List of works - Andreas Stark

An in-situ high-energy X-ray diffraction study on the hot-deformation behavior of a β-phase containing TiAl alloy

Biomimetic hard and tough nanoceramic Ti-Al-N film with self-assembled six-level hierarchy

scientific article published on 01 April 2019

CaO dissolution during melting and solidification of a Mg–10wt.% CaO alloy detected with in situ synchrotron radiation diffraction

article published in 2015

Ceramic-Reinforced γ-TiAl-Based Composites: Synthesis, Structure, and Properties

scientific article published on 20 February 2019

Creep deformation of Co-Re-Ta-C alloys with varying C content–investigated in-situ by simultaneous synchrotron radiation diffraction

Determination of Temperature-Dependent Elastic Constants of Steel AISI 4140 by Use of In Situ X-ray Dilatometry Experiments

scientific article published on 21 May 2020

Directional Atomic Rearrangements During Transformations Between the α- and γ-Phases in Titanium Aluminides

scholarly article by K.-D. Liss et al published April 2008 in Advanced Engineering Materials

In Situ Investigation of Microstructure Evolution during Solidification of Mg10CaxGd (x=5, 10, 20) Alloys

In Situ Studies of Light Metals with Synchrotron Radiation and Neutrons

In Situ Synchrotron Diffraction Analysis of Zn Additions on the Compression Properties of NK30

scientific article published on 28 November 2019

In situ synchrotron diffraction of the solidification of Mg4Y3Nd

article published in 2013

In situ synchrotron radiation diffraction investigation of the compression behaviour at 350°C of ZK40 alloys with addition of CaO and Y

article

In situ synchrotron radiation diffraction study of the role of Gd, Nd on the elevated temperature compression behavior of ZK40

In-situ analysis of continuous cooling precipitation in Al alloys by wide-angle X-ray scattering

scientific article published on 02 April 2020

Influence of quasicrystal I-phase on twinning of extruded Mg-Zn-Y alloys under compression

Load partition and microstructural evolution during in situ hot deformation of Ti–6Al–6V–2Sn alloys

Peritectic titanium alloys for 3D printing

scientific article published in Nature Communications

Phase Formation during Solidification of Mg-Nd-Zn Alloys: An In Situ Synchrotron Radiation Diffraction Study

scientific article published on 06 September 2018

Phase evolution and carbon redistribution during continuous tempering of martensite studied with high resolution techniques

Precipitation-based grain boundary design alters Inter- to Trans-granular Fracture in AlCrN Thin Films

scientific article published in 2022

Stainless steel reveals an anomaly in thermal expansion behavior of severely deformed materials

scientific article published in 2021

Strain energy contributions on the bainitic phase transformation in a CrMoV steel during continuous cooling

Stress relaxation through thermal crack formation in CVD TiCN coatings grown on WC-Co with different Co contents

scientific article published in January 2020

Stress-controlled decomposition routes in cubic AlCrN films assessed by in-situ high-temperature high-energy grazing incidence transmission X-ray diffraction

scientific article published on 02 December 2019

Study of the Solidification of AS Alloys Combining In Situ Synchrotron Diffraction and Differential Scanning Calorimetry

The Effect of Zn Content on the Mechanical Properties of Mg-4Nd-xZn Alloys (x = 0, 3, 5 and 8 wt.%)

scientific article published on 28 June 2018

The Role of Zn on the Elevated Temperature Compression Behavior of Mg5Nd: An In Situ Synchrotron Radiation Diffraction Study

Thermal Expansion of a Multiphase Intermetallic Ti-Al-Nb-Mo Alloy Studied by High-Energy X-ray Diffraction