A Tensegrity Paradigm for Minimal Mass Design of Roofs and Bridges

A discrete-to-continuum approach to the curvatures of membrane networks and parametric surfaces

A lumped stress method for plane elastic problems and the discrete-continuum approximation

A minimal mass deployable structure for solar energy harvesting on water canals

A mixed lumped stress–displacement approach to the elastic problem of masonry walls

A multiscale approach to the elastic moduli of biomembrane networks.

scientific article published on 17 February 2012

A penalty model for the analysis of curved composite beams

A penalty model for the analysis of laminated composite shells

A tensegrity approach to the optimal reinforcement of masonry domes and vaults through fiber-reinforced composite materials

A thrust network approach to the equilibrium problem of unreinforced masonry vaults via polyhedral stress functions

A variational constitutive model for soft biological tissues

scientific article published in January 2008

ACCURATE NUMERICAL METHODS FOR STUDYING THE NONLINEAR WAVE-DYNAMICS OF TENSEGRITY METAMATERIALS

Accordion-like metamaterials with tunable ultra-wide low-frequency band gaps

article published in 2018

An accurate one-dimensional theory for the dynamics of laminated composite curved beams

Angular Dependence of Highly Nonlinear Pulse Splitting in a Two Dimensional Granular Network

Anisotropic constitutive equations and experimental tensile behavior of brain tissue.

scientific article published on 29 November 2005

Bending dominated response of layered mechanical metamaterials alternating pentamode lattices and confinement plates

Bidirectional Barbed Suture in Total Laparoscopic Hysterectomy and Lymph Node Dissection for Endometrial Cancer: Technical Evaluation and 1-Year Follow-Up of 61 Patients

scientific article published on 01 April 2013

Biomechanics of traumatic brain injury

scholarly article by Tamer El Sayed et al published October 2008 in Computer Methods in Applied Mechanics and Engineering

Buckling behavior of curved composite beams with different elastic response in tension and compression

Cohesive interface behaviour and local shear strains in axially loaded composite annular tubes

scientific article

Complementary energy variational approach for plane elastic problems with singularities

Composite solar façades and wind generators with tensegrity architecture

Computational assessment of ballistic impact on a high strength structural steel/polyurea composite plate

Continuum limits of bistable spring models of carbon nanotube arrays accounting for material damage

article

DEPENDENCE OF THE MECHANICAL PROPERTIES OF PENTAMODE MATERIALS ON THE LATTICE MICROSTRUCTURE

Development of in-house composite wire based feed stock filaments of fused deposition modelling for wear-resistant materials and structures

article

Dimensional accuracy analysis of coupled fused deposition modeling and vapour smoothing operations for biomedical applications

Directional Wave Propagation in a Highly Nonlinear Square Packing of Spheres

EXPERIMENTAL AND NUMERICAL STUDY OF WAVE DYNAMICS IN TENSEGRITY COLUMNS

article

Effect of single particle size, double particle size and triple particle size Al2O3 in Nylon-6 matrix on mechanical properties of feed stock filament for FDM

Effects of recycled PET fibres on the mechanical properties and seawater curing of Portland cement-based concretes

Eigenfracture: An Eigendeformation Approach to Variational Fracture

Energy release rates for delamination of composite beams

Epoxy/glass fibres composites for civil applications: Comparison between thermal and microwave crosslinking routes

Error Estimates for a Lumped Stress Method for Plane Elastic Problems

article

Experimental and Numerical Study on the Lateral-Torsional Buckling of Steel C-Beams with Variable Cross-Section

Experimental investigation of the softening–stiffening response of tensegrity prisms under compressive loading

Experimental investigations for mechanical and metallurgical properties of friction stir welded recycled dissimilar polymer materials with metal powder reinforcement

Experimental response of additively manufactured metallic pentamode materials confined between stiffening plates

Experimental study of the thermo-mechanical properties of recycled PET fiber-reinforced concrete

Free discontinuity finite element models in two-dimensions for in-plane crack problems

article published in 2007

Friction welding of dissimilar plastic/polymer materials with metal powder reinforcement for engineering applications

Graphene as biomedical sensing element: State of art review and potential engineering applications

article

High-Performance Nylon-6 Sustainable Filaments for Additive Manufacturing

scientific article published on 28 November 2019

Highly nonlinear solitary wave propagation in Y-shaped granular crystals with variable branch angles.

scientific article published on 6 March 2012

INNOVATIVE DEVICES FOR THE BASE ISOLATION OF EXISTING BUILDINGS

article published in 2017

INNOVATIVE STRUCTURES FOR DYNAMIC SOLAR FAÇADES

Incremental auxetic response of composite lattices under isotropic prestress

Investigation for surface finish improvement of FDM parts by vapor smoothing process

article published in 2017

Investigations for mechanical properties of Hap, PVC and PP based 3D porous structures obtained through biocompatible FDM filaments

Limit analysis of masonry structures with free discontinuities

Load carrying capacity of 2D FRP/strengthened masonry structures

MINIMAL MASS DESIGN OF STRENGTHENING TECHNIQUES FOR PLANAR AND CURVED MASONRY STRUCTURES

Mechanical modeling of innovative metamaterials alternating pentamode lattices and confinement plates

Meta-tensegrity: Design of a tensegrity prism with metal rubber

Metal matrix composite from recycled materials by using additive manufacturing assisted investment casting

Minimum mass design of tensegrity bridges with parametric architecture and multiscale complexity

article by R.E. Skelton et al published June 2014 in Mechanics Research Communications

Modeling and in situ identification of material parameters for layered structures based on carbon nanotube arrays

article

Modeling microscale instabilities in compressed carbon nanotube bundles using multistable spring models

Multi-Material Additive Manufacturing of Sustainable Innovative Materials and Structures

scientific article published on 04 January 2019

Multi-scale modeling and characterization of innovative materials and structures

Multiscale Mass-Spring Model for High-Rate Compression of Vertically Aligned Carbon Nanotube Foams

Multiscale Mass-Spring Models of Carbon Nanotube Arrays Accounting for Mullins-like Behavior and Permanent Deformation

Multiscale mass-spring models of carbon nanotube foams

Multiscale tunability of solitary wave dynamics in tensegrity metamaterials

article published in 2014

Non-linear elastic response of layered structures, alternating pentamode lattices and confinement plates

Nonlinear elastic stress analysis in curved composite beams

article published in 1997

ON THE OPTIMAL DESIGN OF CABLE-STAYED BRIDGES

OPTIMAL DESIGN AND ADDITIVE MANUFACTURING OF NOVEL REINFORCING ELEMENTS FOR COMPOSITE MATERIALS

On a moderate rotation theory of thin-walled composite beams

On the Structural Shape Optimization through Variational Methods and Evolutionary Algorithms

scholarly article by Fernando Fraternali et al published June 2011 in Mechanics of Advanced Materials and Structures

On the additive manufacturing of an energy storage device from recycled material

On the additive manufacturing, post-tensioning and testing of bi-material tensegrity structures

On the convergence of 3D free discontinuity models in variational fracture

On the estimation of the curvatures and bending rigidity of membrane networks via a local maximum-entropy approach

On the mechanical modeling of the extreme softening/stiffening response of axially loaded tensegrity prisms ⬇️

On the mechanics of tetrakis-like lattices in the stretch-dominated regime

On the minimal mass reinforcement of masonry structures with arbitrary shapes

article published in 2016

On the recyclability of polyamide for sustainable composite structures in civil engineering

On the reinforcement of cement mortars through 3D printed polymeric and metallic fibers

On the thrust surface of unreinforced and FRP-/FRCM-reinforced masonry domes

On the use of R-PET strips for the reinforcement of cement mortars

On the use of tensegrity structures for kinetic solar facades of smart buildings

On the wear properties of Nylon6-SiC-Al 2 O 3 based fused deposition modelling feed stock filament

Optimal Design of Composite Granular Protectors

Optimal prestress design of composite cable-stayed bridges

Publisher's Note: Highly nonlinear pulse splitting and recombination in a two-dimensional granular network [Phys. Rev. E82, 036603 (2010)]

Rate-independent dissipation and loading direction effects in compressed carbon nanotube arrays ⬇️

scientific article published on May 31, 2013

Recycled nylon fibers as cement mortar reinforcement

Recycling of plastic solid waste: A state of art review and future applications

STRUCTURAL ANALYSIS OF ADHESIVE BONDING FOR THICK-WALLED TUBULAR COMPOSITE PROFILES

Size effect and dynamic properties of 2D lattice materials

Solitary waves on tensegrity lattices

Special issue on composite lattices and multiscale innovative materials and structures

Surface roughness effects on the reinforcement of cement mortars through 3D printed metallic fibers

Tensegrity Modelling and the High Toughness of Spider Dragline Silk

scientific article published on 31 July 2020

Tensegrity cell mechanical metamaterial with metal rubber

Thermal characterization of recycled polymer for additive manufacturing applications

Tuning frequency band gaps of tensegrity mass-spring chains with local and global prestress

article

Universal formulae for the limiting elastic energy of membrane networks

article by B. Schmidt & Fernando Fraternali published January 2012 in Journal of the Mechanics and Physics of Solids

Waste management by recycling of polymers with reinforcement of metal powder