Search filters

List of works by Danilo Demarchi

3D Printed Vascularized Device for Subcutaneous Transplantation of Human Islets

scientific article published on 22 July 2017

A $0.13~\mu{\rm m}$ CMOS Operational Schmitt Trigger R-to-F Converter for Nanogap-Based Nanosensors Read-Out

A 0.07 mm$^2$ Asynchronous Logic CMOS Pulsed Receiver Based on Radio Events Self-Synchronization

A 0.18μm CMOS low-power radiation sensor for UWB wireless transmission

article

A 0.18μm CMOS low-power radiation sensor for asynchronous event-driven UWB wireless transmission

article

A 130 nm CMOS IR-UWB receiver based on baseband cross-phase detection

A 130 nm Event-Driven Voltage and Temperature Insensitive Capacitive ROC

A 130-nm CMOS 0.007- $\hbox{mm}^{2}$ Ring-Oscillator-Based Self-Calibrating IR-UWB Transmitter Using an Asynchronous Logic Duty-Cycled PLL

A 130nm PMOS drain-degenerated ratioless level-shifter for near-threshold designs

A Flexible Front-End for Wearable Electrochemical Sensing

A Flexible Low-Power 130 nm CMOS Read-Out Circuit With Tunable Sensitivity for Commercial Robotic Resistive Pressure Sensors

A Hardware-In-the-Design Methodology for Wireless Sensor Networks Based on Event-Driven Impulse Radio Ultra-Wide Band

A Low-Power 0.13- $\mu \text{m}$ CMOS IC for ZnO-Nanowire Assembly and Nanowire-Based UV Sensor Interface

A MEMS design methodology for model-order-reduction, based on high-order parametric elements

A Multipurpose CMOS Platform for Nanosensing

scientific article published on 30 November 2016

A Physical-Aware Abstraction Flow for Efficient Design-Space Exploration of a Wireless Body Area Network Application

A Robust Capacitive Digital Read-Out Circuit for a Scalable Tactile Skin

A Top-Down Constraint-Driven Methodology for Smart System Design

A Very Low-Complexity 0.3–4.4 GHz 0.004 mm$ ^{2}$ All-Digital Ultra-Wide-Band Pulsed Transmitter for Energy Detection Receivers

A flexible resistive Read-Out Circuit suitable to multi-purpose ZnO nanostructured transducers for robotic applications

A hybrid quasi-digital/neuromorphic architecture for tactile sensing in humanoid robots

A low complexity wireless microbial fuel cell monitor using piezoresistive sensors and impulse-radio ultra-wide-band

A low-complexity short-distance IR-UWB transceiver for real-time asynchronous ranging

A low-power Read-Out Circuit and low-cost assembly of nanosensors onto a 0.13 μm CMOS Micro-for-Nano chip

A microbial fuel cell powering an all-digital piezoresistive wireless sensor system

A nanogap–array platform for testing the optically modulated conduction of gold–octithiophene–gold junctions for molecular optoelectronics

scholarly article in RSC Advances, vol. 2 no. 29, 2012

A new method of measuring the stiffness of astronauts' EVA gloves

A new validation method for modeling nanogap fabrication by electromigration, based on the Resistance–Voltage (R–V) curve analysis

article by Ismael Rattalino et al published June 2012 in Physics Letters

A non-coherent IR-UWB receiver for high sensitivity short distance estimation

A quasi-digital radio system for muscle force transmission based on event-driven IR-UWB

article

A wireless address-event representation system for ATC-based multi-channel force wireless transmission

article

A wireless transmission low-power radiation sensor for in vivo dosimetry

article

Accuracy and feasibility of piezoelectric inkjet coating technology for applications in microneedle-based transdermal delivery

Activated carbonized pistachio nut shells for electrochemiluminescence detection

article by M. Noman et al published 14 March 2015 in Journal of Applied Electrochemistry

An Analog-Mode Impulse Radio System for Ultra-Low Power Short-Range Audio Streaming

An European Project on Web-based Education in Nanoelectronics

article published in 2013

An IoT Solution for Online Monitoring of Anesthetics in Human Serum Based on an Integrated Fluidic Bioelectronic System

scientific article published on 31 July 2018

An accurate electro-thermal model of SiC power mosfets for fast simulations

scholarly article published February 2018

An electronic platform for real-time detection of bovine serum albumin by means of amine-functionalized zinc oxide microwires

scholarly article in RSC Advances, vol. 6 no. 2, 2016

An integrated LOC hydrodynamic focuser with a CNN-based camera system for cell counting application

article published in 2011

An integrated and mixed technology LOC hydrodynamic focuser for cell counting application

Architecture and procedures for pH and temperature monitoring in medical applications

Assessing the Feasibility of Augmenting Fall Detection Systems by Relying on UWB-Based Position Tracking and a Home Robot

scientific article published on 18 September 2020

Asynchronous DC-free serial protocol for event-based AER systems

Bioprinting 3D microfibrous scaffolds for engineering endothelialized myocardium and heart-on-a-chip

scientific article

Bis-Ferrocene Molecular QCA Wire: Ab Initio Simulations of Fabrication Driven Fault Tolerance

Capacitive coupling analysis using double-surface ICs for low cost passive RFID tags

Carbon Nanotubes as an Effective Opportunity for Cancer Diagnosis and Treatment.

scientific article

Carbon nanotube electrodes for electrochemiluminescence biosensors

scientific article published on January 2010

Carbon nanotube electrodes for electrochemiluminescence biosensors

Carbon nanotube electrodes for electrochemiluminescence biosensors

Carbon-based materials for ECL detection

Cell-based digital microfluidic chip for drug mixing and droplets generation: Design and simulation

Charge distribution in a molecular QCA wire based on bis-ferrocene molecules

Commercial tactile sensors for hand exoskeletons: practical considerations for ultra-low cost and very-low complexity read-out

Comparison of unusual carbon-based working electrodes for electrochemiluminescence sensors

scientific article published on 20 February 2017

Corrigendum: Heparan Sulfate: A Potential Candidate for the Development of Biomimetic Immunomodulatory Membranes

scientific article published in January 2017

Design challenges of an UWB system for breast cancer detection

Different Scale Confinements of PVDF-TrFE as Functional Material of Piezoelectric Devices

EE-BESD: molecular FET modeling for efficient and effective nanocomputing design

Electrically Driven Microengineered Bioinspired Soft Robots

scientific article published on 11 January 2018

Electromigration Feedback Controlled Nanogaps Fabrication Based on MPTMS Adhesion Layer

Electrophoretic deposition of mesoporous bioactive glass on glass-ceramic foam scaffolds for bone tissue engineering

scientific article published on 13 January 2015

Electrostatically gated nanofluidic membrane for ultra-low power controlled drug delivery

scientific article published on 06 April 2020

Electrothermal modelling for EIBJ nanogap fabrication

Embedded Bio-Mimetic System for Functional Electrical Stimulation Controlled by Event-Driven sEMG

scientific article published on 10 March 2020

Embedded sensors for Micro Transdermal Interface Platforms (MicroTIPs)

Enabling Smart System design with the SMAC Platform

Engineered 3D Cardiac Fibrotic Tissue to Study Fibrotic Remodeling.

scientific article

Euro training courses of microsystems technology and nanotechnology for electronics

European master programs in nanoelectronics and microsystems

Event-driven encoding of off-the-shelf tactile sensors for compression and latency optimisation for robotic skin

Exploiting a latchup circuit via commercial CMOS technologies

Facile functionalization by π-stacking of macroscopic substrates made of vertically aligned carbon nanotubes: Tracing reactive groups by electrochemiluminescence

Feasibility study of a latchup-based particle detector exploiting commercial CMOS technologies

Flexible Electrochemical Biochip Array of Patterned Gold on Silver Inkjet Printed Polyimide

Functionalized single ZnO-metal junction as a pH sensor

Google Glass-Directed Monitoring and Control of Microfluidic Biosensors and Actuators

scientific article

Guest Editorial—Special Issue on Selected Papers From IEEE BioCAS 2015

Highly Conductive Copper Film on Inkjet-Printed Porous Silver Seed for Flexible Electronics

Highly elastomeric poly(glycerol sebacate)-co-poly(ethylene glycol) amphiphilic block copolymers

scientific article

Hydrogel bioprinted microchannel networks for vascularization of tissue engineering constructs

scientific article

Impact of crystallisation processes on depth profile formation in sol–gel PbZr0·52Ti0·48O3 thin films

journal article; published in Advances in Applied Ceramics in 2013

Improving the signal-to-noise ratio of an ECL-based sensor using ad hoc carbon nanotube electrodes

article published in 2012

Injection molded lab-on-a-disc platform for screening of genetically modified E. coli using liquid-liquid extraction and surface enhanced Raman scattering.

scientific article published on 16 February 2018

Integrated bio-inspired systems: An event-driven design framework

article

Interface of a single ZnO-nanowire assembled onto custom-fabricated nanogap device for UV sensing applications

Live demonstration: A smart camera for real-time monitoring of fluorescent cell biomarkers

scholarly article published October 2014

Live demonstration: An IoT smartwatch-based system for intensive care monitoring

scholarly article published October 2017

Live demonstration: An ultra-low power PFM IR-UWB system for short-range audio streaming

scholarly article published May 2015

Low power wireless ultra-wide band transmission of bio-signals

article

Low-latency asynchronous networking for the IoT: Routing analog pulse delays using IR-UWB

Low-power architecture for integrated CMOS bio-sensing

MECA, the microelectronics cloud alliance

MEMS-based blood cell counting system

Memristor cellular automata for image pattern recognition and clinical applications

scholarly article published May 2016

Memristor cellular automata through belief propagation inspired algorithm

Microsystems for Blood Cell Counting

Modular framework for molecular-FET device-to-circuit modeling

Molecular QCA: A write-in system based on electric fields

Molecular transistor circuits: From device model to circuit simulation

NanoCube: A Low-Cost, Modular, and High-Performance Embedded System for Adaptive Fabrication and Characterization of Nanogaps

Nanogap structures for molecular nanoelectronics

scientific article published on 9 February 2012

Nanogap-based enzymatic-free electrochemical detection of glucose

Nanolab fabrication for nanoelectronics and sensors

Nanosized Optoelectronic Devices Based on Photoactivated Proteins

scientific article published on 17 October 2012

New design methodology for MEMS-electronic-package co-design and validation for inertial sensor systems

scholarly article published April 2015

On Integration and Validation of a Very Low Complexity ATC UWB System for Muscle Force Transmission

scientific article published on 20 May 2015

On exploiting a latchup-based detector via commercial CMOS technologies

One-Dimensional ZnO/Gold Junction for Simultaneous and Versatile Multisensing Measurements.

scientific article published on 13 July 2016

Paradigm-Shifting Players for IoT: Smart-Watches for Intensive Care Monitoring

article published in 2017

Pattern-Reversal Visual Evoked Potential on Smart Glasses

scientific article published on 15 February 2019

Polyester μ-assay chip for stem cell studies

scientific article

Pyrolyzed bamboo electrode for electrogenerated chemiluminescence of Ru(bpy)32+

Quantitative estimation of biological cell surface receptors by segmenting conventional fluorescence microscopy images

Raspberry Pi Based System for Portable and Simultaneous Monitoring of Anesthetics and Therapeutic Compounds

Raspberry Pi driven flow-injection system for electrochemical continuous monitoring platforms

Raspberry-Pi based system for propofol monitoring

Reliable redundancy with memristive-biosensors to achieve statistical significance in immunosensing

Remote magnetic switch off microgate for nanofluidic drug delivery implants

scientific article published in June 2017

Remotely controlled nanofluidic implantable platform for tunable drug delivery

scientific article published on 01 June 2019

Sensor system for on-line monitoring of cell cultures

article

Simulation and Design of a Cell-Based Digital Microfluidic Chip for Continuous Monitoring of Acute Toxic Chemicals

article

Simultaneous quantification of multiple bacterial metabolites using surface-enhanced Raman scattering

scientific article published on 01 February 2019

Structure and properties of metal-free conductive tracks on polyethylene/multiwalled carbon nanotube composites as obtained by laser stimulated percolation

scholarly article in Carbon, vol. 61, September 2013

Synthesis and characterization of hybrid hyaluronic acid-gelatin hydrogels.

scientific article published on 28 March 2013

TAMTAMS: A flexible and open tool for UDSM process-to-system design space exploration

TAMTAMS: An open tool to understand nanoelectronics

Tackling Technical Research

The active modulation of drug release by an ionic field effect transistor for an ultra-low power implantable nanofluidic system

scientific article

Towards Multi-Domain and Multi-Physical Electronic Design

Towards a molecular QCA wire: simulation of write-in and read-out systems

Training a classifier for activity recognition using body motion simulation

Transcutaneously refillable, 3D-printed biopolymeric encapsulation system for the transplantation of endocrine cells

scientific article published on 30 May 2018

UWB microwave imaging for breast cancer detection

Unexpected behaviors in molecular transport through size-controlled nanochannels down to the ultra-nanoscale.

scientific article

Use of nanogap structures for molecular nanoelectronics

article published in 2011

Using a Minimum Set of Wearable Sensors to Assess Quality of Movement in Stroke Survivors

scholarly article published July 2017

Wearable and flexible pedobarographic insole for continuous pressure monitoring

Wireless Multi-channel Quasi-digital Tactile Sensing Glove-Based System

Wireless monitoring in intensive care units by a 3D-printed system with embedded electronic

Wireless ultra-wide-band transmission prototype ASICs for low-power space and radiation applications

article

Work-in-Progress: MicroElectronics Cloud Alliance

Work-in-progress: MicroElectronics Cloud Alliance

pH-triggered conduction of amine-functionalized single ZnO wire integrated on a customized nanogap electronic platform

scientific article published on 31 January 2014