Search filters

List of works by Philip Harrison

A Normalisation Procedure for Biaxial Bias Extension Tests

article

A Simple Anisotropic Fiber Reinforced Hyperelastic Constitutive Model for Woven Composite Fabrics

A constituent-based predictive approach to modelling the rheology of viscous textile composites

article by Philip Harrison et al published July 2004 in Composites Part A: Applied Science and Manufacturing

Algorithm for the solution of elastoplastic half-space impact: Force-indentation linearisation method

scientific article

Characterisation and modelling of a transversely isotropic melt-extruded low-density polyethylene closed cell foam under uniaxial compression

Characterising and modelling variability of tow orientation in engineering fabrics and textile composites

article by F. Abdiwi et al published May 2012 in Composites Science and Technology

Characterising the shear–tension coupling and wrinkling behaviour of woven engineering fabrics

Characterization of mechanical behavior of woven fabrics: Experimental methods and benchmark results

Comparisons of novel and efficient approaches for permeability prediction based on the fabric architecture

Constitutive modelling of impregnated continuous fibre reinforced composites Micromechanical approach

Corrigendum to ‘Evaluation of normalisation methods for uniaxial bias extension tests on engineering fabrics’

article

Erratum to “Finite element forming simulation for non-crimp fabrics using a non-orthogonal constitutive equation” [Composites Part A 36 (2005) 1079–1093]

scholarly article published in Composites Part A: Applied Science and Manufacturing

Evaluating the performance of microstructure generation algorithms for 2-d foam-like representative volume elements

Evaluating the use of digital image correlation for strain measurement in historic tapestries using representative deformation fields

Finite element forming simulation for non-crimp fabrics using a non-orthogonal constitutive equation

Forming simulation of a thermoplastic commingled woven textile on a double dome

article by A. Willems et al published April 2008 in International Journal of Material Forming

Improving the accuracy of the uniaxial bias extension test on engineering fabrics using a simple wrinkle mitigation technique

article

Large-strain behaviour of Magneto-Rheological Elastomers tested under uniaxial compression and tension, and pure shear deformations

Modeling, Characterization, and Processing of Advanced Composites

Modelling the forming mechanics of engineering fabrics using a mutually constrained pantographic beam and membrane mesh

article by Philip Harrison published February 2016 in Composites Part A: Applied Science and Manufacturing

Normalisation of biaxial bias extension test results considering shear tension coupling

article

Normalization of Shear Test Data for Rate-independent Compressible Fabrics

Optimum consolidation of self-reinforced polypropylene composite and its time-dependent deformation behavior

Predictive modelling for optimization of textile composite forming

article by H. Lin et al published December 2007 in Composites Science and Technology

Rate dependent modelling of the forming behaviour of viscous textile composites

article by Philip Harrison et al published November 2011 in Composites Part A: Applied Science and Manufacturing

Shear characterisation of viscous woven textile composites: a comparison between picture frame and bias extension experiments

article

Ultra-rapid, sustainable and selective synthesis of silicon carbide powders and nanomaterials via microwave heating

scholarly article by Lucia Carassiti et al published 2011 in Energy and Environmental Science

Wrinkling in engineering fabrics: a comparison between two different comprehensive modelling approaches

scientific article published on 08 August 2018

Paulina is supported by:

About Paulina

Help