List of works - Andy Parsons

Analysis of calvarial bone defects in rats using microcomputed tomography: potential for a novel composite material and a new quantitative measurement

scientific article published on 22 April 2009

Bioresorbable composite screws manufactured via forging process: pull-out, shear, flexural and degradation characteristics.

scientific article published on 30 November 2012

Bioresorbable screws reinforced with phosphate glass fibre: manufacturing and mechanical property characterisation.

scientific article published on 21 August 2012

Composites for bone repair: phosphate glass fibre reinforced PLA with varying fibre architecture

scientific article published on 14 June 2011

Cytocompatibility and effect of increasing MgO content in a range of quaternary invert phosphate-based glasses

scientific article published on 22 April 2009

Cytocompatibility assessment of chemical surface treatments for phosphate glass to improve adhesion between glass and polyester.

scientific article published on 26 August 2013

Cytocompatibility, mechanical and dissolution properties of high strength boron and iron oxide phosphate glass fibre reinforced bioresorbable composites.

scientific article published on 21 December 2015

Effect of boron addition on the thermal, degradation, and cytocompatibility properties of phosphate-based glasses.

scientific article published on 7 August 2013

Effect of boron oxide addition on fibre drawing, mechanical properties and dissolution behaviour of phosphate-based glass fibres with fixed 40, 45 and 50 mol% P2O5.

scientific article published on 17 June 2014

Effect of boron oxide addition on the viscosity-temperature behaviour and structure of phosphate-based glasses.

scientific article published on 9 January 2016

High cellulose nanowhisker content composites through cellosize bonding

In vitro degradation, flexural, compressive and shear properties of fully bioresorbable composite rods

scientific article published on 13 May 2011

In-situ polymerisation of fully bioresorbable polycaprolactone/phosphate glass fibre composites: In vitro degradation and mechanical properties.

scientific article published on 23 December 2015

Influence of screw holes and gamma sterilization on properties of phosphate glass fiber-reinforced composite bone plates

scientific article

Investigating the use of coupling agents to improve the interfacial properties between a resorbable phosphate glass and polylactic acid matrix.

scientific article published on 10 July 2012

Investigation of crystallinity, molecular weight change, and mechanical properties of PLA/PBG bioresorbable composites as bone fracture fixation plates.

scientific article published in December 2010

Magnesium coated bioresorbable phosphate glass fibres: investigation of the interface between fibre and polyester matrices

scientific article

Magnesium coated phosphate glass fibers for unidirectional reinforcement of polycaprolactone composites

scientific article published on 18 November 2014

Material characterisation and cytocompatibility assessment of quinternary phosphate glasses.

scientific article

Mechanical, crystallisation and moisture absorption properties of melt drawn polylactic acid fibres

Mechanical, degradation and cytocompatibility properties of magnesium coated phosphate glass fibre reinforced polycaprolactone composites.

scientific article

Neutron scattering and ab initio molecular dynamics study of cross-linking in biomedical phosphate glasses

scientific article published on 17 November 2010

Optimisation of composite bone plates for ulnar transverse fractures ⬇️

scientific article

Physico-chemical and mechanical properties of nanocomposites prepared using cellulose nanowhiskers and poly(lactic acid)

article published in 2011

Repair of calvarial defects in rats by prefabricated, degradable, long fibre composite implants.

scientific article published on 10 November 2010

Structural, thermal, in vitro degradation and cytocompatibility properties of P2O5-B2O3-CaO-MgO-Na2O-Fe2O3 glasses

Synthesis and degradation of sodium iron phosphate glasses and their in vitro cell response.

scientific article published on November 2004

The effect of production regime and crucible materials on the thermal properties of sodium phosphate glasses produced from salts.

scientific article published in October 2004

The influence of coupling agents on mechanical property retention and long-term cytocompatibility of phosphate glass fibre reinforced PLA composites.

scientific article published on 23 July 2013

List of works by Andy Parsons

Analysis of calvarial bone defects in rats using microcomputed tomography: potential for a novel composite material and a new quantitative measurement

Bioresorbable composite screws manufactured via forging process: pull-out, shear, flexural and degradation characteristics.

Bioresorbable screws reinforced with phosphate glass fibre: manufacturing and mechanical property characterisation.

Composites for bone repair: phosphate glass fibre reinforced PLA with varying fibre architecture

Cytocompatibility and effect of increasing MgO content in a range of quaternary invert phosphate-based glasses

Cytocompatibility assessment of chemical surface treatments for phosphate glass to improve adhesion between glass and polyester.

Cytocompatibility, mechanical and dissolution properties of high strength boron and iron oxide phosphate glass fibre reinforced bioresorbable composites.

Effect of boron addition on the thermal, degradation, and cytocompatibility properties of phosphate-based glasses.

Effect of boron oxide addition on fibre drawing, mechanical properties and dissolution behaviour of phosphate-based glass fibres with fixed 40, 45 and 50 mol% P2O5.

Effect of boron oxide addition on the viscosity-temperature behaviour and structure of phosphate-based glasses.

High cellulose nanowhisker content composites through cellosize bonding

In vitro degradation, flexural, compressive and shear properties of fully bioresorbable composite rods

In-situ polymerisation of fully bioresorbable polycaprolactone/phosphate glass fibre composites: In vitro degradation and mechanical properties.

Influence of screw holes and gamma sterilization on properties of phosphate glass fiber-reinforced composite bone plates

Investigating the use of coupling agents to improve the interfacial properties between a resorbable phosphate glass and polylactic acid matrix.

Investigation of crystallinity, molecular weight change, and mechanical properties of PLA/PBG bioresorbable composites as bone fracture fixation plates.

Magnesium coated bioresorbable phosphate glass fibres: investigation of the interface between fibre and polyester matrices

Magnesium coated phosphate glass fibers for unidirectional reinforcement of polycaprolactone composites

Material characterisation and cytocompatibility assessment of quinternary phosphate glasses.

Mechanical, crystallisation and moisture absorption properties of melt drawn polylactic acid fibres

Mechanical, degradation and cytocompatibility properties of magnesium coated phosphate glass fibre reinforced polycaprolactone composites.

Neutron scattering and ab initio molecular dynamics study of cross-linking in biomedical phosphate glasses

Optimisation of composite bone plates for ulnar transverse fractures ⬇️

Physico-chemical and mechanical properties of nanocomposites prepared using cellulose nanowhiskers and poly(lactic acid)

Repair of calvarial defects in rats by prefabricated, degradable, long fibre composite implants.

Structural, thermal, in vitro degradation and cytocompatibility properties of P2O5-B2O3-CaO-MgO-Na2O-Fe2O3 glasses

Synthesis and degradation of sodium iron phosphate glasses and their in vitro cell response.

The effect of production regime and crucible materials on the thermal properties of sodium phosphate glasses produced from salts.

The influence of coupling agents on mechanical property retention and long-term cytocompatibility of phosphate glass fibre reinforced PLA composites.