Search filters

List of works by Ning Li

A Cost-Effective, Aqueous-Solution-Processed Cathode Interlayer Based on Organosilica Nanodots for Highly Efficient and Stable Organic Solar Cells

scientific article published on 13 August 2020

A Cross‐Linked Interconnecting Layer Enabling Reliable and Reproducible Solution‐Processing of Organic Tandem Solar Cells

scientific article published in March 2020

A General Guideline for Vertically Resolved Imaging of Manufacturing Defects in Organic Tandem Solar Cells

scientific article published on 14 May 2020

A generic concept to overcome bandgap limitations for designing highly efficient multi-junction photovoltaic cells

scientific article published on 16 July 2015

A generic green solvent concept boosting the power conversion efficiency of all-polymer solar cells to 11%

scientific article published in 2019

A generic interface to reduce the efficiency-stability-cost gap of perovskite solar cells.

scientific article published on 9 November 2017

A pressure process for efficient and stable perovskite solar cells

scientific article published in November 2020

A solution-processable star-shaped molecule for high-performance organic solar cells via alkyl chain engineering and solvent additive

scientific article published in January 2013

A solution-processed barium hydroxide modified aluminum doped zinc oxide layer for highly efficient inverted organic solar cells

scientific article published on 12 September 2014

A top-down strategy identifying molecular phase stabilizers to overcome microstructure instabilities in organic solar cells

scientific article published in 2019

A universal method to form the equivalent ohmic contact for efficient solution-processed organic tandem solar cells

scientific article published in 2014

Abnormal strong burn-in degradation of highly efficient polymer solar cells caused by spinodal donor-acceptor demixing

scientific article published on 22 February 2017

Achieving Efficient Thick Film All-polymer Solar Cells Using a Green Solvent Additive

scientific article published on 27 November 2019

Air-processed organic tandem solar cells on glass: toward competitive operating lifetimes

scientific article published in 2015

Air-processed polymer tandem solar cells with power conversion efficiency exceeding 10%

scientific article published in 2015

An Efficient Solution-Processed Intermediate Layer for Facilitating Fabrication of Organic Multi-Junction Solar Cells

scientific article published on 16 July 2013

An Operando Study on the Photostability of Nonfullerene Organic Solar Cells

scientific article published on 7 May 2019

Analyzing the efficiency, stability and cost potential for fullerene-free organic photovoltaics in one figure of merit

Assembling Mesoscale-Structured Organic Interfaces in Perovskite Photovoltaics

scientific article published on 11 January 2019

Axisymmetric and Asymmetric Naphthalene-Bisthienothiophene Based Nonfullerene Acceptors: On Constitutional Isomerization and Photovoltaic Performance

scientific article published on 5 May 2020

Composition Engineering of All‐Inorganic Perovskite Film for Efficient and Operationally Stable Solar Cells

scientific article published on 2 June 2020

Comprehensive Investigation and Analysis of Bulk-Heterojunction Microstructure of High-Performance PCE11:PCBM Solar Cells

scientific article published on 13 May 2019

Controlling additive behavior to reveal an alternative morphology formation mechanism in polymer : fullerene bulk-heterojunctions

Cost analysis of roll-to-roll fabricated ITO free single and tandem organic solar modules based on data from manufacture

article

Delocalization of exciton and electron wavefunction in non-fullerene acceptor molecules enables efficient organic solar cells

scientific article published on 07 August 2020

Design of the Solution-Processed Intermediate Layer by Engineering for Inverted Organic Multi junction Solar Cells

scientific article published on 18 October 2012

Designing ternary blend all-polymer solar cells with an efficiency of over 10% and a fill factor of 78%

scientific article published in September 2018

Determination of phase diagrams of binary and ternary organic semiconductor blends for organic photovoltaic devices

scientific article published in December 2011

Discriminating bulk versus interface shunts in organic solar cells by advanced imaging techniques

scientific article published on 7 March 2019

Dual Interfacial Design for Efficient CsPbI2 Br Perovskite Solar Cells with Improved Photostability

scientific article published on 11 April 2019

Effects on Photovoltaic Characteristics by Organic Bilayer- and Bulk-Heterojunctions: Energy Losses, Carrier Recombination and Generation

scientific article published on 03 December 2020

Efficient Exciton Diffusion in Organic Bilayer Heterojunctions with Nonfullerene Small Molecular Acceptors

scientific article published on 21 April 2020

Efficient Organic Solar Cells with Extremely High Open-Circuit Voltages and Low Voltage Losses by Suppressing Nonradiative Recombination Losses

scientific article published on 29 July 2018

Efficient Polymer Solar Cells Based on Non-fullerene Acceptors with Potential Device Lifetime Approaching 10 Years

scientific article published in January 2019

Efficient Surface Passivation and Electron Transport Enable Low Temperature-Processed Inverted Perovskite Solar Cells with Efficiency over 20%

scientific article published on 26 May 2020

Engineering of the Electron Transport Layer/Perovskite Interface in Solar Cells Designed on TiO 2 Rutile Nanorods

scientific article published on 9 January 2020

Environmentally Printing Efficient Organic Tandem Solar Cells with High Fill Factors: A Guideline Towards 20% Power Conversion Efficiency

scientific article published on 27 March 2014

Evidencing Excellent Thermal‐ and Photostability for Single‐Component Organic Solar Cells with Inherently Built‐In Microstructure

scientific article published on 8 April 2019

Exploring the Limiting Open-Circuit Voltage and the Voltage Loss Mechanism in Planar CH3NH3PbBr3Perovskite Solar Cells

scientific article published on 22 June 2016

Exploring the Stability of Novel Wide Bandgap Perovskites by a Robot Based High Throughput Approach

scientific article published on 4 October 2017

Extending the environmental lifetime of unpackaged perovskite solar cells through interfacial design

Facile Fabrication of Superhydrophobic and Eco-Friendly Poly(lactic acid) Foam for Oil-Water Separation via Skin Peeling

scientific article published on 05 April 2019

Favorable Mixing Thermodynamics in Ternary Polymer Blends for Realizing High Efficiency Plastic Solar Cells

scientific article published in April 2019

Fine-tuning of the chemical structure of photoactive materials for highly efficient organic photovoltaics

scientific article from 'Nature Energy' published on 16 October 2018

Flexible organic tandem solar modules with 6% efficiency: combining roll-to-roll compatible processing with high geometric fill factors

scientific article published in 2014

Flexible organic tandem solar modules: a story of up-scaling

scientific article published on 6 October 2014

From fullerene acceptors to non-fullerene acceptors: prospects and challenges in the stability of organic solar cells

scientific article published in 2019

Fully printed organic tandem solar cells using solution-processed silver nanowires and opaque silver as charge collecting electrodes

scientific article published in 2015

Fully solution-processing route toward highly transparent polymer solar cells

scientific article published on 2 October 2014

Graded 2D/3D Perovskite Heterostructure for Efficient and Operationally Stable MA-Free Perovskite Solar Cells

scientific article published on 25 May 2020

High Fill Factor Polymer Solar Cells Incorporating a Low Temperature Solution Processed WO3Hole Extraction Layer

scientific article published on 13 August 2012

High fill factor polymer solar cells comprising a transparent, low temperature solution processed doped metal oxide/metal nanowire composite electrode

scientific article published in December 2012

High-Performance Green Solvent Processed Ternary Blended All-Polymer Solar Cells Enabled by Complementary Absorption and Improved Morphology

scientific article published on 19 August 2018

High-Performance Thick-Film All-Polymer Solar Cells Created Via Ternary Blending of a Novel Wide-Bandgap Electron-Donating Copolymer

Highly efficient organic tandem solar cells: a follow up review

scientific article published in 2013

IR sensitization of an indene-C60 bisadduct (ICBA) in ternary organic solar cells

scientific article published in 2013

ITO-Free and Fully Solution-Processed Semitransparent Organic Solar Cells with High Fill Factors

scientific article published on 5 April 2013

Improved Efficiency of Polymer Solar Cells by Modifying the Side Chain of Wide-Band Gap Conjugated Polymers Containing Pyrrolo[3,4-f]benzotriazole-5,7(6H)-dione Moiety

scientific article published on 22 June 2018

Influence of Thiazole-Modified Carbon Nitride Nanosheets with Feasible Electronic Properties on Inverted Perovskite Solar Cells

scientific article published on 30 July 2019

Influence of a ternary donor material on the morphology of a P3HT:PCBM blend for organic photovoltaic devices

scientific article published in 2012

Innovative architecture design for high performance organic and hybrid multi-junction solar cells

scientific article published on 25 August 2017

Inorganic Halide Perovskite Solar Cells: Progress and Challenges

scientific article published on 27 April 2020

Interface Molecular Engineering for Laminated Monolithic Perovskite/Silicon Tandem Solar Cells with 80.4% Fill Factor

scientific article published on 7 August 2019

Interface engineering with a novel n-type small organic molecule for efficient inverted perovskite solar cells

scientific article published in July 2020

Introducing a New Potential Figure of Merit for Evaluating Microstructure Stability in Photovoltaic Polymer-Fullerene Blends

scientific article published on 15 August 2017

Inverted structure organic photovoltaic devices employing a low temperature solution processed WO3 anode buffer layer

scientific article published in November 2012

Ligand Tuning of Localized Surface Plasmon Resonances in Antimony-Doped Tin Oxide Nanocrystals

scientific article published in 2022

Low-temperature solution-processed metal oxide buffer layers fulfilling large area production requirements

scientific article published on 27 September 2012

Microstructure instabilities in solution-processed organic bulk-heterojunction solar cells

scientific article published in June 2018

Morphology Optimization via Side Chain Engineering Enables All-Polymer Solar Cells with Excellent Fill Factor and Stability

scientific article published on 09 July 2018

Morphology optimization via molecular weight tuning of donor polymer enables all-polymer solar cells with simultaneously improved performance and stability

scientific article published in October 2019

Nanocrystal V2O5 thin film as hole-extraction layer in normal architecture organic solar cells

scientific article published in December 2012

Near IR sensitization of polymer/fullerene solar cells

scientific article published on 13 September 2012

Non-fullerene acceptors end-capped with an extended conjugation group for efficient polymer solar cells

Optimization of processing solvent and film morphology to achieve efficient non-fullerene polymer solar cells processed in air

scientific article published in 2020

Optimizing Microstructure Morphology and Reducing Electronic Losses in 1 cm2 Polymer Solar Cells to Achieve Efficiency over 15%

scientific article published on 13 September 2019

Organic and perovskite solar modules innovated by adhesive top electrode and depth-resolved laser patterning

scientific article published in 2016

Overcoming Electrode-Induced Losses in Organic Solar Cells by Tailoring a Quasi-Ohmic Contact to Fullerenes via Solution-Processed Alkali Hydroxide Layers

scientific article published on 11 February 2016

Overcoming Interfacial Losses in Solution-Processed Organic Multi-Junction Solar Cells

scientific article published on 7 November 2016

Overcoming Microstructural Limitations in Water Processed Organic Solar Cells by Engineering Customized Nanoparticulate Inks

scientific article published on 22 January 2018

Overcoming efficiency and stability limits in water-processing nanoparticular organic photovoltaics by minimizing microstructure defects

scientific article published in Nature Communications

Overcoming interface losses in organic solar cells by applying low temperature, solution processed aluminum-doped zinc oxide electron extraction layers

scientific article published in 2013

Overcoming the Interface Losses in Planar Heterojunction Perovskite-Based Solar Cells

scientific article published on 4 May 2016

Overcoming the Thermal Instability of Efficient Polymer Solar Cells by Employing Novel Fullerene-Based Acceptors

scientific article published on 17 October 2016

Overcoming the morphological and efficiency limit in all-polymer solar cells by designing conjugated random copolymers containing a naphtho[1,2-c:5,6-c′]bis([1,2,5]thiadiazole)] moiety

scientific article published in 2018

Patterning of organic photovoltaic modules by ultrafast laser

scientific article published on 21 September 2013

Performance Enhancement of the P3HT/PCBM Solar Cells through NIR Sensitization Using a Small-Bandgap Polymer

Qualitative analysis of bulk-heterojunction solar cells without device fabrication: an elegant and contactless method.

scientific article

Realizing solution-processed monolithic PbS QDs/perovskite tandem solar cells with high UV stability

scientific article published in 2018

Revealing Hidden UV Instabilities in Organic Solar Cells by Correlating Device and Material Stability

scientific article published on 3 September 2019

Revealing Minor Electrical Losses in the Interconnecting Layers of Organic Tandem Solar Cells

scientific article published on 28 August 2017

Robot-Based High-Throughput Engineering of Alcoholic Polymer: Fullerene Nanoparticle Inks for an Eco-Friendly Processing of Organic Solar Cells

scientific article published on 27 June 2018

Roll to roll compatible fabrication of inverted organic solar cells with a self-organized charge selective cathode interfacial layer

scientific article published in 2016

Scalable, ambient atmosphere roll-to-roll manufacture of encapsulated large area, flexible organic tandem solar cell modules

article

Solution-processed parallel tandem polymer solar cells using silver nanowires as intermediate electrode

scientific article published on 25 November 2014

Strain-activated light-induced halide segregation in mixed-halide perovskite solids

Suppressing Nonradiative Recombination in Lead–Tin Perovskite Solar Cells through Bulk and Surface Passivation to Reduce Open Circuit Voltage Losses

scientific article published in 2022

Suppression of Hysteresis Effects in Organohalide Perovskite Solar Cells

Surpassing the 10% efficiency milestone for 1-cm2 all-polymer solar cells

scientific article published on 10 September 2019

Ternary All-Polymer Solar Cells With 8.5% Power Conversion Efficiency and Excellent Thermal Stability

scientific article published on 21 April 2020

The role of connectivity in significant bandgap narrowing for fused-pyrene based non-fullerene acceptors toward high-efficiency organic solar cells

scientific article published in 2020

Thermal-Driven Phase Separation of Double-Cable Polymers Enables Efficient Single-Component Organic Solar Cells

scientific article published in July 2019

Towards 15% energy conversion efficiency: a systematic study of the solution-processed organic tandem solar cells based on commercially available materials

scientific article published in 2013

Towards a full understanding of regioisomer effects of indene-C60 bisadduct acceptors in bulk heterojunction polymer solar cells

Towards large-scale production of solution-processed organic tandem modules based on ternary composites: Design of the intermediate layer, device optimization and laser based module processing

scientific article published in January 2014

Understanding the correlation and balance between the miscibility and optoelectronic properties of polymer–fullerene solar cells

scientific article published in 2017

Unraveling the Microstructure-Related Device Stability for Polymer Solar Cells Based on Nonfullerene Small-Molecular Acceptors

scientific article published on 28 February 2020

Unraveling the influence of non-fullerene acceptor molecular packing on photovoltaic performance of organic solar cells

scientific article published on 26 November 2020

Visualizing and Suppressing Nonradiative Losses in High Open-Circuit Voltage n-i-p-Type CsPbI3 Perovskite Solar Cells

scientific article published on 23 December 2019

Washing away barriers

scientific article published on 18 September 2017

Paulina is supported by:

About Paulina

Help