Search filters

List of works by Thierry Baudin

Additive layer manufacturing of titanium matrix composites using the direct metal deposition laser process

scholarly article by S. Pouzet et al published November 2016 in Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing

An EBSD analysis of Fe-36%Ni alloy processed by HPT at ambient and a warm temperature

article

An Investigation of Microtexture Evolution in an AlMgSi Alloy Processed by High-Pressure Torsion

An examination of microstructural evolution in a Cu–Ni–Si alloy processed by HPT and ECAP

Analysis of laser shock waves and resulting surface deformations in an Al–Cu–Li aluminum alloy

scholarly article by Patrice Peyre et al published 6 August 2012 in Journal of Physics D

Annealing twin formation and recrystallization study of cold-drawn copper wires from EBSD measurements

article by Thierry Baudin et al published October 2007 in Materials Characterization

Barkhausen noise measurements give direct observation of magnetocrystalline anisotropy energy in ferromagnetic polycrystals

Basement shear zones development and shortening kinematics in the Ecrins Massif, Western Alps

article

Basement-cover relationships in the Tambo nappe (Central Alps, Switzerland): geometry, structure and kinematics

article

Characterisation of transgranular crack propagation by EBSD in a soft steel

Characterization at a local scale of a laser-shock peened aluminum alloy surface

scholarly article by B. Rouleau et al published June 2011 in Applied Surface Science

Characterization of Explosive Weld Joints by TEM and SEM/EBSD

Comparison between ARB and CARB processes on an AA5754/AA6061 composite

Comparison between recrystallization mechanisms in copper and Ti-IF steel after a low amount of deformation

Comparison of four arc welding processes used for aluminium alloy cladding

Constraints on the Ediacaran inertial interchange true polar wander hypothesis: A new paleomagnetic study in Morocco (West African Craton)

scholarly article by B. Robert et al published July 2017 in Precambrian Research

Copper Refinement from Anode to Cathode and then to Wire Rod: Effects of Impurities on Recrystallization Kinetics and Wire Ductility.

scientific article published in October 2015

Crystallographic Aspects of Deformation and Recrystallization in ECAP-Processed AA3104 Aluminium Alloy

Deformation and Recrystallised Texture Evolution and the Followed Mechanical and Electrical Properties of Drawn and Annealed Copper Wires

Deformation textures in wire drawn perlitic steel

Development of an in situ method for measuring elastic and total strain fields at the grain scale with an estimation of accuracy

Direct Correspondence between the Volumic Fractions Found by Texture Analysis with the Vector Method and the Harmonic Method and Inverse Correspondence

Dynamic Recrystallization Modeling during Hot Forging of a Nickel Based Superalloy

scholarly article published January 2010

Dynamic Recrystallization in Similar 5182 Al/Al and Dissimilar Al/Fe Friction Stir Spot Welds

EBSD Study of Grain Boundary Evolution after Different Cold Rolling Reduction in Duplex Steel

article

EBSD characterization of an IF steel processed by Accumulative Roll Bonding

EBSD study of hydrogen-induced cracking in API-5L-X46 pipeline steel

EBSD study of the microstructure evolution in a commercially pure aluminium severely deformed by ECAP

Early Stages of Recrystallization in Equal-Channel Angular Pressing (ECAP)-Deformed AA3104 Alloy Investigated Using Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM) Orientation Mappings

article

Effect of Annealing Atmosphere on the Recrystallized Texture and Abnormal Grain Growth of Ni-5%W Alloy Sheets

Effect of Strain Path on Microstructure and Texture Development in ECAP Processed AA3104 Alloy

article

Effect of TiO2 and SrO additions on some physical properties of 33Na2O–xSrO–xTiO2–(50 − 2x)B2O3–17P2O5 glasses

article

Effect of aging on microstructural development in an Al–Mg–Si alloy processed by high-pressure torsion

article

Effect of impurities on the recrystallization texture in commercially pure copper-ETP wires

Effect of long range order on mechanical properties of partially recrystallized Fe49Co–2V alloy

Effect of microalloying elements on the Cube texture formation of Fe48%Ni alloy tapes

Effect of recrystallization and degree of order on the magnetic and mechanical properties of soft magnetic FeCo–2V alloy

Effect of temperature on the processing of a magnesium alloy by high-pressure torsion

scholarly article by Yi Huang et al published 30 May 2012 in Journal of Materials Science

Elaboration and structural characterization of glasses inside the ternary SrO-TiO2-P2O5 system

Evolution of Mechanical and Electrical Properties During Annealing of the Copper Wire Drawn

Evolution of Strength and Homogeneity in a Magnesium AZ31 Alloy Processed by High-Pressure Torsion at Different Temperatures

scholarly article by Yi Huang et al published 20 July 2012 in Advanced Engineering Materials

Experimental study of microstructure changes due to low cycle fatigue of a steel nanocrystallised by Surface Mechanical Attrition Treatment (SMAT)

article

Formation and Development of Strong Cube Recrystallization Texture in an Aluminium of Commercial Purity

article

Formation of annealing twins during primary recrystallization of two low stacking fault energy Ni-based alloys

Generalized Pole Figures and Stored Energy Distribution Function Obtained by X-Ray Diffraction

Geochronological constraints on the polycyclic magmatism in the Bou Azzer-El Graara inlier (Central Anti-Atlas Morocco)

scholarly article by O. Blein et al published November 2014 in Journal of African Earth Sciences

Glass and glass-ceramics along the SrTiO3-NaPO3line

Grain Growth Simulation by Monte Carlo Method in a HiB Fe 3% Si Alloy

Grain boundary character distribution of CuNiSi and FeNi alloys processed by severe plastic deformation

In Situ EBSD Investigation of Recrystallization in a Partially Annealed and Cold-Rolled Aluminum Alloy of Commercial Purity

scholarly article by Anne-Laure Helbert et al published 27 September 2011 in Advanced Engineering Materials

In Situ Electron Backscatter Diffraction Investigation of Recrystallization in a Copper Wire

In memoriam tribute to Richard Penelle (1936-2012)

Influence of FSSW parameters on fracture mechanisms of 5182 aluminium welds

article published in 2010

Influence of Sulfur on the Recrystallization and {100}〈001〉 Cube Texture Formation in Fe48%Ni Alloys Tapes

Influence of neighbourhood on abnormal Goss grain growth in Fe–3% Si steels: Formation of island grains in the large growing grain

Influence of stored energy on twin formation during primary recrystallization

article by W. Wang et al published January 2014 in Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing

Intermetallic compounds in Al 6016/IF-steel friction stir spot welds

Investigation of the relationships between mechanical properties and microstructure in a Fe-9%Cr ODS steel

Local Orientation Changes during Shear Banding of Copper Single Crystals Compressed in Channel-Die

Magnetostrictive and magnetic effects in Fe-27%Co laminations

Measurement of Complementary Strain Fields at the Grain Scale

Measurement of stored energy in Fe–48%Ni alloys strongly cold-rolled using three approaches: Neutron diffraction, Dillamore and KAM approaches

Microstructural Evolution Modelling of Nickel Base Superalloy during Forging

scholarly article published January 2010

Microstructural Evolution and Texture Analysis in a Thermomechanically Processed Low SFE Super-Austenitic Steel (Alloy-28)

Microstructural Evolution in an Al-6061 Alloy Processed by High-Pressure Torsion and Rapid Annealing

Microstructural and textural characterization of copper processed by ECAE

Microstructural evolution and mechanical properties on an ARB processed IF steel studied by X-ray diffraction and EBSD

Microstructural evolution in an Al-6061 alloy processed by high-pressure torsion

Microstructure Evolution during the Accumulative Roll Bonding Process in Armco Iron

Microstructure and Texture Evolution of a Cold Rolled Ni-Cr-W Alloy after Annealing

article published in 2011

Microstructure and Texture Evolutions in AA1200 Aluminum Alloy Deformed by Accumulative Roll Bonding Method

scholarly article published March 2012

Microstructure and microtexture evolution with aging treatment in an Al–Mg–Si alloy severely deformed by HPT

Microstructure and texture evolution during the ultra grain refinement of the Armco iron deformed by accumulative roll bonding (ARB)

Microstructure and texture evolution in a Cu–Ni–Si alloy processed by equal-channel angular pressing

Microstructure and texture evolution in a magnesium alloy during processing by high-pressure torsion

scholarly article by Yi Huang et al published 25 February 2013 in Materials Research

Microstructure, mechanical properties and texture of an AA6061/AA5754 composite fabricated by cross accumulative roll bonding

Microstructures and textures of a Cu–Ni–Si alloy processed by high-pressure torsion

Monte Carlo Simulation of Grain Growth in Fe-3 % Si Steels by Consideration of a Morphological Parameter

article published in 2010

Monte Carlo simulation of primary recrystallization and annealing twinning

Multi-scale analysis by SEM, EBSD and X-ray diffraction of deformation textures of a copper wire drawn industrially

Multiscale modeling of a low magnetostrictive Fe-27wt%Co-0.5wt%Cr alloy

article published in 2018

New geochemical, geochronological and structural constraints on the Ediacaran evolution of the south Sirwa, Agadir-Melloul and Iguerda inliers, Anti-Atlas, Morocco

scholarly article by O. Blein et al published October 2014 in Journal of African Earth Sciences

Nucleation of Recrystallization in Fine Grained AA3104 Alloy Analyzed by SEM and TEM Orientation Mappings

On the non-existence of a Cadomian basement in southern France (Pyrenees, Montagne Noire): implications for the significance of the pre-Variscan (pre-Upper Ordovician) series

article

On the role of crystallographic texture in mitigating hydrogen-induced cracking in pipeline steels

On the stored energy evolution after accumulative roll-bonding of invar alloy

Orientation changes near the interface of explosively bonded (carbon steel)/Zr700 sheets

Peneplanation and lithosphere dynamics in the Pyrenees

article

Polycyclic magmatism in the Tagragra d’Akka and Kerdous–Tafeltast inliers (Western Anti-Atlas, Morocco)

scholarly article by D. Gasquet et al published June 2004 in Journal of African Earth Sciences

Primary Recrystallization of Invar, Fe-36%Ni Alloy: Origin and Development of the Cubic Texture

article

Quantitative infrared analysis of welding processes: temperature measurement during RSW and CMT-MIG welding

article published in 2013

Recrystallization Texture in Fe 3% Si Alloys Obtained by Direct Casting: Characterization by EBSD and X-Ray Diffraction

Recrystallization and Grain Growth due to Annealing of an Ultrafine-Grained Al Alloy

Recrystallization in Ultra-Fine Grain Structures of AA3104 Alloy Processed by ECAP and HPT

Recrystallization mechanisms in 5251 H14 and 5251 O aluminum friction stir welds

scholarly article by A.L. Etter et al published February 2007 in Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing

Recrystallization of ECAP-Processed AA4343 Aluminium Alloy Containing Large Second Phase Particles

Reinforcement of the Cube texture during recrystallization of a 1050 aluminum alloy partially recrystallized and 10% cold-rolled

scholarly article by Wei Wang et al published February 2012 in Materials Characterization

Relation between the deformation sub-structure after rolling or tension and the recrystallization mechanisms of an IF steel

Relaxation path of nanoparticles in an oxygen-enriched ferritic oxide-dispersion-strengthened alloy

Role of Crystallographic Texture in Hydrogen-Induced Cracking of Low Carbon Steels for Sour Service Piping

Role of microtexture in the interaction and coalescence of hydrogen-induced cracks

SEM-EBSD Observations of Crack Initiation and Propagation due to Orientation Changes during Forming in Mild Steel

Selective electrodeposition of PbO2 on anodised-polycrystalline titanium

scholarly article by D. Devilliers et al published June 2004 in Electrochimica Acta

Shortening of the European Dauphinois margin (Oisans Massif, Western Alps): New insights from RSCM maximum temperature estimates and 40Ar/39Ar in situ dating

article

Simulation of Rolling and Deep Drawing Textures in Ferritic Steels: Application to Ear Profile Calculation in Deep Drawing

Simulation of primary recrystallization from TEM observations and neutron diffraction measurements

article published in 2004

Some Major Features in Texture and Anisotropy Field

Soudage homogène MIG de l'alliage d'aluminium 6061

Stored energy evolution in both phases of a duplex steel as a function of cold rolling reduction

article published in 2006

Structural and Dielectric Properties of BaTiO3-NaPO3 Glass-Ceramics

Study of Inconel 718 weldability using MIG CMT process

Study of Microstructural and Mechanical Behavior of Mild Steel Wires Cold Drawn at TREFISOUD

Study of Refined Microstructures after Two-Step Heat Treatments by Means of EBSD Technique on γ-TiAl Alloys

Study of texture, mechanical and electrical properties of cold drawn AGS alloy wire

Study of the Relation between Microstructure and Properties (Mechanical/Electrical) of Copper Wire Drawing and Annealed

article published in 2013

Study of the development of the cube texture in Fe-50%Ni during recrystallization and normal grain growth

article

Sur l’origine karstique et l’âge plio-quaternaire des accumulations bréchiques dites «brèches marines et paléocènes» d’Amélie-les-Bains (Pyrénées-Orientales, France)

article

TEM study of recovery and recrystallization mechanisms after 40% cold rolling in an IF-Ti steel

Tem Study of Recrystallization in Ultra-Fine Grain AA3104 Alloy Processed by High-Pressure Torsion

Texture Evolution of Armco Iron during Accumulative Roll Bonding Process

Texture and Microstructure of Invar ® Deformed by Asymmetrical Rolling

Texture and microhardness of Mg-Rare Earth (Nd and Ce) alloys processed by high-pressure torsion

Texture and microstructure evolution of Fe–Ni alloy after accumulative roll bonding

article published in 2014

Texture evolution of an Fe–Ni alloy sheet produced by cross accumulative roll bonding

Texture, microstructure and mechanical properties evolution in Fe-x (x = 36 and 48 wt.%) Ni alloy after accumulative roll bonding

The Effect of the Strain Path and the Second Phase Particles on the Microstructure and the Texture Evolution of the AA3104 Alloy Processed by ECAP

The Influence of Aging on Industrially Cold Drawn Aluminum Alloy (6101) Used in the Electric Transmission Lines

article

The effect of Ti/Y ratio on the recrystallisation behaviour of Fe–14%Cr oxide dispersion-strengthened alloys

Thermal stability of Cu-Cr-Zr alloy processed by equal-channel angular pressing

U-Pb zircon (ID-TIMS and SHRIMP) evidence for the early ordovician intrusion of metagranites in the late Proterozoic Canaveilles Group of the Pyrenees and the Montagne Noire (France)

article

Ultrafine grains and the Hall–Petch relationship in an Al–Mg–Si alloy processed by high-pressure torsion

Zircon U–Pb geochronology of Ordovician magmatism in the polycyclic Ruitor Massif (Internal W Alps)

scholarly article by François Guillot et al published 20 December 2005 in International Journal of Earth Sciences

Zircon U–Pb geochronology of Ordovician magmatism in the polycyclic Ruitor Massif (Internal W Alps)

scholarly article by François Guillot et al published December 2002 in International Journal of Earth Sciences

Étude des déformations élastiques résiduelles dans les quartzites

Paulina is supported by:

About Paulina

Help