A High-Capacity Anode for Lithium Batteries Consisting of Mesoporous NiO Nanoplatelets

A Novel Functional Wrapping Design by Complexation of ε-Polylysine with Liposomes Entrapping Bioactive Peptides

A Resistivity Model for Electrophoretic Deposition

article

AFM Characterization of the Nanoparticles Arrangement by Electrophoretic Deposition

Aqueous electrophoretic deposition of AL2O3/ZrO2 layered ceramics

Biodegradable bi-layered coatings shaped by dipping of Ti films followed by the EPD of gelatin/hydroxyapatite composites

scholarly article by Františka Frajkorová et al published January 2016 in Journal of the European Ceramic Society

Ceramic Films Produced by a Gel-Dipping Process

Characterization of residual compressive stresses in layered ceramics by positron annihilation spectroscopy

Chemical precipitation of nickel nanoparticles on Ti(C,N) suspensions focused on cermet processing

scholarly article by M. Dios et al published February 2017 in International Journal of Refractory Metals and Hard Materials

Coatings produced by electrophoretic deposition from nano-particulate silica sol–gel suspensions

Colloidal approach for the design of Ti powders sinterable at low temperature

Colloidal processing and sintering of porous percolative Ni-YSZ layers

Colloidal processing of Fe-based metalceramic composites with high content of ceramic reinforcement

Colloidal stability of Ni(OH)₂ in water and its dispersion into a ceramic matrix from the reaction media to obtain Ni/Al₂O₃ materials

Corrosion and Tribocorrosion Behavior of Ti-Alumina Composites

Corrosion behaviour of silica hybrid coatings produced from basic catalysed particulate sols by dipping and EPD

Cyclability of binder-free β-Ni(OH)2 anodes shaped by EPD for Li-ion batteries

article published in 2015

Development of biocompatible and fully bioabsorbable PLA/Mg films for tissue regeneration applications

scientific article published on 11 May 2019

Dispersion and Stabilization of TiN and TiC Nanoparticles in Organic Suspensions

EPD kinetics: A review

article

EPD of thick films for their application in lithium batteries

Effect of highly dispersed yttria addition on thermal stability of hydroxyapatite

article

Effect of rheology and processing parameters on the EPD coatings of basic sol-gel particulate sol

Effect of the slurry properties on the homogeneity of alumina deposits obtained by aqueous electrophoretic deposition

Electrochemical performance of pseudo-capacitor electrodes fabricated by Electrophoretic Deposition inducing Ni(OH)2 nanoplatelets agglomeration by Layer-by-Layer

Electrochemical properties of ultrasonically prepared Ni(OH)2 nanosheets in lithium cells

Electrophoretic Deposition of Flake-Shaped ZnO Nanoparticles

Electrophoretic Deposition of Gelatin/Hydroxyapatite Composite Coatings onto a Stainless Steel Substrate

Electrophoretic Deposition of Ni(OH)2Nanoplatelets Modified by Polyelectrolyte Multilayers: Study of the Coatings Formation in a Laminar Flow Cell

Electrophoretic Deposition of Transparent ZnO Thin Films from Highly Stabilized Colloidal Suspensions

scientific article published on 24 September 2011

Electrophoretic Forming of Al2O3/Y-TZP Layered Ceramics from Aqueous Suspensions

Electrophoretic deposition of aqueous alumina slips

FGM stainless steel-Ti(C,N) cermets through colloidal processing

Functionalizing Ti-Surfaces through the EPD of Hydroxyapatite/NanoY2O3

scientific article published on 03 December 2012

Graded ceramic coatings produced by thermogelation of polysaccharides

Impact of PLA/Mg films degradation on surface physical properties and biofilm survival

scientific article published on 03 November 2019

Improvement of Ti Processing through Colloidal Techniques

Improvement of TiN nanoparticles EPD inducing steric stabilization in non-aqueous suspensions

Improvement of sintering behaviour of titanium by colloidal techniques

scholarly article by R. G. Neves et al published September 2013 in Powder Metallurgy

In vitro degradation of a biodegradable polylactic acid/magnesium composite as potential bone augmentation material in the presence of titanium and PEEK dental implants

scholarly article by Tycho Zimmermann et al published October 2018 in Dental Materials

Influence of the urea content on the YSZ hydrothermal synthesis under dilute conditions and its role as dispersant agent in the post-reaction medium

Influence of ultrasound on the instantaneous synthesis of tridimensional α-Ni(OH)2 nanostructures and derived NiO nanoparticles

Interactions in YBa2Cu3O7−x aqueous suspensions

LiNi0.5Mn1.5O4 thick-film electrodes prepared by electrophoretic deposition for use in high voltage lithium-ion batteries

MAX phase foams produced via powder metallurgy process using water soluble space holder

Mechanical characterization of Ti(C,N)-based cermets fabricated through different colloidal processing routes

Multilayer coatings with improved reliability produced by aqueous electrophoretic deposition

Ni-YSZ Graded Coatings Produced by Dipping

Ni-YSZ self-supported films by gel electrophoresis

Nickel Oxide/Nickel Foam Composite as Supercapacitor Electrode via Electrophoretic Deposition

scholarly article by Z. Gonzalez et al published July 2015 in Key Engineering Materials

Nickel–alumina graded coatings obtained by dipping and EPD on nickel substrates

scholarly article by Begoña Ferrari et al published January 2006 in Journal of the European Ceramic Society

Ni–NiO composites obtained by controlled oxidation of green compacts

Novel colloidal approach for the microstructural improvement in Ti(C,N)/FeNi cermets

One-pot manufacture of nanoparticle-based films in aqueous media via an electric field-driven assembly process

Positron annihilation study of defect distribution in 8YSZ nanostructure

Processing of alumina-coated tetragonal zirconia materials and their response to sliding wear

Processing, nanoindentation and scratch testing of alumina-coated YTZP

Protective nature of nano-TiN coatings shaped by EPD on Ti substrates

Rapidly growing vegetables as new sources for lignocellulose nanofibre isolation: Physicochemical, thermal and rheological characterisation

scientific article

Relevance of the Semiconductor Microstructure in the Pseudocapacitance of the Electrodes Fabricated by EPD of Binder-Free β-Ni(OH)2Nanoplatelets

Role of stabilisers in the design of Ti aqueous suspensions for pressure slip casting

Sandwich materials formed by thick alumina tapes and thin-layered alumina–aluminium titanate structures shaped by EPD

Semiconductor-metal core-shell nanostructures by colloidal heterocoagulation in aqueous medium

Shaping Strategies for Porous Ti Fabrication throughout Colloidal Chemistry

article published in 2016

Silica-Zirconia Coatings Produced by Dipping and EPD from Colloidal Sol–Gel Suspensions

Soft solution processing of ZnO nanoarrays by combining electrophoretic deposition and hydrothermal growth

Special Issue: Electrophoretic deposition of ceramics

Steel binder cermets processed by combination of colloidal processing and powder metallurgy

article published in 2018

Strength Analysis of Self-Supported Films Produced by Aqueous Electrophoretic Deposition

Synthesis and dispersion of yttria-stabilized zirconia (YSZ) nanoparticles in supercritical water

Synthesis of mesoporous silica nanoparticles by sol–gel as nanocontainer for future drug delivery applications

The Effect of the Substrate on the Conductivity of NiO Electrodes in Electrochemical Capacitor Shaped by Electrophoretic Deposition

The conductivity of aqueous Al2O3 slips for electrophoretic deposition

Thermogelation of Al 2 O 3 /Y-TZP films produced by electrophoretic co-deposition

Thermogelation of Composite Films Produced by Electrophoretic Codeposition

Understanding of wetting and solubility behavior of Fe binder on Ti(C,N) cermets

Use of Polyelectrolytes for the Fabrication of Porous NiO Films by Electrophoretic Deposition for Supercapacitor Electrodes

article published in 2016

YBa2Cu3O7−x dispersion in iodine acetone for electrophoretic deposition: Surface charging mechanism in a halogenated organic media

YSZ/Ni–YSZ semi-cells shaped by electrophoretic deposition

Zirconia Thick Films Deposited on Nickel by Aqueous Electrophoretic Deposition

scholarly article by Begoña Ferrari & Rodrigo Moreno published 2000 in Journal of the Electrochemical Society