Search filters

List of works by Wojciech Swieszkowski

3D Bioprinting in Skeletal Muscle Tissue Engineering

scientific article published on 23 April 2019

3D Diatom-Designed and Selective Laser Melting (SLM) Manufactured Metallic Structures

scientific article published on 24 December 2019

3D Printing of Thermoresponsive Polyisocyanide (PIC) Hydrogels as Bioink and Fugitive Material for Tissue Engineering

scientific article published on 21 May 2018

3D bioprinted hydrogel model incorporating β-tricalcium phosphate for calcified cartilage tissue engineering

scientific article published on 03 May 2019

3D bioprinting of BM-MSCs-loaded ECM biomimetic hydrogels for in vitro neocartilage formation.

scientific article published on 19 July 2016

3D bioprinting of hydrogel constructs with cell and material gradients for the regeneration of full-thickness chondral defect using a microfluidic printing head

scientific article published on 01 July 2019

3D-Printed Drug Delivery Systems: The Effects of Drug Incorporation Methods on Their Release and Antibacterial Efficiency

scientific article published on 29 July 2020

3D-Printing of Functionally Graded Porous Materials Using On-Demand Reconfigurable Microfluidics

scientific article published on 29 April 2019

A Multifunctional Polymeric Periodontal Membrane with Osteogenic and Antibacterial Characteristics

A bioactive hybrid three-dimensional tissue-engineering construct for cartilage repair

scientific article published on 4 September 2015

A two-compartment bone tumor model to investigate interactions between healthy and tumor cells

scientific article published on 05 March 2020

An elastic material for cartilage replacement in an arthritic shoulder joint.

scientific article published on 26 September 2005

An evaluation of the potential consequences of drilling titanium and tantalum implants during surgery - a pilot study.

scientific article published on 3 November 2017

Biofabricating murine and human myo-substitutes for rapid volumetric muscle loss restoration

scientific article published on 15 February 2021

Biomechanical properties of native and tissue engineered heart valve constructs.

scientific article published on 21 October 2013

Bone ingrowth simulation for a concept glenoid component design.

scientific article published in May 2005

Characterization and Optimization of the Seeding Process of Adipose Stem Cells on the Polycaprolactone Scaffolds

scientific article published on 20 February 2019

Characterization and influence of hydroxyapatite nanopowders on living cells

scientific article published on 27 December 2018

Co-axial wet-spinning in 3D Bioprinting: state of the art and future perspective of microfluidic integration

Co-axial wet-spinning in 3D bioprinting: state of the art and future perspective of microfluidic integration

scholarly article by Marco Costantini et al published 9 November 2018 in Biomanufacturing

Comparison of Dental Stone Models and Their 3D Printed Acrylic Replicas for the Accuracy and Mechanical Properties

scientific article published on 13 September 2020

Comparison of adipose stem cells sources from various locations of rat body for their application for seeding on polymer scaffolds.

scientific article

Comparison of bacterial adhesion and cellular proliferation on newly developed three-dimensional scaffolds manufactured by rapid prototyping technology

scientific article published on 27 May 2011

Computer aided design of architecture of degradable tissue engineering scaffolds.

scientific article published on 6 November 2017

Consistent quasistatic and acoustic elasticity determination of poly-L-lactide-based rapid-prototyped tissue engineering scaffolds

scientific article published on 24 July 2012

Contact stresses in the glenoid component in total shoulder arthroplasty

scientific article published on 01 January 2003

Correlation between porous texture and cell seeding efficiency of gas foaming and microfluidic foaming scaffolds

scientific article published on 05 February 2016

Dental plaque as a biofilm - a risk in oral cavity and methods to prevent

scientific article

Determining the effectiveness of vitamin C in skin care by atomic force microscope

scientific article published on 17 May 2019

Drug delivery systems and materials for wound healing applications

scientific article published on 4 April 2018

Electrospun bio-composite P(LLA-CL)/collagen I/collagen III scaffolds for nerve tissue engineering

scientific article published on 21 March 2012

Engineering biological gradients

scientific article published on 01 January 2019

Enhancing X-ray Attenuation of 3D Printed Gelatin Methacrylate (GelMA) Hydrogels Utilizing Gold Nanoparticles for Bone Tissue Engineering Applications

scientific article published on 20 February 2019

Evolutionary design of bone scaffolds with reference to material selection.

scientific article published in June 2012

Formation of calcium phosphate coatings within polycaprolactone scaffolds by simple, alkaline phosphatase based method

scientific article published on 22 November 2018

From Matrix Vesicles to Miniature Rocks: Evolution of Calcium Deposits in Calf Costochondral Junctions

scientific article published on 16 July 2020

Gelatin methacrylate scaffold for bone tissue engineering: The influence of polymer concentration

scientific article published on 7 September 2017

Gradients in pore size enhance the osteogenic differentiation of human mesenchymal stromal cells in three-dimensional scaffolds

scientific article published on 10 March 2016

Highly biocompatible, nanocrystalline hydroxyapatite synthesized in a solvothermal process driven by high energy density microwave radiation.

scientific article published on 12 February 2013

Highly porous titanium scaffolds for orthopaedic applications.

scientific article published in October 2010

Hydrogel-Based Fiber Biofabrication Techniques for Skeletal Muscle Tissue Engineering

publication published on 27 January 2022

Hydroxyapatite Nanopowder Synthesis with a Programmed Resorption Rate

Impact of the Balloon Inflation Time and Pattern on the Coronary Stent Expansion

scientific article published on 21 March 2019

In vitro degradation of ZM21 magnesium alloy in simulated body fluids

scientific article published on 8 April 2016

In vivo and in vitro study of a novel nanohydroxyapatite sonocoated scaffolds for enhanced bone regeneration

scientific article published on 30 January 2019

Influence of SaOS-2 cells on corrosion behavior of cast Mg-2.0Zn0.98Mn magnesium alloy

scientific article published on 25 October 2016

Influence of biodegradable polymer coatings on corrosion, cytocompatibility and cell functionality of Mg-2.0Zn-0.98Mn magnesium alloy.

scientific article published on 11 April 2016

Influence of internal pore architecture on biological and mechanical properties of three-dimensional fiber deposited scaffolds for bone regeneration

scientific article published on 8 January 2016

Influence of macromolecular structure of novel 2- and 4-armed polylactides on their physicochemical properties and in vitro degradation process

scholarly article by Emilia Choinska et al published 17 June 2016 in Journal of Polymer Research

Influencing chondrogenic differentiation of human mesenchymal stromal cells in scaffolds displaying a structural gradient in pore size.

scientific article published on 8 March 2016

Insight into characteristic features of cartilage growth plate as a physiological template for bone formation

scientific article published on 10 October 2015

Internal nanocrystalline structure and stiffness alterations of electrospun polycaprolactone-based mats after six months of in vitro degradation. An atomic force microscopy assay

scientific article published on 17 September 2019

Irradiation with 365 nm and 405 nm wavelength shows differences in DNA damage of swine pancreatic islets

scientific article published on 25 June 2020

Laser and Electron Beam Additive Manufacturing Methods of Fabricating Titanium Bone Implants

scholarly article by Bartłomiej Wysocki et al published 26 June 2017 in Applied sciences

Mechanical and in vitro evaluations of composite PLDLLA/TCP scaffolds for bone engineering

article

Mechano-signalling, induced by fullerene C60 nanofilms, arrests the cell cycle in the G2/M phase and decreases proliferation of liver cancer cells

scientific article published on 06 August 2019

Micro CT-based multiscale elasticity of double-porous (pre-cracked) hydroxyapatite granules for regenerative medicine

scientific article published on 30 January 2012

Micro and nanoscale characterization of poly(DL-lactic-co-glycolic acid) films subjected to the L929 cells and the cyclic mechanical load

scientific article published on 06 September 2018

Microfluidic Foaming: A Powerful Tool for Tailoring the Morphological and Permeability Properties of Sponge-like Biopolymeric Scaffolds

scientific article published on 5 October 2015

Microfluidic-enhanced 3D bioprinting of aligned myoblast-laden hydrogels leads to functionally organized myofibers in vitro and in vivo

scientific article published on 23 March 2017

Microfluidics in biofabrication

scientific article published on 16 April 2020

Microsensor for Cell Force Measurement

Microstructure and mechanical properties investigation of CP titanium processed by selective laser melting (SLM)

scholarly article by Bartłomiej Wysocki et al published March 2017 in Journal of Materials Processing Technology

Microstructure and nanomechanical properties of single stalks from diatom Didymosphenia geminata and their change due to adsorption of selected metal ions.

scientific article published on 18 May 2017

Multi-scale characterization and biological evaluation of composite surface layers produced under glow discharge conditions on NiTi shape memory alloy for potential cardiological application

scientific article published on 24 July 2018

Nanobead-on-string composites for tendon tissue engineering

scientific article published on 27 April 2018

Naturally derived proteins and glycosaminoglycan scaffolds for tissue engineering applications

scientific article published on 5 April 2017

Numerical Modeling in the Design and Evaluation of Scaffolds for Orthopaedics Applications ⬇️

scientific article published on January 1, 2012

Observations of mineralised tissues of teeth in X-ray micro-computed tomography.

scientific article published on 4 November 2016

PLA short sub-micron fiber reinforcement of 3D bioprinted alginate constructs for cartilage regeneration

scientific article published on 14 November 2017

Photocurable Biopolymers for Coaxial Bioprinting

scientific article published on 01 January 2021

Post Processing and Biological Evaluation of the Titanium Scaffolds for Bone Tissue Engineering.

scientific article published on 15 March 2016

Preparation and enhanced mechanical properties of hydroxyapatite hybrid hydrogels via novel photocatalytic polymerization

scholarly article by Da-Jhan Chiu et al published 21 November 2017 in Journal of Polymer Research

Preparation of a Ceramic Matrix Composite Made of Hydroxyapatite Nanoparticles and Polylactic Acid by Consolidation of Composite Granules

scientific article published on 30 May 2020

Processing of (Co)Poly(2-oxazoline)s by Electrospinning and Extrusion from Melt and the Postprocessing Properties of the (Co)Polymers

scientific article published on 02 February 2020

Quantitative imaging of electrospun fibers by PeakForce Quantitative NanoMechanics atomic force microscopy using etched scanning probes.

scientific article

Radial head prosthesis with a mobile head

scientific article published in January 2004

Repair and regeneration of osteochondral defects in the articular joints.

scientific article published on 07 August 2007

Repurposing biodegradable tissue engineering scaffolds for localized chemotherapeutic delivery

scientific article published on 03 February 2020

Retraction Note: An evaluation of the potential consequences of drilling titanium and tantalum implants during surgery - a pilot study

scientific article published on 24 October 2019

Scaffold vascularization method using an adipose-derived stem cell (ASC)-seeded scaffold prefabricated with a flow-through pedicle

scientific article published on 23 January 2020

Solventless Conducting Paste Based on Graphene Nanoplatelets for Printing of Flexible, Standalone Routes in Room Temperature

scientific article published on 13 October 2018

Structure and physico-mechanical properties of low temperature plasma treated electrospun nanofibrous scaffolds examined with atomic force microscopy

scientific article published on 8 February 2018

Surface characterization and cytocompatibility evaluation of silanized magnesium alloy AZ91 for biomedical applications

scientific article (publication date: December 2012)

Tailored degradation of biocompatible poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/calcium silicate/poly(lactide-co-glycolide) ternary composites: an in vitro study.

scientific article published on 28 June 2013

Tendon Tissue Engineering: Effects of Mechanical and Biochemical Stimulation on Stem Cell Alignment on Cell-Laden Hydrogel Yarns

scientific article published on 06 February 2019

Ternary composite scaffolds with tailorable degradation rate and highly improved colonization by human bone marrow stromal cells.

scientific article

The Effect of Anti-aging Peptides on Mechanical and Biological Properties of HaCaT Keratinocytes

scientific article published on 16 November 2017

The Influence of Selective Laser Melting (SLM) Process Parameters on In-Vitro Cell Response

scientific article published on 30 May 2018

The anatomic features of the radial head and their implication for prosthesis design

scientific article published on 01 December 2001

The combined antibacterial and anticancer properties of nano Ce-containing Mg-phosphate ceramic

scientific article published on 22 June 2020

The influence of carbon-encapsulated iron nanoparticles on elastic modulus of living human mesenchymal stem cells examined by atomic force microscopy

scientific article published on 21 February 2018

The influence of chemical polishing of titanium scaffolds on their mechanical strength and in-vitro cell response

scientific article published on 12 April 2018

Three-dimensional printed polycaprolactone-based scaffolds provide an advantageous environment for osteogenic differentiation of human adipose-derived stem cells

scientific article published on 6 September 2016

Three-dimensional printing of chemically crosslinked gelatin hydrogels for adipose tissue engineering

scientific article published on 16 January 2020

Translational Application of Microfluidics and Bioprinting for Stem Cell-Based Cartilage Repair.

scientific article published on 20 February 2018

Translational stiffness of the replaced shoulder joint.

scientific article published in December 2003

Tripolyphosphate-Crosslinked Chitosan/Gelatin Biocomposite Ink for 3D Printing of Uniaxial Scaffolds

scientific article published on 30 April 2020

Tuning the Wettability of a Thin Polymer Film by Gradually Changing the Geometry of Nanoscale Pore Edges

scientific article published on 19 April 2019

Unrecoverable bi-products of drilling titanium alloy and tantalum metal implants: a pilot study

scientific article published on 13 May 2018

Water vapor induced self-assembly of islands/honeycomb structure by secondary phase separation in polystyrene solution with bimodal molecular weight distribution

scientific article published on 24 June 2021

X-ray physics-based CT-to-composition conversion applied to a tissue engineering scaffold, enabling multiscale simulation of its elastic behavior

scientific article published on 05 December 2017

[Bipolar radial head prosthesis--own design]

scientific article published on 01 January 2003

Paulina is supported by:

About Paulina

Help