(Invited) Electrochemistry Meets Heterogeneous Catalysis for the Conversion of CO2 and N2 to Fuels and Chemicals

scientific article published in May 2020

(Invited) Electrochemistry Meets Heterogeneous Catalysis: Solid Acid Based Electrochemical Cells Using Cu- and Pt-Based Electrodes in CO2 Containing Atmospheres

scientific article published on 11 July 2020

A versatile salt evaporation reactor system for SOFC operando studies on anode contamination and degradation with impedance spectroscopy

B-site substituted lanthanum strontium ferrites as electrode materials for electrochemical applications

scientific article

Ceramic Fuel Cells: Principles, Materials, and Applications

Characterisation of Mixed Conducting La-Sr-Fe Perovskites for Application in Solid Oxide Fuel Cells

Charge Localization in the Lithium Iron Phosphate Li3Fe2(PO4)3 at High Voltages in Lithium-Ion Batteries.

scientific article published on 7 September 2015

Combining Transition Metals – An Approach towards High-Performing Coking Tolerant Solid Oxide Fuel Cell Anodes

Composite Fe – BaCe0.2Zr0.6Y0.2O2.9Anodes for Proton Conductor Fuel Cells

scientific article published in 2014

Conductivity at Low Humidity of Materials Derived from Ferroxane Particles

Development of redox stable fuel electrode supported solid oxide cells

Direct Coal Oxidation in Modified Solid Oxide Fuel Cells

Direct Coal Oxidation in Modified Solid Oxide Fuel Cells

Effect of Ru/CGO versus Ni/CGO Co-Infiltration on the Performance and Stability of STN-Based SOFCs

Effect of graphite pore former on oxygen electrodes prepared with La0.6Sr0.4CoO3−δ nanoparticles

Electrical conductivities and chemical stabilities of mixed conducting pyrochlores for SOFC applications

Electrical conductivity of titanium pyrophosphate between 100 and 400 °C: effect of sintering temperature and phosphorus content

scientific article published on 30 August 2013

Electrochemical Characterization of Ceramic SOFC Anodes

Electrochemical Impedance Spectroscopy of Electrospun La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3– δ Nanorod Cathodes for Intermediate Temperature – Solid Oxide Fuel Cells

Electrochemical Reduction of CO 2 at Temperatures Below 300 o C

Electrochemical impedance spectroscopy of La0.6Sr0.4Co0.2Fe0.8O3-δ nanofiber cathodes for intermediate temperature-solid oxide fuel cell applications: A case study for the ‘depressed’ or ‘fractal’ Gerischer element

Electrochemical study of symmetrical intermediate temperature - solid oxide fuel cells based on La0.6Sr0.4MnO3 / Ce0.9Gd0.1O1.95 for operation in direct methane / air

Electron hole–phonon interaction, correlation of structure, and conductivity in single crystal La0.9Sr0.1FeO3−δ

Erratum: In Situ Studies of Fe 4+ Stability in Li 3 Fe 2 (PO 4 ) 3 Cathodes for Li Ion Batteries [ J. Electrochem. Soc., 162, A531 (2015)]

Fabrication and Electrochemical Performance of Zn-Doped La0.2Sr0.25Ca0.45TiO3 Infiltrated with Nickel-CGO, Iron, and Cobalt as an Alternative Anode Material for Solid Oxide Fuel Cells

Flame Spray Synthesis of Nanoscale La0.6Sr0.4Co0.2Fe0.8O3-δ and Ba0.5Sr0.5Co0.8Fe0.2O3-δ as Cathode Materials for Intermediate Temperature Solid Oxide Fuel Cells

Flame spray synthesis and characterisation of stabilised ZrO2 and CeO2 electrolyte nanopowders for SOFC applications at intermediate temperatures

article

Full Ceramic Fuel Cells Based on Strontium Titanate Anodes, an Approach towards More Robust SOFCs

Impedance and Stability of M/CGO (M: Ni, Pd, Ru) Co-infiltrated Nb-doped SrTiO3 SOFC Anodes

In Situ Studies of Fe 4+ Stability in β -Li 3 Fe 2 (PO 4 ) 3 Cathodes for Li Ion Batteries

Influence of A-Site Variation and B-Site Substitution on the Physical Properties of (La,Sr)FeO3 Based Perovskites

scientific article

La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3-δ nanofiber cathode for intermediate-temperature solid oxide fuel cells by water-based sol-gel electrospinning: Synthesis and electrochemical behaviour

Materials design for perovskite SOFC cathodes

scientific article

Modified strontium titanates: from defect chemistry to SOFC anodes

Molecular speciation of sulfur in solid oxide fuel cell anodes with X-ray absorption spectroscopy

article

Need for In Operando Characterization of Electrochemical Interface Features

scientific article published on 15 May 2015

Ni-Based Solid Oxide Cell Electrodes

On the synthesis and performance of flame-made nanoscale La0.6Sr0.4CoO3−δ and its influence on the application as an intermediate temperature solid oxide fuel cell cathode

Operando characterization of metallic and bimetallic electrocatalysts for SOFC fuel electrodes operating under internal methane reforming conditions

Optimizing solid oxide fuel cell cathode processing route for intermediate temperature operation

article published in 2013

Performance Characterization of Solid Oxide Cells Under High Pressure

scientific article published on 2 July 2015

Performance of Electrolyte Supported Solid Oxide Fuel Cells with STN Anodes

Phase Composition and Long-Term Conductivity of Acceptor Doped Ce(PO 3 ) 4 and CeP 2 O 7 with Variable P/Metal Ratio and of CeP 2 O 7 -KH 2 PO 4 Composite

Plasma properties during magnetron sputtering of lithium phosphorous oxynitride thin films

Pre-edges in oxygen (1s) x-ray absorption spectra: A spectral indicator for electron hole depletion and transport blocking in iron perovskites

article

Production and properties of substituted LaFeO3-perovskite tubular membranes for partial oxidation of methane to syngas

Proton diffusivity in the BaZr0.9Y0.1O3−δ proton conductor

Reaction of Hydrogen/Water Mixtures on Nickel‐Zirconia Cermet Electrodes: I. DC Polarization Characteristics

Reaction of Hydrogen/Water Mixtures on Nickel‐Zirconia Cermet Electrodes: II. AC Polarization Characteristics

Realising Reliable, Durable, Energy Efficient and Cost Effective SOFC Systems (Real-SOFC)

Scaling up aqueous processing of A-site deficient strontium titanate for SOFC anode supports

Silver Modified Cathodes for Solid Oxide Fuel Cells

Synthesis and electrochemical characterization of La0.6Sr0.4Co0.2Fe0.8O3–δ / Ce0.9Gd0.1O1.95 co-electrospun nanofiber cathodes for intermediate-temperature solid oxide fuel cells

Synthesis, characterization, fabrication, and electrochemical performance of transition metal doped LSCTA- as anode candidates for SOFCS

Testing Novel Nickel and Cobalt Infiltrated STN Anodes for Carbon Tolerance using In Situ Raman Spectroscopy and Electrochemical Impedance Spectroscopy

The Integrated Project SOFC600 Development of Low-temperature SOFC

article

The Rheology of Stabilised Lanthanum Strontium Cobaltite Ferrite Nanopowders in Organic Medium Applicable as Screen Printed SOFC Cathode Layers

Understanding the electrocatalytic activity of transition metal nanoparticles for solid oxide cell fuel electrodes

Valence changes of manganese and praseodymium in Pr1−xSrxMn1−yInyO3−δ perovskites upon cation substitution as determined with XANES and ELNES

scholarly article by Jörg Richter et al published January 2008 in Physica B

What does carbon tolerant really mean? Operando vibrational studies of carbon accumulation on novel solid oxide fuel cell anodes prepared by infiltration

scientific article published on 27 April 2020