List of works - Erik Lewin

An investigation of c-HiPIMS discharges during titanium deposition

scholarly article by Clara Barker et al published November 2014 in Surface & Coatings Technology

Carbide and nanocomposite thin films in the Ti–Pt–C system

Carbon release by selective alloying of transition metal carbides

scientific article published on 18 August 2011

Comparison of Al–Si–N nanocomposite coatings deposited by HIPIMS and DC magnetron sputtering

Conductive nanocomposite ceramics as tribological and electrical contact materials

Contact Resistance of Ti-Si-C-Ag and Ti-Si-C-Ag-Pd Nanocomposite Coatings

Deposition and characterization of ternary thin films within the Ti–Al–C system by DC magnetron sputtering

Deposition of Ti-Si-C-Ag Nanocomposite Coatings as Electrical Contact Material

Design of Nanocomposite Low-Friction Coatings

article by O. Wilhelmsson et al published 9 July 2007 in Advanced Functional Materials

Design of carbide-based nanocomposite thin films by selective alloying

article by Ulf Jansson et al published November 2011 in Surface & Coatings Technology

Design of the lattice parameter of embedded nanoparticles

article by Erik Lewin et al published August 2010 in Chemical Physics Letters

Effect of in situ electric-field-assisted growth on antiphase boundaries in epitaxial Fe3O4 thin films on MgO

Electronic structure and chemical bonding of nanocrystalline-TiC/amorphous-C nanocomposites

scholarly article in Physical Review B, vol. 80 no. 23, December 2009

Flow hydrogenation of p-nitrophenol with nano-Ag/Al2O3

scholarly article by Cristina Paun et al published 2016 in RSC Advances

Friction and contact resistance of nanocomposite Ti–Ni–C coatings

Growth and structural properties of Mg:C thin films prepared by magnetron sputtering

Growth of Ti-C nanocomposite films by reactive high power impulse magnetron sputtering under industrial conditions

Hard and crack resistant carbon supersaturated refractory nanostructured multicomponent coatings

scientific article published in Scientific Reports

Hard wear-resistant coatings with anisotropic thermal conductivity for high thermal load applications

High-rate deposition of amorphous and nanocomposite Ti–Si–C multifunctional coatings

In Situ Formation of Ge Nanoparticles by Annealing of Al-Ge-N Thin Films Followed by HAXPES and XRD

scientific article published on 05 August 2019

Industrialisation Study of Nanocomposite nc-TiC/a-C Coatings for Electrical Contact Applications

Influence of Deposition Temperature on the Phase Evolution of HfNbTiVZr High-Entropy Thin Films

scientific article published on 15 February 2019

Influence of oxygen content on structure and material properties of reactively sputtered Al-Ge-O-N thin films

Influence of sputter damage on the XPS analysis of metastable nanocomposite coatings

Magnetron sputtering of Zr–Si–C thin films

article published in 2012

Microstructure evolution of Ti–Si–C–Ag nanocomposite coatings deposited by DC magnetron sputtering

Modified high power impulse magnetron sputtering process for increased deposition rate of titanium

scholarly article by Clara Barker et al published November 2013 in Journal of Vacuum Science & Technology A

Multicomponent Hf-Nb-Ti-V-Zr nitride coatings by reactive magnetron sputter deposition

N-TiO 2 /Cu-TiO 2 double-layer films: Impact of stacking order on photocatalytic properties

scholarly article by Corrado Garlisi et al published September 2017 in Journal of Catalysis

Nanocomposite Al–Ge–N thin films and their mechanical and optical properties

Nanocomposite nc-TiC∕a-C thin films for electrical contact applications

Ni and Ti diffusion barrier layers between Ti–Si–C and Ti–Si–C–Ag nanocomposite coatings and Cu-based substrates

On the origin of a third spectral component of C1s XPS-spectra for nc-TiC/a-C nanocomposite thin films

Sonogashira coupling reaction over supported gold nanoparticles: Influence of support and catalyst synthesis route

Spectral artefacts post sputter-etching and how to cope with them – A case study of XPS on nitride-based coatings using monoatomic and cluster ion beams

article published in 2018

Sputter deposition of transition-metal carbide films — A critical review from a chemical perspective

article

Structural, mechanical and electrical-contact properties of nanocrystalline-NbC/amorphous-C coatings deposited by magnetron sputtering

Structure and properties of Cr–C/Ag films deposited by magnetron sputtering

Structure and properties of sputter-deposited Al-Sn-N thin films

Synthesis and characterisation of Mo-B-C thin films deposited by non-reactive DC magnetron sputtering

Synthesis and characterization of MoB2−x thin films grown by nonreactive DC magnetron sputtering

Synthesis and characterization of multicomponent (CrNbTaTiW)C films for increased hardness and corrosion resistance

Synthesis, structure and properties of Ni-alloyed TiCx-based thin films

Thermal conductivity of hard oxynitride coatings

article published in 2013

Tuning structure and mechanical properties of Ta-C coatings by N-alloying and vacancy population