Search filters

List of works by Annett Gebert

A comparative study of the influence of the deposition technique (electrodeposition versus sputtering) on the properties of nanostructured Fe70Pd30 films

scientific article published on 13 July 2020

Anodically fabricated TiO2–SnO2 nanotubes and their application in lithium ion batteries

scientific article published in 2016

Biomaterial based treatment of osteoclastic/osteoblastic cell imbalance - Gelatin-modified calcium/strontium phosphates

scientific article published on 03 July 2019

Catechol Containing Polyelectrolyte Complex Nanoparticles as Local Drug Delivery System for Bortezomib at Bone Substitute Materials

scientific article published on 24 August 2020

Characterization of corrosion phenomena of Zr–Ti–Cu–Al–Ni metallic glass by SEM and TEM

article

Chemical nanoroughening of Ti40Nb surfaces and its effect on human mesenchymal stromal cell response.

scientific article published on 11 July 2013

Clarifying the mechanism of reverse structuring during electrodeposition in magnetic gradient fields.

scientific article published on 23 February 2012

Comparing the pitting corrosion behavior of prominent Zr-based bulk metallic glasses

Controlled surface modification of Ti-40Nb implant alloy by electrochemically assisted inductively coupled RF plasma oxidation

scientific article

Corrosion Fatigue Studies on a Bulk Glassy Zr-Based Alloy under Three-Point Bending

article

Corrosion of a Zr-based Bulk Metallic Glass with Different Surface Finishing States

article published in 2009

Designing biocompatible Ti-based metallic glasses for implant applications.

scientific article published on 20 November 2012

Designing new biocompatible glass-forming Ti75- x Zr10 Nb x Si15 (x  = 0, 15) alloys: corrosion, passivity, and apatite formation

scientific article published on 21 January 2015

Effect of Nb addition on microstructure evolution and nanomechanical properties of a glass-forming Ti–Zr–Si alloy

scientific article published in March 2014

Effect of indium (In) on corrosion and passivity of a beta-type Ti–Nb alloy in Ringer's solution

scholarly article by Annett Gebert et al published April 2015 in Applied Surface Science

Effect of thermomechanical processing on the mechanical biofunctionality of a low modulus Ti-40Nb alloy

scientific article published on 13 August 2016

Effects of new beta-type Ti-40Nb implant materials, brain-derived neurotrophic factor, acetylcholine and nicotine on human mesenchymal stem cells of osteoporotic and non osteoporotic donors

scientific article published on 28 February 2018

Elastic softening of β-type Ti-Nb alloys by indium (In) additions

scientific article published on 23 July 2014

Electrochemical deposition of hydroxyapatite on beta-Ti-40Nb

Electrodeposition of Sr-substituted hydroxyapatite on low modulus beta-type Ti-45Nb and effect on in vitro Sr release and cell response

scientific article published on 14 November 2019

Enhanced microhardness in nanocomposite Ti60Cu14Ni12Sn4Ta10 processed by high pressure torsion

scientific article published in August 2006

Fatigue properties of a new generation ß-type Ti-Nb alloy for osteosynthesis with an industrial standard surface condition

article

Functionalization of Ti-40Nb implant material with strontium by reactive sputtering

scientific article published on 10 October 2017

Hydrogen and Zr-based metallic glasses: Gas/solid absorption process and structure evolution

Improved plasticity and corrosion behavior in Ti–Zr–Cu–Pd metallic glass with minor additions of Nb: An alloy composition intended for biomedical applications

article

In Situ Electrochemical Analysis during Deformation of a Zr-Based Bulk Metallic Glass: A Sensitive Tool Revealing Early Shear Banding

In situ analysis of three-dimensional electrolyte convection evolving during the electrodeposition of copper in magnetic gradient fields

scientific article published on 5 April 2011

Investigation of early cell-surface interactions of human mesenchymal stem cells on nanopatterned β-type titanium-niobium alloy surfaces

scientific article published on February 2014

Mechanical properties of a two-phase amorphous Ni–Nb–Y alloy studied by nanoindentation

scientific article published in January 2007

Metal release and cell biological compatibility of beta-type Ti-40Nb containing indium.

scientific article published on 26 August 2017

Microstructural inhomogeneities introduced in a Zr-based bulk metallic glass upon low-temperature annealing

scientific article published in September 2008

Nanostructured Ti-Zr-Pd-Si-(Nb) bulk metallic composites: Novel biocompatible materials with superior mechanical strength and elastic recovery.

scientific article published on December 2014

Nanostructured β-phase Ti–31.0Fe–9.0Sn and sub-μm structured Ti–39.3Nb–13.3Zr–10.7Ta alloys for biomedical applications: Microstructure benefits on the mechanical and corrosion performances

Oxidation treatments of beta-type Ti-40Nb for biomedical use

Pitting corrosion behaviour of diamond coated tool steel

Plastic Deformation and Mechanical Softening of Pd40Cu30Ni10P20 Bulk Metallic Glass During Nanoindentation

scientific article published in October 2005

Polyelectrolyte Complex Based Interfacial Drug Delivery System with Controlled Loading and Improved Release Performance for Bone Therapeutics

scientific article published on 22 March 2016

Porous low modulus Ti40Nb compacts with electrodeposited hydroxyapatite coating for biomedical applications

scientific article published on 29 January 2013

Powder metallurgical processing of low modulus β-type Ti-45Nb to bulk and macro-porous compacts

Production of Porous β-Type Ti-40Nb Alloy for Biomedical Applications: Comparison of Selective Laser Melting and Hot Pressing

scientific article published on 06 December 2013

Self-Organized TiO2/CoO Nanotubes as Potential Anode Materials for Lithium Ion Batteries

scientific article published on 22 April 2015

Self-organized double-wall oxide nanotube layers on glass-forming Ti-Zr-Si(-Nb) alloys.

scientific article published on 28 August 2016

Severe plastic deformation of a Ti-based nanocomposite alloy studied by nanoindentation

scientific article published in August 2007

Stress corrosion cracking of a Zr-based bulk metallic glass

Stress-Corrosion Interactions in Zr-Based Bulk Metallic Glasses

Strontium Substitution of Gelatin Modified Calcium Hydrogen Phosphates as Porous Hard Tissue Substitutes

scientific article published on 12 July 2020

Surface treatment, corrosion behavior, and apatite-forming ability of Ti-45Nb implant alloy.

scientific article published on 16 November 2012

The Influence of Deformation-Induced Martensitic Transformations on the Mechanical Properties of Nanocomposite Cu-Zr-(Al) Systems

scientific article published on 16 November 2010

The mechanism of generating nanoporous Au by de-alloying amorphous alloys

Thermal stability and phase transformations of martensitic Ti-Nb alloys

scientific article (publication date: October 2013)

Thermomechanical processing of In-containing β-type Ti-Nb alloys

scientific article published on 29 December 2017

Work-hardening mechanisms of the Ti60Cu14Ni12Sn4Nb10 nanocomposite alloy

scientific article published in October 2009

Yielding and intrinsic plasticity of Ti–Zr–Ni–Cu–Be bulk metallic glass

scientific article published in August 2009

Paulina is supported by:

About Paulina

Help