List of works - Thomas Rath

A Direct Route Towards Polymer/Copper Indium Sulfide Nanocomposite Solar Cells

A Zero-Dimensional Mixed-Anion Hybrid Halogenobismuthate(III) Semiconductor: Structural, Optical, and Photovoltaic Properties

scientific article published on 21 August 2018

An inter-laboratory stability study of roll-to-roll coated flexible polymer solar modules

article by Suren A. Gevorgyan et al published May 2011 in Solar Energy Materials and Solar Cells

Consensus stability testing protocols for organic photovoltaic materials and devices

article

Copper zinc tin sulfide layers prepared from solution processable metal dithiocarbamate precursors

scientific article published in October 2012

CuInS2–Poly(3-(ethyl-4-butanoate)thiophene) nanocomposite solar cells: Preparation by an in situ formation route, performance and stability issues

article

Electron Beam-Induced Current (EBIC) in solution-processed solar cells.

scientific article

Flexible polymer/copper indium sulfide hybrid solar cells and modules based on the metal xanthate route and low temperature annealing

scientific article published in May 2014

Formation of porous SnS nanoplate networks from solution and their application in hybrid solar cells

scientific article published on 27 May 2015

Honeycomb-structured copper indium sulfide thin films obtained <i>via</i> a nanosphere colloidal lithography method

scientific article published on 24 February 2022

Influence of morphology and polymer:nanoparticle ratio on device performance of hybrid solar cells-an approach in experiment and simulation.

scientific article

Influence of the Iodide to Bromide Ratio on Crystallographic and Optoelectronic Properties of Rubidium Antimony Halide Perovskites

scholarly article published 7 December 2018

Investigation of CuInS2 Thin Film Formation by a Low-Temperature Chemical Deposition Method

scientific article published on 21 December 2011

Investigation of primary crystallite sizes in nanocrystalline ZnS powders: comparison of microwave assisted with conventional synthesis routes

scientific article

Investigation of the Formation of CuInS2Nanoparticles by the Oleylamine Route: Comparison of Microwave-Assisted and Conventional Syntheses

scientific article published on 3 January 2011

Investigation on the formation of copper zinc tin sulphide nanoparticles from metal salts and dodecanethiol

scientific article published in January 2015

Ligand-free preparation of polymer/CuInS2 nanocrystal films and the influence of 1,3-benzenedithiol on their photovoltaic performance and charge recombination properties

scientific article published on 18 December 2018

Metal sulfide–polymer nanocomposite thin films prepared by a direct formation route for photovoltaic applications

Multi-layered nanoscale cellulose/CuInS sandwich type thin films

scientific article published on 26 September 2018

Nanoimprinted Comb Structures in a Low Bandgap Polymer: Thermal Processing and Their Application in Hybrid Solar Cells

scientific article published on 24 April 2014

Polymer/Nanocrystal Hybrid Solar Cells: Influence of Molecular Precursor Design on Film Nanomorphology, Charge Generation and Device Performance.

scientific article published on 25 November 2014

Progress on lead-free metal halide perovskites for photovoltaic applications: a review

scientific article

Real time X-ray scattering study of the formation of ZnS nanoparticles using synchrotron radiation

Structural characterisation of alkyl amine-capped zinc sulphide nanoparticles

scientific article published on 21 December 2011

Structural, optical and charge generation properties of chalcostibite and tetrahedrite copper antimony sulfide thin films prepared from metal xanthates

scientific article published on 17 November 2015

Synthesis and characterization of copper zinc tin chalcogenide nanoparticles: Influence of reactants on the chemical composition

scientific article published in June 2012

Synthesis and characterization of zinc di(O-2,2-dimethylpentan-3-yl dithiocarbonates) bearing pyridine or tetramethylethylenediamine coligands and investigation of their thermal conversion mechanisms towards nanocrystalline zinc sulfide

scientific article published on 01 October 2020

Synthesis of a conjugated pyrrolopyridazinedione-benzodithiophene (PPD-BDT) copolymer and its application in organic and hybrid solar cells.

scientific article published on 30 March 2017

Synthesis of a tetrazine-quaterthiophene copolymer and its optical, structural and photovoltaic properties

scientific article published on 03 April 2019

The Role of Oxygen in the Degradation of Methylammonium Lead Trihalide Perovskite Photoactive Layers

scientific article published on 27 May 2015

The stoichiometry of single nanoparticles of copper zinc tin selenide

scientific article published on 24 December 2010

UV-induced modulation of the conductivity of polyaniline: towards a photo-patternable charge injection layer for structured organic light emitting diodes

article

List of works by Thomas Rath

A Direct Route Towards Polymer/Copper Indium Sulfide Nanocomposite Solar Cells

A Zero-Dimensional Mixed-Anion Hybrid Halogenobismuthate(III) Semiconductor: Structural, Optical, and Photovoltaic Properties

An inter-laboratory stability study of roll-to-roll coated flexible polymer solar modules

Consensus stability testing protocols for organic photovoltaic materials and devices

Copper zinc tin sulfide layers prepared from solution processable metal dithiocarbamate precursors

CuInS2–Poly(3-(ethyl-4-butanoate)thiophene) nanocomposite solar cells: Preparation by an in situ formation route, performance and stability issues

Electron Beam-Induced Current (EBIC) in solution-processed solar cells.

Flexible polymer/copper indium sulfide hybrid solar cells and modules based on the metal xanthate route and low temperature annealing

Formation of porous SnS nanoplate networks from solution and their application in hybrid solar cells

Honeycomb-structured copper indium sulfide thin films obtained <i>via</i> a nanosphere colloidal lithography method

Influence of morphology and polymer:nanoparticle ratio on device performance of hybrid solar cells-an approach in experiment and simulation.

Influence of the Iodide to Bromide Ratio on Crystallographic and Optoelectronic Properties of Rubidium Antimony Halide Perovskites

Investigation of CuInS2 Thin Film Formation by a Low-Temperature Chemical Deposition Method

Investigation of primary crystallite sizes in nanocrystalline ZnS powders: comparison of microwave assisted with conventional synthesis routes

Investigation of the Formation of CuInS2Nanoparticles by the Oleylamine Route: Comparison of Microwave-Assisted and Conventional Syntheses

Investigation on the formation of copper zinc tin sulphide nanoparticles from metal salts and dodecanethiol

Ligand-free preparation of polymer/CuInS2 nanocrystal films and the influence of 1,3-benzenedithiol on their photovoltaic performance and charge recombination properties

Metal sulfide–polymer nanocomposite thin films prepared by a direct formation route for photovoltaic applications

Multi-layered nanoscale cellulose/CuInS sandwich type thin films

Nanoimprinted Comb Structures in a Low Bandgap Polymer: Thermal Processing and Their Application in Hybrid Solar Cells

Polymer/Nanocrystal Hybrid Solar Cells: Influence of Molecular Precursor Design on Film Nanomorphology, Charge Generation and Device Performance.

Progress on lead-free metal halide perovskites for photovoltaic applications: a review

Real time X-ray scattering study of the formation of ZnS nanoparticles using synchrotron radiation

Structural characterisation of alkyl amine-capped zinc sulphide nanoparticles

Structural, optical and charge generation properties of chalcostibite and tetrahedrite copper antimony sulfide thin films prepared from metal xanthates

Synthesis and characterization of copper zinc tin chalcogenide nanoparticles: Influence of reactants on the chemical composition

Synthesis and characterization of zinc di(O-2,2-dimethylpentan-3-yl dithiocarbonates) bearing pyridine or tetramethylethylenediamine coligands and investigation of their thermal conversion mechanisms towards nanocrystalline zinc sulfide

Synthesis of a conjugated pyrrolopyridazinedione-benzodithiophene (PPD-BDT) copolymer and its application in organic and hybrid solar cells.

Synthesis of a tetrazine-quaterthiophene copolymer and its optical, structural and photovoltaic properties

The Role of Oxygen in the Degradation of Methylammonium Lead Trihalide Perovskite Photoactive Layers

The stoichiometry of single nanoparticles of copper zinc tin selenide

UV-induced modulation of the conductivity of polyaniline: towards a photo-patternable charge injection layer for structured organic light emitting diodes

Worldwide outdoor round robin study of organic photovoltaic devices and modules