A Focus on Fire Fundamentals Including Emergency Response Training at the National Fire Agency in Taiwan

A study of the external and internal sites of MFI-type zeolitic materials through the FT-IR investigation of the adsorption of nitriles

article published in 2001

Ammonia Oxidation to Nitric Oxide Over Etched Metal Surfaces

Ammonia decomposition over 430-SS etched metal catalysts

An investigation on the catalytic properties of titania–silica materials

Bhopal Revisited

article

Bhopal's impact on the chemical industry

Big data is it a big deal?

Characterization and reactivity of MgxFe2-2xO3-2x and MgyZn1-yFe2O4 solid solution spinels prepared through the supercritical drying method

Characterization of Silica-Containing Aluminum Hydroxide and Oxide Aerogels ⬇️

scientific article published on June 15, 1997

Characterization of high-area Mg x Fe2O3+x (0 ?x ? 2) mono-phasic powders by vibrational spectropies

Chemistry and structure of mixed magnesium ferric oxide aerogels

scholarly article by R.J. Willey et al published June 1993 in Journal of Materials Research

Comment related to December 2014 PSP Bhopal articles

Comparison of kinetic models for atom recombination on high-temperature reusable surface insulation

Development and processing of aerogels in a windowed autoclave

Editorial

Editorial

Editorial

Editorial

Editorial

Editorial

Editorial

Editorial

Editorial

Effect of Pore Size Distribution of Commercial Activated Carbon Fabrics on the Adsorption of CWA Simulants from the Liquid Phase

Effect of Pore Structure on CO₂ Adsorption Characteristics of Aminopolymer Impregnated MCM-36.

scientific article

Effect of potassium adsorption on the photochemical properties of titania nanotube arrays

Effect of the Average Pore Size on the Adsorption Capacity and Off-Gassing Characteristics of Activated Carbon Fabrics for Decontamination of Surfaces

FT-IR study of the interaction of magnesium ferrite with SO2

scholarly article by Ermanno Astorino et al published 1994 in Catalysis Letters

FTIR studies on the selective oxidation and combustion of light hydrocarbns at metal oxide surfaces. Propane and propene oxidation on MgCr2O4

Ferrimagnetic zinc ferrite fine powders

Fifty Years of LPS and What Do We Have to Show for It?

First unseeded hydrothermal synthesis of microporous vanadosilicate AM-6

article published in 2009

Gas composition measurements in arc heated flowfields via mass spectrometry

article

INFRARED INVESTIGATION OF NiO-Al2O3 AEROGEL CATALYSTS FOR THE NITROXIDATION OF PROPENE TO NITRILES

Investigation of iron oxide-chromia-alumina aerogels for the selective catalytic reduction of nitric oxide by ammonia

Investigation of nickel oxide on alumina aerogel catalysts promoted with magnesia or iron oxide for nitroxidation of propylene into acrylo- and acetonitriles

scholarly article by M. Rahman et al published January 1988 in Applied catalysis

Layer of Protection Analysis

Low-temperature calorimetric properties of zinc ferrite nanoparticles

scientific article published on 01 October 1995

Mechanistic Aspects of Methanol Partial Oxidation over Supported Iron Oxide Aerogels

article published in 2001

Morphological characterization of etched metal catalysts

Mössbauer spectrometry study of magnesioferrite particles

N-terminal acetylation and protonation of individual hemoglobin subunits: position-dependent effects on tetramer strength and cooperativity

scientific article

Novel ways to present process safety concepts

Process Safety Progress is expanding its focus to other areas of the chemical process industries, such as the pharmaceutical industry, alternate energy technology, microchip manufacturing, and education

Process safety and a virus

scientific article published on 25 April 2020

Reactivity investigation of mixtures of propane and nitrous oxide

Reactivity of SiO2 aerogel activated by hydrogen spillover for the hydrogenation of ethylene and the cracking of cumene

Smartphones and process safety

Structural and magnetic characterization of aerogel-produced Ge0.5Fe2.5Oy nanoparticles

Structure and magnetic properties of magnesium ferrite fine powders

scholarly article by S.A. Oliver et al published December 1995 in Scripta Metallurgica et Materialia

TRANSIENT RESPONSE ANALYSIS IN THE DETERMINATION OF ADSORPTION RATE COEFFICIENTS FOR PROPYLENE AND NITRIC OXIDE ON NiO/Al203 AEROGEL CATALYSTS

Temperature dependent lattice distortion in aerogel-produced Fe–Mo oxides

The Bhopal tragedy: its influence on process and community safety as practiced in the United States

The Chem-E-Car competition and the integration of process safety management

article by Richard Zollars et al published March 2009 in Process Safety Progress

The accident in Bhopal: Observations 20 years later

The explosion in Tianjin, China, August 12, 2015

article

The integration of process safety into a chemical reaction engineering course: Kinetic modeling of the T2 incident

The safety and chemical engineering education committee-broadening the reach of chemical engineering process safety education

Thermo-kinetic analysis of reactions involved in the manufacture of o-nitroaniline

When innocence is lost

When it comes to ammonium nitrate, the initiator is free

Which sites are the active sites in TiO2–SiO2 mixed oxides?

Why major accidents are still occurring