3D-Printed Polymer-Infiltrated Ceramic Network with Biocompatible Adhesive to Potentiate Dental Implant Applications

A comparative study of the contact fatigue behavior and associated damage micromechanisms of TiN- and WC:H-coated cold-work tool steel

article

Adhesion and abrasive wear resistance of TiN deposited on electrical discharge machined WC–Co cemented carbides

Analysis on the mechanical strength of WC-Co cemented carbides under uniaxial and biaxial bending

article published in 2014

Berkovich nanoindentation and deformation mechanisms in a hardmetal binder-like cobalt alloy

scholarly article by J.J. Roa et al published January 2015 in Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing

Contact Fatigue Behavior of PVD-Coated Steel

article

Contact damage and fracture micromechanisms of multilayered TiN/CrN coatings at micro- and nano-length scales

Contact damage and residual strength in hardmetals

Contact damage and residual strength in polycrystalline diamond (PCD)

article published in 2016

Contact damage resistance of TiN-coated hardmetals: Beneficial effects associated with substrate grinding

Contact fatigue behavior of PVD-coated hardmetals

article

Corrosion Evaluation of Austenitic and Duplex Stainless Steels in Molten Carbonate Salts at 600 °C for Thermal Energy Storage

Corrosion damage in WC–Co cemented carbides: residual strength assessment and 3D FIB-FESEM tomography characterisation

Corrosion-Induced Damage and Residual Strength of WC-Co,Ni Cemented Carbides: Influence of Microstructure and Corrosion Medium

Critical Assessment of Two-Dimensional Methods for the Microstructural Characterization of Cemented Carbides

Cross-sectional nanoindentation and nanoscratch of compositionally graded mullite films

article

Cyclic deformation behaviour of superduplex stainless steels

article published in 2001

Cyclic deformation of superduplex stainless steels at intermediate temperatures

Cyclic stress-strain response and dislocation substructure evolution of a ferrite-austenite stainless steel

Damage induced by monotonic and cyclic spherical indentation in polycrystalline diamond (PCD)

Duplex Stainless Steels for Thermal Energy Storage: Characterization of Oxide Scales Formed in Carbonate Salts at 500 °C

Dynamic strain ageing effects on superduplex stainless steels at intermediate temperatures

Editorial

Editorial

Editorial

Evolution of microstructure and residual stresses in gradually ground/polished 3Y-TZP

FIB/FESEM experimental and analytical assessment of R-curve behavior of WC–Co cemented carbides

article by J.M. Tarragó et al published October 2015 in Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing

Fatigue Behavior of Alumina–Zirconia Multilayered Ceramics

article

Fatigue behavior of powder metallurgy high-speed steels: fatigue limit prediction using a crack growth threshold-based approach

article

Fatigue mechanics of WC–Co cemented carbides

article

Fatigue of Cemented Carbides

article

Fatigue performance improvement of electrical discharge machined hardmetals by means of combined thermal annealing and surface modification routes

article

Fatigue susceptibility under contact loading of hardmetals coated with ceramic films

article

Fatigue testing and properties of hardmetals in the gigacycle range

article

Focused ion beam tomography of WC-Co cemented carbides

Fracture and fatigue behavior of WC–Co and WC–CoNi cemented carbides

article

Fracture and fatigue behavior of electrical-discharge machined cemented carbides

article

Fracture and fatigue of rock bit cemented carbides: Mechanics and mechanisms of crack growth resistance under monotonic and cyclic loading

article

Fracture behaviour of an Al2O3-ZrO2 multi-layered ceramic with residual stresses due to phase transformations*

Fracture of Layered Ceramics

Fracture toughness and mechanical strength of Y-TZP/PSZ ceramics

Fracture toughness of alumina and ZTA ceramics: microstructural coarsening effects

Fracture toughness of cemented carbides: Testing method and microstructural effects

Fracture toughness of zirconia–alumina composites

Grinding Effects on Surface Integrity and Mechanical Strength of WC-Co Cemented Carbides

Hall-Petch strengthening of the constrained metallic binder in WC–Co cemented carbides: Experimental assessment by means of massive nanoindentation and statistical analysis

article by J.J. Roa et al published October 2016 in Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing

High cycle fatigue behaviour of a standard duplex stainless steel plate and bar

article

High-temperature mechanical behaviour of flaw tolerant alumina–zirconia multilayered ceramics

Implementation of an effective time-saving two-stage methodology for microstructural characterization of cemented carbides

Influence of Corrosion-Induced Damage on Mechanical Integrity and Load-Bearing Capability of Cemented Carbides

Influence of grinding/polishing on the mechanical, phase stability and cell adhesion properties of yttria-stabilized zirconia

Influence of microstructural assemblage of the substrate on the adhesion strength of coated PcBN grades

Influence of notch radius and R-curve behaviour on the fracture toughness evaluation of WC–Co cemented carbides

article by Yadir Torres et al published October 2008 in Engineering Fracture Mechanics

Influence of substrate microstructure and surface finish on cracking and delamination response of TiN-coated cemented carbides

Influence of substrate microstructure on the contact fatigue strength of coated cold-work tool steels

article

Influence of temperature and hot corrosion on the micro–nanomechanical behavior of protective mullite EBCs

Influence of temperature on the biaxial strength of cemented carbides with different microstructures

scientific article published in February 2018

Influence of the Test Configuration and Temperature on the Mechanical Behaviour of WC-Co

scientific article published on 29 February 2020

Influence of the microstructure on the thermal shock behavior of cemented carbides

Integration of conductive silver sensors on zirconia ceramics by screen-printing for monitoring strain under applied load

Intrinsic hardness of constitutive phases in WC–Co composites: Nanoindentation testing, statistical analysis, WC crystal orientation effects and flow stress for the constrained metallic binder

article by J.J. Roa et al published November 2015 in Journal of the European Ceramic Society

Investigations on micro-mechanical properties of polycrystalline Ti(C,N) and Zr(C,N) coatings

Loading configuration effects on the strength reliability of alumina–zirconia multilayered ceramics

Loading mode effects on the fracture toughness and fatigue crack growth resistance of WC–Co cemented carbides

article

Low cycle fatigue behaviour of duplex stainless steels at high temperatures

article

Mechanical Performance of AlCrSiN and AlTiSiN Coatings on Inconel and Steel Substrates after Thermal Treatments

Mechanical behavior of 3Al2O3·2SiO2 films under nanoindentation

Mechanical behavior of PVD coatings deposited on ADI

Mechanical deformation of WC–Co composite micropillars under uniaxial compression

Mechanical strength improvement of electrical discharge machined cemented carbides through PVD (TiN, TiAlN) coatings

Mechanical strength of ground WC-Co cemented carbides after coating deposition

Mechanics and mechanisms of fatigue in a WC–Ni hardmetal and a comparative study with respect to WC–Co hardmetals

article

Microstructural Coarsening of Zirconia-Toughened Alumina Composites

Microstructural effects on the R-curve behavior of WC-Co cemented carbides

article by J.M. Tarragó et al published May 2016 in Materials & Design

Microstructural effects on the fatigue crack nucleation in cold work tool steels

article

Microstructural influence on tolerance to corrosion-induced damage in hardmetals

Microstructure, mechanical properties and stability of nitrided Y-TZP

Nanoindentation and nanoscratch properties of mullite-based environmental barrier coatings: Influence of chemical composition — Al/Si ratio

article

Nanoindentation of Al2O3/Al2TiO5 composites: Small-scale mechanical properties of Al2TiO5 as reinforcement phase

Nanoscratch Testing of 3Al2O3·2SiO2 EBCs: Assessment of Induced Damage and Estimation of Adhesion Strength

Novel Mechanical Characterization of Austenite and Ferrite Phases within Duplex Stainless Steel

On the fatigue crack growth behavior of WC–Co cemented carbides: kinetics description, microstructural effects and fatigue sensitivity

article

On the transformation toughening of Y–ZrO2 ceramics with mixed Y–TZP/PSZ microstructures

article published in 2001

Processing optimisation and fracture behaviour of layered ceramic composites with highly compressive layers

R-Curve Approach to Describe the Fracture Resistance of Tool Steels

article by Ingrid Picas et al published 1 April 2016 in Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science

Reply to the paper entitled “Comments on thermal shock resistance of yttria stabilized zirconia with Palmqvist indentation cracks by G. Fargas, D. Casellas, L. Llanes, M. Anglada” by F. Tancret [J. Eur. Ceram. Soc. 23 (2003) 107–114]

article

Residual stresses, strength and toughness of laminates with different layer thickness ratios

Resistance to Contact Deformation and Damage of Hard Ceramics

scientific article

Scale effect in mechanical characterization of WC-Co composites

Silver Nanoparticles for Conductive Inks: From Synthesis and Ink Formulation to Their Use in Printing Technologies

Small scale fracture behaviour of multilayer TiN/CrN systems: Assessment of bilayer thickness effects by means of ex-situ tests on FIB-milled micro-cantilevers

Small-scale mechanical properties of constitutive phases within a polycrystalline cubic boron nitride composite

Substrate surface finish effects on scratch resistance and failure mechanisms of TiN-coated hardmetals

Surface Patterning of Cemented Carbides by Means of Nanosecond Laser

scientific article

Surface integrity assessment of laser treated and subsequently coated cemented carbides

scientific article

Thermal Shock Behavior of an Al 2 O 3 /ZrO 2 Multilayered Ceramic with Residual Stresses due to Phase Transformations

Thermal shock resistance of yttria-stabilized zirconia with Palmqvist indentation cracks

Thermally Induced Surface Integrity Changes of Ground WC-Co Hardmetals

Threshold strength evaluation on an Al2O3–ZrO2 multilayered system

TiN coating on an electrical discharge machined WC-Co hardmetal: surface integrity effects on indentation adhesion response