesis of Sr- and Mg-doped LaGaO3

Cement-clay pastes for stabilization/solidification of 2-chloroaniline

scientific article published in January 2004

Characterisation of Nanocarbon-Based Gas Diffusion Media by Electrochemical Impedance Spectroscopy

Characterization of (1−x) La0.83Sr0.17Ga0.83Mg0.17O2.83−xLa0.8Sr0.2MnO3 (0≤x≤1) composite cathodes

Chemistry and microstructure of cement pastes admixed with organic liquids

Chemistry of cement hydration in polymer-modified pastes containing lead compounds

Co-precipitation in aqueous medium of La0.8Sr0.2Ga0.8Mg0.2O3−δ via inorganic precursors

Co-precipitation synthesis of SOFC electrode materials

Cobalt based layered perovskites as cathode material for intermediate temperature Solid Oxide Fuel Cells: A brief review

scholarly article by Renato Pelosato et al published December 2015 in Journal of Power Sources

Combining Electrical and Pressure Measurements for Early Flooding Detection in a PEM Fuel Cell

Comparative life cycle assessment of asphalt pavements using reclaimed asphalt, warm mix technology and cold in-place recycling

article

Comparison between electrical and pressure measurements to detect PEM fuel cell flooding

Composite materials as electrolytes for solid oxide fuel cells: simulation of microstructure and electrical properties

Conductivity and superhydrophobic effect on PFPE-modified porous carbonaceous materials

Design Approach for the Development of the Flow Field of Bipolar Plates for a PEMFC Stack Prototype

article

Design of a sustainable packaging in the food sector by applying LCA

Design of properties and performances of innovative gas diffusion media for polymer electrolyte membrane fuel cells

Development and Characterization of Non-Conventional Micro-Porous Layers for PEM Fuel Cells

article

Development of an optimal gas diffusion medium for polymer electrolyte membrane fuel cells and assessment of its degradation mechanisms

article

Diagnosis of PEM Fuel Cell Drying and Flooding Based on Power Converter Ripple

Discussion of critical measurement issues of impedance spectroscopy on PEM fuel cells

Effect of Microporous Layer (MPL) on Water Management Investigated by Electrochemical Impedance Spectroscopy (EIS) on a Running PEM-FC

article published in 2010

Effect of different substrates, inks composition and rheology on coating deposition of microporous layer (MPL) for PEM-FCs

article

Effect of rheology controller agent addition to Micro-Porous Layers on PEMFC performances

article

Electrical Characterization of GDL Materials for Polymer Fuel Cells (PEMFC)

Electrical Characterization of LSGM Electrolytes Synthesized via Co-precipitation Route

Electrical Performance of PEM Fuel Cells With Different Gas Diffusion Layers

article published in 2011

Electrical behaviour of LSGM–LSM composite cathode materials

Electrical characterization of co-precipitated LaBaCo2O5+δ and YBaCo2O5+δ oxides

Electricity Generation in LCA of Electric Vehicles: A Review

article

Energy and environmental assessment of industrial hemp for building applications: A review

Environmental impacts of natural and conventional building materials: a case study on earth plasters

Evaluation of Ba deficient NdBaCo2O5+δ oxide as cathode material for IT-SOFC

Experimental Characterization of Polymer Surfaces Subject to Corona Discharges in Controlled Atmospheres

scientific article published on 10 October 2019

Holistic Approach for Assessing Buildings’ Environmental Impact and User Comfort from Early Design: A Method Combining Life Cycle Assessment, BIM, and Active House Protocol

scientific article published in 2023

Hybrid Organo–Inorganic Clay with Nonionic Interlayers. Mid- and Near-IR Spectroscopic Studies

IS α-Al2O3/ La0.8Sr0.2Ga0.8Mg0.2O3–δ really a new ionic conductor composite?really a new ionic conductor composite?

Immobilization of organic pollutants in cement pastes admixed with organophilic materials

scientific article published in December 2008

Impedance spectra simulation of yttria-stabilised zirconia/alumina composites

Influence of Carbon Cloth GDLs on Electrochemical Performance of PEMFCs

Intercalation of poly(ethylene-oxides) in montmorillonite: Tailor-made nanocontainers for drug delivery systems

Interlayer expansion of dimethyl ditallowylammonium montmorillonite as a function of 2-chloroaniline adsorption

Investigation of gas diffusion layer compression by electrochemical impedance spectroscopy on running polymer electrolyte membrane fuel cells

Investigation of hydrophobic treatments with perfluoropolyether derivatives of gas diffusion layers by electrochemical impedance spectroscopy in PEM-FC

Investigation of nanostructures in ordinary Portland cement through positron annihilation lifetime spectroscopy

LA-ICP-MS and EDS characterization of electrode/electrolyte interfaces in IT-SOFC materials

Life cycle assessment of hemp cultivation and use of hemp-based thermal insulator materials in buildings

Long-term leaching test of organo-contaminated cement-clay pastes.

scientific article

Low-Cost PEM Fuel Cell Diagnosis Based on Power Converter Ripple With Hysteresis Control

Matrix optimisation for hazardous organic waste sorption

Model analysis of bonding in the alkali halide molecules

Modeling and Parametric Study of a Single Solid Oxide Fuel Cell by Finite Element Method

Modelling and simulation of the mechanical properties of YSZ/Al2O3 composites: a preliminary study

Novel superhydrophobic microporous layers for enhanced performance and efficient water management in PEM fuel cells

On the crystal structure problem for heavy rare-gas solids: A three-atom exchange perturbation analysis

Operative conditions effect on PEM-FC performance by in-situ and ex-situ analysis of gas diffusion media with different bulk textile structure

article by Luca Omati et al published July 2011 in International Journal of Hydrogen Energy

PEM Fuel Cell Drying and Flooding Diagnosis With Signals Injected by a Power Converter

PEMFC system simulation in MATLAB-Simulink® environment

Perfluoropolyether-functionalized gas diffusion layers for proton exchange membrane fuel cells

Phase composition gradient in leached polluted cement monoliths

article

Physico-Mechanical Properties of Metal Matrix Self-Lubricating Composites Reinforced with Traditional and Nanometric Particles

scientific article published on 2 March 2022

Polyalkylphosphazenes as solid proton conducting electrolytes

Positron lifetime spectroscopy as a probe of nanoporosity of cement-based materials

Preparation,ex situandin situCharacterization of Gas Diffusion Media Containing and Non-Containing Carboxymethylcellulose for PEM Fuel Cells

Properties of cement–lime mortars vs. cement mortars containing recycled concrete aggregates

Proton conductivity of poly(dialkyl)phosphazenes–phosphoric acid composites at low humidity

Proton conductivity of poly(dipropyl)phosphazene-sulfonated poly[(hydroxy)propyl, phenyl]ether–HPO composite in dry environment

Surface treatments with perfluoropolyether derivatives for the hydrophobization of gas diffusion layers for PEM fuel cells

Synthesis of nanostructured perovskite powders via simple carbonate co-precipitation

Synthesis of organoclays using non-ionic surfactants: Effect of time, temperature and concentration

Testing of a diagnostic technique for a single PEM fuel cell based on a DC/DC converter

The Twelve Principles of Green Tribology: Studies, Research, and Case Studies—A Brief Anthology

scientific article published in 2022

The evolution of cement paste hydration process by impedance spectroscopy

Thermal characterization of a montmorillonite, modified with polyethylene-glycols (PEG1500 and PEG4000), by in situ HT-XRD and FT IR: Formation of a high-temperature phase

Thermal evolution of PEG-based and BRIJ-based hybrid organo-inorganic materials. FT-IR studies

Use of admixtures in organic-contaminated cement-clay pastes

scientific article published on 22 April 2008

Use of natural clays as sorbent materials for rare earth ions: Materials characterization and set up of the operative parameters

scientific article

Valence bond model analysis of alkali and halogen diatomics on the basis of exchange perturbation theory. Part 2. Heteronuclear compounds

Valence bond model analysis of alkali metal hydrides and hydrogen halides on the basis of exchange perturbation theory

Valence bond model analysis of homonuclear alkali and halogen diatomics on the basis of exchange perturbation theory