Analysis of the infrared spectrum and microstructure of hardened cement paste

Anti-corrosion performance of oxidized and oxygen plasma-implanted NiTi alloys

article

Application of shape memory alloy as detector material for far-infrared imaging transducers

Biomimetic deposition process of an apatite coating on NiTi shape memory alloy

Capacity fading of pulsed-laser deposited HT-LiCoO2 films cycled in LiClO4/PC

Cobalt-copper layered double hydroxide nanosheets as high performance bifunctional catalysts for rechargeable lithium-air batteries

scholarly article by Ying Liu et al published December 2016 in Journal of Alloys and Compounds

Conformal Coating of Heterogeneous CoO/Co Nanocomposites on Carbon Nanotubes as Efficient Bifunctional Electrocatalyst for Li-Air Batteries

Corrosion resistance, surface mechanical properties, and cytocompatibility of plasma immersion ion implantation-treated nickel-titanium shape memory alloys.

scientific article published in November 2005

DSC study of the effect of aging temperature on the reverse martensitic transformation in porous Ni-rich NiTi shape memory alloy fabricated by combustion synthesis

Effect of carbon nanotubes and their dispersion on thermal curing of polyimide precursors

Effect of graphite addition on martensitic transformation and damping behavior of NiTi shape memory alloy

article

Effect of heat treatment time on microstructure and mechanical properties of Ti–19Nb–9Zr (at%) shape memory alloy

Effect of mechanical alloying on the solid state reaction processing of Ni-36.5 at.% Al alloy

Effect of parent phase ageing on CuZnAl shape memory alloys with Mn and Zr addition

article

Effect of rare earth element Nd on the ductility and fracture behavior of a Ni-rich NiAl alloy

Effect of thermo-mechanical treatment on superelastic behavior of Ti–19Nb–14Zr (at.%) shape memory alloy

Effects of anodic oxidation in H2SO4 electrolyte on the biocompatibility of NiTi shape memory alloy

Effects of coating process on the characteristics of Ag–SnO2 contact materials

Effects of water plasma immersion ion implantation on surface electrochemical behavior of NiTi shape memory alloys in simulated body fluids

Electrochemical characterization of diamond like carbon thin films

Electrochemical performance and kinetic behavior of lithium ion in Li 4 Ti 5 O 12 thin film electrodes

Electrochemical performance of LiNi1/3Co1/3Mn1/3O2 thin film electrodes prepared by pulsed laser deposition

Electrochemical performance of all-solid-state lithium batteries using inorganic lithium garnets particulate reinforced PEO/LiClO4 electrolyte

Fabrication and characteristics of bioactive sodium titanate/titania graded film on NiTi shape memory alloy.

scientific article published in December 2005

Fabrication and properties of porous NiTi shape memory alloys for heavy load-bearing medical applications

Fabrication of LiF/Fe/Graphene nanocomposites as cathode material for lithium-ion batteries.

scientific article

Fabrication of Titania Film on NiTi Alloy by a Deposition-Assisted Advanced Oxidation Method

Facile synthesis and electrochemical characterization of Sn4Ni3/C nanocomposites as anode materials for lithium ion batteries

Facile synthesis and electrochemical characterization of porous and dense TiO2 nanospheres for lithium-ion battery applications

Facile synthesis of porous LiMn2O4 spheres as positive electrode for high-power lithium ion batteries

article

Facile synthesis of spinel CuCo2O4 nanocrystals as high-performance cathode catalysts for rechargeable Li–air batteries

scientific article published on 01 December 2014

Formation of titanium nitride barrier layer in nickel–titanium shape memory alloys by nitrogen plasma immersion ion implantation for better corrosion resistance

article

Graded surface structure in chemically polished NiTi shape memory alloy after NaOH treatment

article published in 2005

Growth of TiNiHf shape memory alloy thin films by laser ablation of composite targets

Hierarchical assembly of Ti(iv)/Sn(ii) co-doped SnO2 nanosheets along sacrificial titanate nanowires: synthesis, characterization and electrochemical properties

scientific article published on 01 August 2013

High porosity and large pore size shape memory alloys fabricated by using pore-forming agent (NH4HCO3) and capsule-free hot isostatic pressing

Hydrogen release from titanium hydride in foaming of orthopedic NiTi scaffolds

scientific article published on 20 October 2010

Improvement of electrochemical performance of Si thin film anode by rare-earth La PIII technique

article published in 2007

Improvements of anti-corrosion and mechanical properties of NiTi orthopedic materials by acetylene, nitrogen and oxygen plasma immersion ion implantation

article

In situ synthesis of nanostructured titania film on NiTi shape memory alloy by Fenton's oxidation method

In vitro and in vivo characterization of novel plasma treated nickel titanium shape memory alloy for orthopedic implantation

scholarly article by K.W.K. Yeung et al published December 2007 in Surface & Coatings Technology

In vitro bioactivity and osteoblast response on chemically modified biomedical porous NiTi synthesized by capsule-free hot isostatic pressing

article

In vitro corrosion behavior of TiN layer produced on orthopedic nickel–titanium shape memory alloy by nitrogen plasma immersion ion implantation using different frequencies

scholarly article by X.M. Liu et al published February 2008 in Surface & Coatings Technology

Incommensurate modulated structure study of a Cu–Zn–Al–Zr phase

Investigation of nickel suppression and cytocompatibility of surface-treated nickel-titanium shape memory alloys by using plasma immersion ion implantation.

scientific article published in March 2005

Ionic Liquid Mediated Synthesis of Lath Shaped CuO Micro-Assembles as Extremely Stable Anode Material for Lithium-Ion Batteries

Large-scale fabrication of graphene-wrapped FeF3 nanocrystals as cathode materials for lithium ion batteries

scientific article published on 12 June 2013

Layered Li2MnO3·3LiNi0.5−xMn0.5−xCo2xO2 microspheres with Mn-rich cores as high performance cathode materials for lithium ion batteries

scientific article published on 20 August 2013

MgNi/Pd multilayer hydrogen storage thin films prepared by dc magnetron sputtering

Microstructure and hydrogen absorption properties of nano-phase composite prepared by mechanical alloying of MmNi5−x(CoAlMn)x and Mg

Microstructure and martensitic transformation behavior of porous NiTi shape memory alloy prepared by hot isostatic pressing processing

Microstructure of MmM(5)/Mg multi-layer hydrogen storage films prepared by magnetron sputtering.

scientific article published in July 2004

Microstructure of MmM5/Mg multi-layer films prepared by magnetron sputtering

Microwave-assisted hydrothermal synthesis of porous SnO2 nanotubes and their lithium ion storage properties

article published in 2012

MmM5/Mg multi-layer hydrogen storage thin films prepared by dc magnetron sputtering

Nano-scale surface morphology, wettability and osteoblast adhesion on nitrogen plasma-implanted NiTi shape memory alloy.

scientific article

Nanophase decomposition in eutectoid Zn–Al based alloy films

New plasma surface-treated memory alloys: Towards a new generation of “smart” orthopaedic materials

NiTi shape memory alloy thin film micro-cantilevers array

NiTi shape memory alloy thin film sensor micro-array for detection of infrared radiation

Nickel release behavior, cytocompatibility, and superelasticity of oxidized porous single-phase NiTi

scientific article published on 01 June 2007

Nitrogen plasma-implanted nickel titanium alloys for orthopedic use

scholarly article by K.W.K. Yeung et al published February 2007 in Surface & Coatings Technology

On nanophase stability in eutectoid Zn–Al based alloy films

article published in 2004

Optimization of thermal treatment parameters to alter austenitic phase transition temperature of NiTi alloy for medical implant

Oxygen plasma treatment to restrain nickel out-diffusion from porous nickel titanium orthopedic materials

scholarly article by J.P.Y. Ho et al published February 2007 in Surface & Coatings Technology

Passivation and oxygen ion implantation double surface treatment on porous NiTi shape memory alloys and its Ni suppression performance

Periodic porous silicon thin films with interconnected channels as durable anode materials for lithium ion batteries

Phase transformation behavior of porous NiTi alloys fabricated by capsule-free hot isostatic pressing

Phase transformation behaviors in porous Ni-rich NiTi shape memory alloy fabricated by combustion synthesis

Pore formation mechanism and characterization of porous NiTi shape memory alloys synthesized by capsule-free hot isostatic pressing

Preparation and electrochemical properties of Li4Ti5O12 thin film electrodes by pulsed laser deposition

Preparation of CuAlNi-based shape memory alloys by mechanical alloying and powder metallurgy method

Preparation of metastable precursors with different compositions of Ti–Al–Si by mechanical alloying

article

Preparation of solid electrolyte PVDF on MOS 2 in Silicon MCP for three-dimensional Li ion microbatteries

Pulsed laser deposition of NiTi shape memory alloy thin films with optimum parameters

Relationship between osseointegration and superelastic biomechanics in porous NiTi scaffolds

scientific article published on 01 January 2011

Removal of martensite stabilisation in CANTiM shape memory alloy by post-quench ageing

Reverse transformations in CuAlNiMnTi alloy at elevated temperatures

Scanning Electron Microscopic Study of Rotary Nickel-Titanium Endodontic File (RNEF)

scholarly article published August 2013

Single-crystalline Li4Ti5O12 nanorods and their application in high rate capability Li4Ti5O12/LiMn2O4 full cells

Slow positron annihilation studies of vacancy-type defects in the near-surface region of Cu and Nb before and after wear

Solvothermal Synthesis of Monodisperse LiFePO4Micro Hollow Spheres as High Performance Cathode Material for Lithium Ion Batteries

scientific article published on 12 September 2013

Sputtered Al-doped lithium manganese oxide films for the cathode of lithium ion battery: The post-deposition annealing temperature effect

Structure and wear properties of NiTi modified by nitrogen plasma immersion ion implantation

Superelastic behavior and microstructure of Ti19Nb9Zr1Mo (at%) alloy

Superelastic properties of porous TiNi shape memory alloys prepared by hot isostatic pressing

Surface XPS characterization of NiTi shape memory alloy after advanced oxidation processes in UV/H2O2 photocatalytic system

scholarly article by R.M. Wang et al published August 2007 in Applied Surface Science

Surface characteristics, biocompatibility, and mechanical properties of nickel-titanium plasma-implanted with nitrogen at different implantation voltages.

scientific article

Surface characteristics, mechanical properties, and cytocompatibility of oxygen plasma-implanted porous nickel titanium shape memory alloy.

scientific article published in October 2006

Surface mechanical properties, corrosion resistance, and cytocompatibility of nitrogen plasma-implanted nickel-titanium alloys: a comparative study with commonly used medical grade materials.

scientific article published in August 2007

Surface nano-architectures and their effects on the mechanical properties and corrosion behavior of Ti-based orthopedic implants

scholarly article by Shuilin Wu et al published October 2013 in Surface & Coatings Technology

Surface oxidation of NiTi shape memory alloy in a boiling aqueous solution containing hydrogen peroxide

Surface structure and biomedical properties of chemically polished and electropolished NiTi shape memory alloys

Tannic Acid/Fe3+/Ag Nanofilm Exhibiting Superior Photodynamic and Physical Antibacterial Activity.

scientific article published on 24 October 2017

The effect of pore characteristics on Ni suppression of porous NiTi shape memory alloys modified by surface treatment

The effect of porosity on phase transformation behavior of porous Ti–50.8at.% Ni shape memory alloys prepared by capsule-free hot isostatic pressing

article published in 2006

The generalization of the extended Stevens operators to higher ranks and spins, and a systematic review of the tables of the tensor operators and their matrix elements

article

Thermal cycling effects in Cu-Zn-Al shape memory alloy by positron lifetime measurementS

Thermomechanical training behavior and its dynamic mechanical analysis in an Fe-Mn-Si shape memory alloy

Two-way shape memory effect of TiNiSn alloys developed by martensitic deformation

Wear mechanism and tribological characteristics of porous NiTi shape memory alloy for bone scaffold.

scientific article published on 11 February 2013