List of works - Fredrik Larsson

A comparison of the primal and semi-dual variational formats of gradient-extended crystal inelasticity

A comparison of variational formats for porous media subjected to dynamic loading

A flux-free a posteriori error estimator for the incompressible Stokes problem using a mixed FE formulation

A goal-oriented adaptive procedure for the quasi-continuum method with cluster approximation

article published in 2015

A multiscale model for reinforced concrete with macroscopic variation of reinforcement slip

scientific article published on 12 June 2018

A numerical framework for load identification and regularization with application to rolling disc problem

A poro-viscoelastic substitute model of fine-scale poroelasticity obtained from homogenization and numerical model reduction

scientific article published on 4 January 2020

A posteriori error estimation for numerical model reduction in computational homogenization of porous media

A sequential-adaptive strategy in space–time with application to consolidation of porous media

A strategy for input estimation with sensitivity analysis

scientific article published in 2007

A study of multiple crack interaction at rolling contact fatigue loading of rails

scientific article published on 8 January 2009

A two-scale modeling framework for strain localization in solids: XFEM procedures and computational aspects

scientific article published in January 2019

Accounting for lattice coherency in a two-phase elastic-plastic self-consistent model for nickel-based superalloys

scientific article published in November 2018

Adaptive Bridging of Scales in Continuum Modeling Based on Error Control

scientific article published in 2008

Adaptive computational meso–macro-scale modeling of elastic composites

scientific article published in January 2006

Adaptive strategies and error control for computing material forces in fracture mechanics

scientific article published on 8 June 2004

An efficient approach to the analysis of rail surface irregularities accounting for dynamic train–track interaction and inelastic deformations

scientific article published on 7 September 2015

Application-specific error control for parameter identification problems

Assessment of Homogenization Errors in Transient Problems

Bounds on the effective response for gradient crystal inelasticity based on homogenization and virtual testing

scientific article published on 27 March 2019

Calibration of a Nonlinear Elastic Composite With Goal-Oriented Error Control

scientific article published in 2005

Calibration of a class of non-linear viscoelasticity models with adaptive error control

scientific article published on 27 March 2007

Combining spectral and POD modes to improve error estimation of numerical model reduction for porous media

scientific article published on 30 November 2021

Computational Homogenization of Seismic Attenuation in Fractured Rock

scientific article published on 6 July 2017

Computational homogenization based on a weak format of micro-periodicity for RVE-problems

Computational homogenization of coupled consolidation problems in micro-heterogeneous porous media

Computational homogenization of diffusion in three-phase mesoscale concrete

scholarly article by Filip Nilenius et al published 22 March 2014 in Computational Mechanics

Computational homogenization of liquid-phase sintering based on a mixed variational format

Computational homogenization of mesoscale gradient viscoplasticity

scientific article published in April 2017

Computational homogenization of microfractured continua using weakly periodic boundary conditions

Computational homogenization of uncoupled consolidation in micro-heterogeneous porous media

scientific article published on 8 December 2009

Configurational Forces Derived from the Total Variation of the Rate of Global Dissipation

scientific article published in 2009

Construction of macroscale yield surfaces for ductile composites based on a virtual testing strategy

scientific article published in September 2019

ERROR CONTROLLED USE OF THE TAYLOR ASSUMPTION IN ADAPTIVE HIERARCHICAL MODELING OF DSS

Erratum to: Weakly periodic boundary conditions for the homogenization of flow in porous media

scholarly article published in Advanced modeling and simulation in engineering sciences

Estimation of model errors in the calibration of viscoelastic material models

scientific article published on 3 December 2008

Evaluation of crack growth direction criteria on mixed-mode fatigue crack growth experiments

scientific article published in December 2019

Evaluation of mixed-mode crack growth direction criteria under rolling contact conditions

scientific article published in May 2020

Evaluation of stress intensity factors under multiaxial and compressive conditions using low order displacement or stress field fitting

scientific article published in February 2018

FE2 Method for Coupled Transient Diffusion Phenomena in Concrete

Finite element analyses of rail head cracks: Predicting direction and rate of rolling contact fatigue crack growth

scientific article published in November 2024

Finite element analysis of transient thermomechanical rolling contact using an efficient arbitrary Lagrangian–Eulerian description

scholarly article by Andreas Draganis et al published 27 February 2014 in Computational Mechanics

Finite element modelling of frictional thermomechanical rolling/sliding contact using an arbitrary Lagrangian–Eulerian formulation

scientific article published on 24 February 2015

Finite element simulations of thermal residual stresses in realistic 3D WC-Co microstructures

scientific article published in December 2019

Homogenization of coupled flow and deformation in a porous material

Identification of Wheel-Rail Contact Forces Based on Strain Measurement and Finite Element Model of the Rolling Wheel

Identification of viscoelastic properties from numerical model reduction of pressure diffusion in fluid-saturated porous rock with fractures

scientific article published on 16 June 2018

Identification of wheel–rail contact forces based on strain measurements, an inverse scheme and a finite-element model of the wheel

Integrated analysis of dynamic vehicle–track interaction and plasticity induced damage in the presence of squat defects

scientific article published in November 2016

Load identification for a rolling disc: finite element discretization and virtual calibration

scholarly article by Hamed Ronasi et al published 10 August 2011 in Computational Mechanics

Localization aligned weakly periodic boundary conditions

scientific article published on 8 February 2017

Macroscopic diffusivity in concrete determined by computational homogenization

Mesoscale modelling of crack-induced diffusivity in concrete

Modeling and discretization errors in hyperelasto-(visco-)plasticity with a view to hierarchical modeling

scientific article published in December 2004

Numerical evaluation of the transient response due to non-smooth rolling contact using an arbitrary Lagrangian–Eulerian formulation

scientific article published on 3 October 2011

Numerical identification of a viscoelastic substitute model for heterogeneous poroelastic media by a reduced order homogenization approach

Numerical investigation of crack initiation in rails and wheels affected by martensite spots

scientific article published in September 2018

Numerical model reduction with error control in computational homogenization of transient heat flow

scientific article published in November 2017

On a volume averaged measure of macroscopic reinforcement slip in two‐scale modeling of reinforced concrete

scientific article published on 21 December 2019

On bounded approximations of periodicity for computational homogenization of Stokes flow in porous media

scientific article published on 30 June 2016

On computational homogenization of microscale crack propagation

On configurational forces for gradient-enhanced inelasticity

On energetic changes due to configurational motion of standard continua

scientific article published in March 2009

On error controlled numerical model reduction in FE 2 ‐analysis of transient heat flow

scientific article published on 18 March 2019

On statistical strain and stress energy bounds from homogenization and virtual testing

On the Implementation of Plane Stress in Computational Multiscale Modeling

scientific article published in 2006

On the adaptive use of the Taylor assumption in computational homogenization of thin metal sheets

scientific article published in August 2009

On the role of material dissipation for the crack-driving force

scientific article published in July 2010

On the sensitivity of the rate of global energy dissipation due to configurational changes

scientific article published in November 2009

On the variationally consistent computational homogenization of elasticity in the incompressible limit

On two-scale adaptive FE analysis of micro-heterogeneous media with seamless scale-bridging

On-the-Fly Adaptivity for Nonlinear Twoscale Simulations Using Artificial Neural Networks and Reduced Order Modeling

scientific article published on 3 May 2019

Optimization strategy in the development process with application to cast components

scientific article published on 14 March 2007

RVE computations with error control and adaptivity: the power of duality

scientific article published in September 2006

Space-time Finite Elements and Adaptive Strategy for the Coupled Poroelasticity Problem

Space-time finite elements and an adaptive strategy for the coupled thermoelasticity problem

scientific article published in 2002

Space-time finite elements for a simplified thermo-metallurgical problem relevant to casting

scientific article published on 29 September 2006

Strategies for computing goal-orienteda posteriori error measures in non-linear elasticity