3D, chemical and electrochemical characterization of blasted TI6Al4V surfaces: Its influence on the corrosion behaviour

A Mathematical Model to Study the Effect of Different Variables on the Potential Distribution in a Damaged Metal/Organic Coating System Using FEM

A study on the relationships between corrosion properties and chemistry of thermally oxidised surface films formed on polished commercial magnesium alloys AZ31 and AZ61

scholarly article by Sebastián Feliu et al published March 2014 in Applied Surface Science

Amorphous Carbon Nanofibers and Their Activated Carbon Nanofibers as Supercapacitor Electrodes

Amorphous carbon nanofibres inducing high specific capacitance of deposited hydrous ruthenium oxide

Applications for CO2-Activated Carbon Monoliths: II. EDLC Electrodes

Atmospheric corrosion of magnesium alloys AZ31 and AZ61 under continuous condensation conditions

scholarly article by Sebastián Feliu et al published May 2011 in Corrosion Science

Biocarbon Monoliths as Supercapacitor Electrodes: Influence of Wood Anisotropy on Their Electrical and Electrochemical Properties

Carbon Nanocoils as Unusual Electrode Materials for Supercapacitors

Characterization of roughness and pitting corrosion of surfaces modified by blasting and thermal oxidation

Comparative EIS and XPS studies of the protective character of thin lacquer films containing CR or P salts formed on galvanised steel, galvanneal and galfan substrates

Concentration-dependent effects of titanium and aluminium ions released from thermally oxidized Ti6Al4V alloy on human osteoblasts

scientific article published on 01 May 2006

Contradictory results of the UVCON and saline immersion tests regarding the evaluation of some inhibitor/lacquer combinations on galvanised coatings

Correlation between Capacitance and Porosity in Microporous Carbon Monoliths

Correlation of morphology and barrier properties of thin microwave plasma polymer films on metal substrate

Dense carbon monoliths for supercapacitors with outstanding volumetric capacitances

scholarly article in Carbon, vol. 68, March 2014

EIS study of the corrosion behaviour of zinc-based coatings on steel in quiescent 3% NaCl solution. Part 1: directly exposed coatings

EIS study of the corrosion behaviour of zinc-based coatings on steel in quiescent 3% NaCl solution. Part 2: coatings covered with an inhibitor-containing lacquer

Effect of naturally formed oxide films and other variables in the early stages of Mg-alloy corrosion in NaCl solution

Effect of the chemistry and structure of the native oxide surface film on the corrosion properties of commercial AZ31 and AZ61 alloys

Effect of the incorporation of chromating reagents in an acrylic lacquer applied on galvanised steel, galvanneal and galfan during the UVCON test

Electrochemical study of tailored sol–gel thin films as pre-treatment prior to organic coating for AZ91 magnesium alloy

scholarly article by Violeta Barranco et al published August 2010 in Progress in Organic Coatings

Enhancing in vitro biocompatibility and corrosion protection of organic–inorganic hybrid sol–gel films with nanocrystalline hydroxyapatite

scientific article published on 19 May 2014

Graphite Oxide: An Interesting Candidate for Aqueous Supercapacitors

Improvement of the adhesion between polyaniline and commercial carbon paper by acid treatment and its application in supercapacitor electrodes

article

In situ cell culture monitoring on a Ti-6Al-4V surface by electrochemical techniques

scientific article

Influence of substrate composition on corrosion protection of sol–gel thin films on magnesium alloys in 0.6M NaCl aqueous solution

article

Influence of the microstructure and topography on the barrier properties of oxide scales generated on blasted Ti6Al4V surfaces

scientific article published on 05 March 2011

Multifunctional sol-gel derived thin film based on nanocrystaline hydroxyapatite powders

Preparation of sol–gel hybrid materials from γ-methacryloxypropyltrimethoxysilane and tetramethyl orthosilicate: study of the hydrolysis and condensation reactions

Recubrimientos de Hidroxiapatita Nanocristalina – Preparación, Caracterización y Evaluación de la Bioactividad

Spectroscopic and electrochemical characterisation of thin cathodic plasma polymer films on iron

Study of degradation mechanisms of a protective lacquer film formulated with phosphating reagents applied on galvanised steel, galvanneal and galfan in exposure to UV/condensation test

Synthesis of copolymer-stabilized silver nanoparticles for coating materials

Tailored Sol-Gel Coatings as Environmentally Friendly Pre-Treatments for Corrosion Protection

Tailored thin plasma polymers for the corrosion protection of metals

The contribution of sulfate ions and protons to the specific capacitance of microporous carbon monoliths

The effect of low temperature heat treatment on surface chemistry and corrosion resistance of commercial magnesium alloys AZ31 and AZ61 in 0.6MNaCl solution

scholarly article by Sebastián Feliu et al published March 2014 in Corrosion Science

Thermal oxidation enhances early interactions between human osteoblasts and alumina blasted Ti6Al4V alloy

scientific article published on 01 May 2007

Triethylphosphite as a network forming agent enhances in vitro biocompatibility and corrosion protection of hybrid organic–inorganic sol–gel coatings for Ti6Al4V alloys

scientific article published on 17 October 2014

XPS study of the surface chemistry of conventional hot-dip galvanised pure Zn, galvanneal and Zn–Al alloy coatings on steel