Al2O3/Y-TZP and Y-TZP materials fabricated by stacking layers obtained by aqueous tape casting

Alkoxide-based precursors for direct drawing of metal oxide micro- and nanofibres

scientific article published on 28 June 2011

Alumina–zirconia layered ceramics fabricated by stacking water processed green ceramic tapes

Anode-supported microtubular cells fabricated with gadolinia-doped ceria nanopowders

Asymmetric supported dense lanthanum tungstate membranes

Cathode-supported hybrid direct carbon fuel cells

Ceria Based Composite Membranes for Oxygen Separation

Cold laser machining of nickel-yttrium stabilised zirconia cermets: Composition dependence

Comprehensive characterization of a cost-effective microbial fuel cell with Pt-free catalyst cathode and slip-casted ceramic membrane

Deposition Via Dip Coating Technique of Dense Yttrium Stabilized Zirconia Layers

Determination of mechanical properties of Al2O3/Y-TZP ceramic composites: Influence of testing method and residual stresses

Effect of B-site substitution on the stability of La0.2Sr0.8Fe0.8B0.2O3−, B = Al, Ga, Cr, Ti, Ta, Nb

Effect of iron oxide content and microstructural porosity on the performance of ceramic membranes as microbial fuel cell separators

Fabrication and Characterization of Graded Anodes for Anode-Supported Solid Oxide Fuel Cells by Tape Casting and Lamination

Fabrication and performance of a tubular ceria based oxygen transport membrane on a low cost MgO support

Forming of Ceramic Laminates Comprising Thin Layers of a Few Particles

Fracture of Monoliths Fabricated by Stacking Water Processed Green Ceramic Tapes

Graphite and PMMA as pore formers for thermoplastic extrusion of porous 3Y-TZP oxygen transport membrane supports

Hydrogen permeation in asymmetric La28 − W4 + O54 + 3/2 membranes

Indentation Damage and Residual Stress Field in Alumina-Y2O3-Stabilized Zirconia Composites

Influence of Porosity on R-Curve Behaviour of Tetragonal Stabilized Zirconia

Joining green ceramic tapes made from water-based slurries by applying low pressures at ambient temperature

La0.2Sr0.8Fe0.8Ta0.2O3−δ based thin film membranes with surface modification for oxygen production

Laminated Ceramic Structures within Alumina / YTZP System Obtained by Low Pressure Joining

Laser drilling of Ni–YSZ cermets

Laser-assisted, crack-free surface melting of large eutectic ceramic bodies

Neutron diffraction investigation for possible anisotropy within monolithic Al2O3/Y-TZP composites fabricated by stacking together cast tapes

Neutron diffraction residual stress analysis of Al2O3/Y-TZP ceramic composites

Oxygen permeation flux through 10Sc1YSZ-MnCo 2 O 4 asymmetric membranes prepared by two-step sintering

Oxygen permeation in symmetric and asymmetric La0.2Sr0.8Fe0.8Ta0.2O3−δ membranes

Oxygen transport properties of tubular Ce0.9Gd0.1O1.95-La0.6Sr0.4FeO3−d composite asymmetric oxygen permeation membranes supported on magnesium oxide

scholarly article by Simona Ovtar et al published February 2017 in Journal of Membrane Science

Piezo-spectroscopic characterization of alumina-zirconia layered composites

Pilot scale fabrication of lanthanum tungstate supports for H2 separation membranes

Preparation of lanthanum tungstate membranes by tape casting technique

Processing of Al2O3/Y-TZP laminates from water-based cast tapes

Processing of thin film ceramic membranes for oxygen separation

Residual Strain Profiles in Alumina-Zirconia Ceramic Composites

Residual strain scanning of alumina-based ceramic composites by neutron diffraction

Residual stress and diffraction line-broadening analysis of Al2O3/Y-TZP ceramic composites by neutron diffraction measurement

Selective Coimmobilization of His-Tagged Enzymes on Yttrium-Stabilized Zirconia-Based Membranes for Continuous Asymmetric Bioreductions

Self-supported ceramic substrates with directional porosity by mold freeze casting

Structure and Rheological Behavior of Alkoxide-Based Precursors for Drawing of Metal Oxide Micro- and Nanofibres

Synthesis and oxygen transport properties of La2−ySryNi1−xMoxO4+δ

Tape casting of Y-TZP with low binder content

Thickness control and interface quality as functions of slurry formulation and casting speed in side-by-side tape casting