Adhesion performance and film formation of acrylic emulsion coating on medium density fiberboard treated with Ar plasma

Alumina and zirconia acrylate nanocomposites coatings for wood flooring: Photocalorimetric characterization

Assessing the Climate Change Impacts of Biogenic Carbon in Buildings: A Critical Review of Two Main Dynamic Approaches

Chemical surface densification of hardwood through lateral monomer impregnation and in situ electron beam polymerization, Part I: density profile and surface hardness of three hardwood species

Comparison of two encapsulation systems of UV stabilizers on the UV protection efficiency of wood clear coats

scientific article published on 5 September 2018

Densification of wood veneers by compression combined with heat and steam

article published in 2011

Deposition of Hydrophobic Functional Groups on Wood Surfaces Using Atmospheric-Pressure Dielectric Barrier Discharge in Helium-Hexamethyldisiloxane Gas Mixtures

Determination of In Situ Esterification Parameters of Citric Acid-Glycerol Based Polymers for Wood Impregnation

Determination of optimal wood-dowel welding parameters for two North American hardwood species

article published in 2013

Development of novel building composites based on hemp and multi-functional silica matrix

article

ENGINEERED WOOD FLOORING WITH A DENSIFIED SURFACE LAYER FOR HEAVY-DUTY USE

Effect of Adding UV Absorbers Embedded in Carbonate Calcium Templates Covered with Light Responsive Polymer into a Clear Wood Coating

Effect of addition of nanosized UV absorbers on the physico-mechanical and thermal properties of an exterior waterborne stain for wood

article

Effects of interior wood finishes on the lighting ambiance and materiality of architectural spaces

article by Hoda Jafarian et al published 9 February 2017 in Indoor and Built Environment

Effects of thermo-hygro-mechanical densification on the surface characteristics of trembling aspen and hybrid poplar wood veneers

Enhancing the performance of exterior waterborne coatings for wood by inorganic nanosized UV absorbers

Enhancing the water repellency of wood surfaces by atmospheric pressure cold plasma deposition of fluorocarbon film

scholarly article in RSC Advances, vol. 7 no. 46, 2017

Environmental Performance of Eastern Canadian Wood Pellets as Measured Through Life Cycle Assessment

article

Evaluating the Link between Low Carbon Reductions Strategies and Its Performance in the Context of Climate Change: A Carbon Footprint of a Wood-Frame Residential Building in Quebec, Canada

article

Evaluation of environmental impacts of citric acid and glycerol outdoor softwood treatment: Case-study

Flammability Characteristics of Green Roofs

scientific article published on 10 July 2020

Glycerol and Citric Acid Treatment of Lodgepole Pine

Hydrophobicity of hemp shiv treated with sol-gel coatings

Improved water repellency of black spruce wood surfaces after treatment in carbon tetrafluoride plasmas

Improvement of White Spruce Wood Dimensional Stability by Organosilanes Sol-Gel Impregnation and Heat Treatment

scientific article published on 21 February 2020

Kinetic studies of UV-waterborne nanocomposite formulations with nanoalumina and nanosilica

LEED v4: Where Are We Now? Critical Assessment through the LCA of an Office Building Using a Low Impact Energy Consumption Mix

scientific article published in 2017

MINIMIZING FLOORING STRIP WEIGHT: A SHAPE OPTIMIZATION APPROACH

Main Motivations and Barriers for Using Wood in Multi-Story and Non-Residential Construction Projects

Mechanical and optical properties of clay-based nanocomposites coatings for wood flooring

Mechanical behaviour of sugar maple in cantilever bending under constant and variable relative humidity conditions

article by F Segovia et al published November 2013 in International Wood Products Journal

Metal Oxide Sol-Gels (ZrO2, AlO(OH), and SiO2) to Improve the Mechanical Performance of Wood Substrates

Modification of Sugar Maple (Acer saccharum) and Black Spruce (Picea mariana) Wood Surfaces in a Dielectric Barrier Discharge (DBD) at Atmospheric Pressure

article by Frédéric Busnel et al published January 2010 in Journal of Adhesion Science and Technology

Moisture-induced stresses in engineered wood flooring with OSB substrate

Nanocharacterization techniques for investigating the durability of wood coatings

Nanoclay dispersion effects on UV coatings curing

Nanocrystalline Cellulose as Effect Pigment in Clear Coatings for Wood

Nanocrystalline cellulose (NCC): A renewable nano-material for polyvinyl acetate (PVA) adhesive

OSB as substrate for engineered wood flooring

Parametric study of a yellow birch surface impregnation process

scientific article published on 29 March 2021

Performance of exterior semitransparent PVDF–acrylic coatings

Preparation and characterisation of flame retardant encapsulated with functionalised silica-based shell

Prospects for Appearance Wood Products Ecodesign in the Context of Nonresidential Applications

Reducing the environmental footprint of interior wood doors in non-residential buildings – part 2: ecodesign

Regionalised Life Cycle Assessment of Bio-Based Materials in Construction; the Case of Hemp Shiv Treated with Sol-Gel Coatings

scientific article published on 15 September 2019

Role of substrate outgassing on the formation dynamics of either hydrophilic or hydrophobic wood surfaces in atmospheric-pressure, organosilicon plasmas

Steatite Powder Additives in Wood-Cement Drywall Particleboards

scientific article published on 29 October 2020

Studying dispersion quality of nanoparticles into a bio-based coating

Surface Preparation of Wood for Application of Waterborne Coatings

Synthesis and incorporation of poly(methyl methacrylate) microspheres with UV stabilizers in wood clear coating binder

Tailor made OSB for special application

The Effect of Wood Ash as a Partial Cement Replacement Material for Making Wood-Cement Panels

scientific article published on 28 August 2019

The Multifactorial Aspect of Wood Weathering: A Review Based on a Holistic Approach of wood Degradation Protected by Clear Coating

article

The Use of Low-pressure Plasma on Enhancing the Attachment of Al2O3 Nanoparticles to Wood–Plastic Composites

The environmental footprint of interior wood doors in non-residential buildings – part 1: life cycle assessment

Thermal characterization of bio-based phase changing materials in decorative wood-based panels for thermal energy storage

UV-LED Curing Efficiency of Wood Coatings

UV-waterborne polyurethane-acrylate nanocomposite coatings containing alumina and silica nanoparticles for wood: mechanical, optical, and thermal properties assessment

Ultrasonication Technique: A Method for Dispersing Nanoclay in Wood Adhesives

Understanding energy consumption in high-performance social housing buildings: A case study from Canada

article

Using life cycle thinking to analyze environmental labeling: the case of appearance wood products

Weathering of wood coated with semi-clear coating: Study of interactions between photo and biodegradation

scholarly article by Antoine Cogulet et al published April 2018 in International Biodeterioration and Biodegradation

Weathering resistance of opaque PVDF-acrylic coatings applied on wood substrates

Wood Cladding in Non-residential Construction: Overcoming the Barriers to Leverage the Opportunities

Wood degradation under UV irradiation: A lignin characterization

scientific article

Wood-Dowel Bonding by High-Speed Rotation Welding — Application to Two Canadian Hardwood Species